An implementation of a wireless Klipper status display on an ESP32 + screen. Uses Moonraker to fetch data.

A simple and cheap solution to use a dedicated screen with Klipper, a 3d printing Firmware.

A ESP32-2432S028R is required to run this project. You can find out where to buy these on the "ESP32 Cheap Yellow Display" repository.

• View printer status
• View print progress and print statistics
• Start a print
• (When the printer is idle) move the printer
• (During a print) set fan speed, flow rate, speed and z offset
• Manage temperature
• Extrude/Retract filament
• Execute predefined gcode macros
• Toggle Moonraker power devices
• OTA updates

There is a web-based installer available. This is only supported on Chrome, Edge or Opera, and only on Desktop.

On initial install, all data should be wiped. On updates, data should be able to be kept without issues.

When there is an update available, a button in the settings will appear that can be pressed to update. If automatic updates are preferred, there is a toggle in the settings to automatically update. This will right after connecting to wifi update the screen.

If you found this project helpful, please consider a donation to my Ko-Fi. It would help out a lot in the development of this project, due to the need to buy the screens.

Thank you!

(Quite literally shots of the screen. I'm sorry)

-	-

• xtouch
• ESP32-Cheap-Yellow-Display
• OperatorB for the ESP32-3248S035C display driver
• esp32-smartdisplay