Companion computer startup scripts and examples.

This repo is where you can contribute both feedback about (issues) and improvements to (PRs) ArduPilot companion computer support.

This repository is organized by board and then by OS. It follows the following structure:

Root
  |___Board1
  |     |___OS1
  |     |___OS2
  |
  |___Board2
  		|___OS1
  		|___OS2

• Companion Computers (Dev Wiki)
• Gitter chat

201709 APWeb

2017-PRIME CUAV Allow flashing of firmware via APWeb Will require users to reflash their bootloader Change username/password to ardupilot/ardupilot? Get GPS accuracies into place "Flight Board Status" in status/system needs to focus on vehicle TX1 Base on JetPack 3.2 Kernel patches for OpenKAI to work Kernel patches for serial to work Edison Attempt to fix USB OTG issue Fix Uptime entry in System Information APWeb tab base bash environment

2017-PRIMEPRIME SmartShots APWeb to drop privs Multipe IMUs on system tab Reinstate Map tab Reinstate motor-test tab mavlink2 support parameters should be updated in parameters.html if we receive a param_value message

2017-PRIMEPRIMEPRIME Multi-Camera-Daemon Graph multiple sensors in Calibration screen OpenKAI

2018-? Support for returning password in system.html - requires TX1's Ubuntu to have an nmcli that supports -s properly

Ask people if they would update their bootloader

• at the risk of needing JTAG to recover their boards
• but with the possibility of updating their PixHawk over serial