$ git clone https://github.com/SKKU-ESLAB/ANT
$ cd ANT
You can build the sensor driver code for the specific target board. The target-dependent code is in the target/ directory.
$ cd target/<TARGET_BOARD>/sensor-drivers/
$ cmake .
$ make
$ cd out/sensor-drivers/
The driver code and specification is in the out/sensor-drivers/ directory. You need to copy it to the ANT sensor driver code directory
$ cp libsensors.so ${ANT_DIR}/out/sensor-drivers/
$ cp sensor_config.json ${ANT_DIR}/out/sensor-drivers/
It is dependent on target device.
In example of Raspberry Pi 2 or 3:
$ ./target/raspberry-pi2_3/install-deps-raspberry-pi2_3.sh
$ cmake -Bbuild -H.
$ make
In example of Raspberry Pi 2 or 3:
$ sudo ./scripts/install.sh --target=raspberry-pi2_3
You need target profile on target/TARGET_NAME/profile.env
before running install script.
ANT is open source software under the Apache 2.0 license. Complete license and copyright information can be found within the code.
Copyright 2017 SKKU ESLAB, and contributors.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.