Sync your environment files securely with public/private key encryption via AWS S3.

envsync is a CLI tool designed to securely synchronize your .env files across different machines. It uses public/private key encryption for security and AWS S3 for storage.

• init: Initialize your envsync. This command sets up public/private keys and configures AWS S3.
• push: Push your .env file from the current directory to the S3 bucket.
• pull: Pull your .env file from the S3 bucket to the current directory.

1. S3 Bucket: Set up an S3 bucket, e.g., your-s3-bucket.

2. IAM User: Create an IAM user in AWS and attach the following policy for necessary permissions:

   {
       "Version": "2012-10-17",
       "Statement": [
           {
               "Sid": "VisualEditor0",
               "Effect": "Allow",
               "Action": [
                   "s3:PutObject",
                   "s3:PutObjectAcl",
                   "s3:GetObject"
               ],
               "Resource": "arn:aws:s3:::your-s3-bucket/*"
           }
       ]
   }

3. AWS Credentials: Note down the IAM user’s access_key_id and secret_access_key.

Run envsync init and input the AWS configuration when prompted. This will set up the necessary keys and configuration for envsync.

Pushing .env File:

To push the .env file from your current directory to S3, run:

envsync push --name=your_project_name

This command encrypts your .env file and stores it at your-s3-bucket/your_project_name/.env in S3.

Pulling .env File:

To pull the .env file from S3, run:

envsync pull --name=your_project_name

For team collaboration, follow these steps:

1. IAM Permissions: Ensure team members have the necessary IAM permissions (refer to the policy mentioned above).

2. Key Sharing: Share the public and private keys located in $HOME/.envsync/ with your team or you create your own public/private key pair and configure to use via your own config.yaml file and share with the team. You can create your own key pair using the following command...

ssh-keygen -t rsa -b 2048 -f private_key.pem && mv private_key.pem.pub public_key.pem && ssh-keygen -p -m PEM -f private_key.pem

3. Team Setup: Get private_key.pem and public_key.pem and configure your config.yaml like the following.

aws:
  region: ap-southeast-1
  s3_bucket: your-s3-bucket
  access_key_id: your-aws-access-key
  secret_access_key: your-aws-secret-key
envsync:
  private_key: ~/.envsync/private_key.pem # Replace with private_key path
  public_key: ~/.envsync/public_key.pem   # Replace with public_key path

And run pull or pull like the following

envsync pull --name=your_project_name --config=config.yaml