GUI and easy configuration
 Auto Benchmarks Each algo to get optimal speeds 
 Fully automated 
 Auto Downloads Miners

  Run All-in-Miner.bat
  1. Config tab
  2. Set your Wallet address and Username
  3. Select your pool/s and load default Algos button. (Remove any algos you do not want to mine)
  4. "Save Config"
  5. Close
  Run All-in-Miner.bat
  6."Start"
  
  note: 2. you only need to change Username if you are using Miningpoolhub

  There is a 8 minute per day fee (0.5%), that can be changed in the config (Minimum is 3)0.2%
  We want to stay completely transparent on the way fees are managed in the product. Donations occurs once every 24 hours for the selected amount of time (default 8 minutes). The first donation sequence occurs 1 hour after miners are started. If Interval is set higher than the donation time, the interval will prime. Example for default parameters. Miners started at 10, First donation cycle runs at 10:52 untill 11, Next donation cycle occurs 24 hours after.All donation time and addresses are recording in the logs folder.

  All-in-Miner has a GUI making it easy to configure and run.
  Relies on config files. No need to edit bat files. Simply run All-in-Miner 
  Set the config on the config tab, save, close, run

  Ability to pause miners while keeping other jobs running (pause button)
  This will stop mining activity
  BrainPlus will still run in the background avoiding the learning phase on resume
  EarningTracker will still run in the background avoiding the learning phase on resume

  Ability to run a batch prior switching to a specific algo.
  For example, can be used to set per algo OC via nvidiaInspector
  Simply create a file named <AlgoName>.bat in prerun folder
  If <AlgoName>.bat does not exist, will try to launch prerun/default.bat
  Use overclock with caution

    - **This is for advanced users. Do not use if you do not know what you are doing.**
    - You can now set specific options per pool. For example, you can mine NiceHash on the internal wallet and other pools on a valid wallet. This configuration is provided as an example in Config\PoolsConfig-NHInternal.json
      - Available options
        - Wallet = your wallet address
        - UserName = your MPH user name
        - WorkerName = your worker name
        - PricePenaltyFactor = See explanation below
      - Usage
        - The file Config\PoolsConfig.json contains per pool configuration details. If a pool is listed in this file,
    the specific settings will be taken into account. If not, the setting for the entry name default will be used.
    **Do not delete the default entry.**
        - Edit Config\PoolsConfig.json
        - Add an entry for the pool you want to customize
          - The name must be the All-in-Miner name for the pool. ie. for ahashpool, if you use Plus. The name is ahashpoolplus.
          - (**careful with json formating ;)**)
          - Best way is to duplicate the default entry
    - Note that the GUI only updates the default entry. Any other changes need to be done manualy

    - When using advanced per pool configuration, it is possible to add a penalty factor for a specific pool. This simply adds as a multiplicator on estimations presented by the pool.
    - Example scenario
      - NiceHash as a 4% fee - Set PricePenaltyFactor to 0.96 (1-0.04)
      - You feel like a pool is exaggerating his estimations by 10% - Set PricePenaltyFactor to 0.9

  Uses calculations based on 24hractual and currentestimate ahashpool prices to get more realistic estimate.
  Includes some trust index based on past 1hr currentestimate variation from 24hr.
  AND is NOT sensible to spikes.
  This shows less switching than following Current Estimate and more switching that following the 24hr Actual.
  Better profitability.

  Displays BTC/H and BTC/D as well a estimation of when the pool payment threshold will be reached.
  Supported pools:
        ahashpool
        zergpool
        zpool
        nicehash
        miningpoolhub (partial)
  If mining more that one pools, shows stats for any supported pool
  Press key e in the console window to show/hide earnings

  **Experimental**
  More than one instance of All-in-Miner can run on the same rig
  Each instance must be placed in it's own directory
  Miner has to be started prior the launch of the next instance

  Some miners are not enabled by default in All-in-Miner for a variety of reasons
  A new folder can be found called "OptionalMiners" containing .ps1 files for some miners
  For advanced users, refer to OptionalMiners\Readme.txt on how to use

  Simple algo switching log in csv switching.log file found in Logs folder.
  You can easily track switching rate.

  24hr - uses last 24hour Actual API too request profit
     -Low switching rate
  plus - uses advanced calculations to maximize profit
     -Best switching rate
  normal - uses current estimate API too request profit
     -High switching rate

  Use -UIStyle Light or -UIStyle Full in config.json
        Full = Usual display (Default)
        Light = Show only currently mining info
  UIStyle automaticaly swtiches to Full during benchmarking.

  Press key s in the window to switch between light and full display
  Press key e in the window to show/hide earnings 
  Will toggle display at next refresh

  All-in-Miner will notify new version availability