Little Program for ESP82XX to get the 100Balance BMS data to web and MQTT

• captive portal for wifi and MQTT config
• config in webinterface
• switching MOS gates over webinterface, MQTT and via web at /set?loadstate, set SOC over MQTT
• get essential data over webinterface, get all data like cell voltage and more over MQTT
• classic MQTT datapoints or Json string over MQTT
• get Json over web at /livejson?
• firmware update over webinterface
• debug log on Wemos USB (use only if you don't supply Wemos from BMS!!!)
• wake the BMS over MQTT or keep it awake (not supported on ESP-01s)
• universal switching output (only with external power supply, not supported on ESP-01s)
• blink codes for the current state of the ESP (not supported on ESP-01s)
• Homeassistant Discovery
• External Temperatur Sensors
• with Teapod

Main screen:

Settings:

Config:

MQTT Data

• flash the bin file to an ESP8266 (recommended Wemos D1 Mini) with Tasmotizer
• connect the ESP like the wiring diagram
• search for the wifi ap "100Balance2MQTT-AP" and connect to it
• surf to 192.168.4.1 and set up your wifi and optional MQTT
• that's it :)

You are welcome to get fully stocked and tested PCB's. These are then already loaded with the lastest firmware. The earnings from the PCBs are used for the further development of existing and new projects.

If interested see here

Join the Discord Channel (German / English)