Matrix Invert Kernels for Sdx Platforms

Examples were only built and tested on U250 although most will fit in U200 as well. For the U200 you can set he NUMBER_OF_KERNELS to a smaller value. Only Supported Values for NUMBER_OF_KERNELS are 1,2,4.

System requirements:

1. Alveo card (Tested on U200 and U250)
2. Xilinx Vitis 2019.2 tool chain
3. Xilinx XRT xrt_201920.2.3.1301_7.4.1708-xrt.rpm
4. Xilinx deployment Shell xilinx-u250-xdma-201830.2-2580015.x86_64.rpm (for U250)
5. Xilinx development Shell xilinx-u250-xdma-dev-201830.2-2580015.x86_64.rpm (for U250)

Below is the syntax to build Hardware files on U250

% make all TARGET=hw DEVICE=xilinx_u250_xdma_201830_2

Once built, to Execute the kernel on the U250 Card:

% ./sdx_cppKernel_top ./xclbin/sdx_cppKernel_top.hw.xilinx_u250_xdma_201830_2.xclbin