shapeforge / icesl-printers Goto Github PK

When using the "Artillery_SW_X1" profile on a stock Artillery Sidewinder X1 the extruder is running backwards.

Cure generates extruder code running from 0.x mm to (in my case) 40.x mm. IceSL starts at 40.x mm and goes down to 0.x mm, this causes the extruder to unload filament instead of loading it.

I went through the documentation but I'm not quite sure how to fix/reverse this.

Just created to let you know that I start working on the Wanhao D12 Duplicator profile.
I will create a pull request once done.
https://github.com/loic-fejoz/icesl-printers/tree/feature/wanhao_d12_duplicator

No matter what you put in the features.lua configuration file for the setting brim_distance_to_print = it stays at 1mm when you open the profile in IceSL.

This is been an issue for as along I've used the slicer which is nearly a year

Hello,
I am using the profile Raise3d_n2 Plus with a raise3D N2 printer.

When I print with 2 extruders it appears that the right extruder is not well positionned. There is a X offset equal to the distance beetween the 2 extruders.

How is it possible to modifiy the offset between the extruders in the features. lua script ?
I dot find the information in the documentation
Thank you for your help
Thierry

Is there any way to set different priming and retraction speeds as with Cura and the Slic3r family? Inspired by this article I did lots of test printing and found the perfect settings for PETG on my hot end (TriangleLabs Microswiss Clone on a stock Ender 3) to be 55m/s retraction, 15mm/s priming, and 0.3mm z-hop.

https://www.sublimelayers.com/2016/10/some-musings-on-retracts.html