The block-demo-sifive from sonakbi

block-demo-sifive's Introduction

Summary

This demo project files are copied from block-pio-sifive files at first. and modified for similar to the ddr4 on-boarding environment.

They have 3 interfaces, 2 port AXI and 1 port APB as I knew. We don't have ddr4 ctl and phy verilog code, so we are using pwm and pio model instead of DDR4 verilog files as below figure.

        APB inf.       AXI inf.     AXI inf.                                     
         ^               ^            ^                                          
         |               |            |                                          
  +----- | ------------- | ---------- | --------+          
  |      |               |            |         |
  |      |               V            V         |
  |      |          +----------+ +----------+   |
  |      |          |  capctl  | |   pio    |   |
  |      |          |          | |          |   |
  |      |          +--++++++--+ +----+-----+   |
  |      |             ||||||         |         |
  |      V             ||||||         |         |
  | +------------------++++++--+ +----+-----+   |
  | |                    cap   | | loopback |   |
  | | PWM                      | |          |   |
  | |                          | +----------+   |
  | |                          |                |
  | | PTC0 PTC1 ... PTC5       |                |
  | +--------------------------+                |
  |                                     demo    |
  +---------------------------------------------+          
  (demo block : made simuiler to the structure of DDR ctl&phy)

[verilog files]
block-demo-sifive/rtl :

  ./rtl/pio/pio.sv
  ./rtl/pwm/PWM.v        : pwm verilog file
  ./rtl/pwm/PTC.v        : ptc verilog file
  ./rtl/capctl/capctl.sv : for controlling cap signal