building-sat-'s People
building-sat-'s Issues
FINAL RESULTS DISPLAY ERROR
Describe the bug
In the final results section of a project, in the ''Project summary'' the kgCO2 - eq totals for energy and kgCO2-eq for water are not shown. The two values for energy and water should also be displayed as requested in attached document. Kindly refer to ''Project summary'' table.
results- summery (2).docx
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Transport pop up
Describe the bug
Is it possible to remove the 'cradle to gate' words JUST IN the Transport dropdown pop up. Refer screenshot.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Glitch
Describe the bug
A glitch was encountered when entering the data using the dropdowns.
To Reproduce
Unable to explain as this occurs from time to time but managed to capture a screen
important_Trim.2.mp4
recording
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Create new project
Describe the bug
When the user creates a new project they will be choosing a country and a location. The country entry is fine where the user can choose a country from the dropdown. However, if the user is to choose a location of cities that is not available in trh dropdown, they should be able to type in a city of their choice.
To Reproduce
Create new project> Location
Expected behavior
User should be able to type in the location of any city (if not available in dropdown) and proceed.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Landfill and salvage - ISSUE 1
Describe the bug
If the user enters salvage % as 0% the rest of the fields are left blank. This should not be the case. Even if the user enters salvage % as 0%, the landfill % should be displayed as 100% and the calculation should proceed as normal to display the other field values.
Also if the user changes the salvage% from a different value to 0%, then the calculation does not get adjusted accordingly.
To Reproduce
Steps to reproduce the behavior:
- Go to Landfill and salvage
- Enter "0" to the salvage% field
- Or even if you enter a different value greater than 0% in salvage % and then later change salvage % to 0 then the calculation does not change.
Expected behavior
This should not be the case. Even if the user enters salvage % as 0%, the landfill % should be displayed as 100% and the calculation should proceed as normal to display the other field values.
Is it possible for all landfill entries to have the landfill % as 100% and salvage % as 0% by default. The user can then change these percentages if required and the calculation can be carried out.
Screenshots
https://drive.google.com/file/d/1n9fjSg6pEYrPhmKvqi2VhlYCbur4h2fq/view?usp=drive_web
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
black results headings
Describe the bug
The results headings should be black.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Order of topics in bar charts and table
Describe the bug
Order of results displayed in bar chart should be the same order as in which the results were input (eg - for earthwotks; Order of bars in barchart should be Site clearance, Soil excavation, Rock excavation and backfilling). Same case for the table.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Superscripts
Describe the bug
All superscripts in text are too small. If possible increase size for visibility.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Operation phase and demolition phase results title
Describe the bug
In both phases and sub phases the results title unit should be changed from ''CO2e '' to ''kgCO2-eq''
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Superstructure- Title changes
Describe the bug
Table view - Change ''CO2e'' to ''kgCO2-eq''
Also in the Table view title there should not be a gap between super and structure. Should be one word.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Search facility in drop down
Describe the bug
Can the search facility be more precise within the material dropdown.
https://drive.google.com/file/d/1PY_mB3SlscGw6Lu4xkQFcNA9gYK5eAPw/view?usp=drive_web
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Units
Describe the bug
The units that should be displayed next to entry topics such as Service life , Distance, Machine hours is not available.
To Reproduce
Steps to reproduce the behavior:
This issue is available in all entries under all topics.
Expected behavior
Show the required unit next to the name;
Service life (years)
Distance (km)
Machine hours (hrs)
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Building sat search
Describe the bug
When B-SAT is typed on google our tool does not appear. Only when Building SAT is typed the tool appears. In this case what can be the solution? If an updated logo is provided with altered name to Building SAT can this be added?
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
BSAT time out
Describe the bug
Possibility to automatically log the user out after 20 minutes of inactivity.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Background image addition
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Difficulty level - pop up message
Describe the bug
As of now, the same pop up message is being displayed for the difficulty levels in site clearance, soil excavation and rock excavation which is wrong.
Kindly refer to the document that was provided for pop up messages and correct them.
To Reproduce
Steps to reproduce the behavior:
Access current project > Hover over question mark next to difficulty level in site clearance, soil excavation and rock excavation.
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Updating entries in database
Describe the bug
When data is updated in the database using ''Manage resources'' option, the GWP is displayed as invalid data and has to be re-entered omitting the last zeroes.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Material dropdown order
Describe the bug
Is it possible to arrange the dropdown in alphabetical order. In case a new material category is added, is it possible that the dropdown is arranged in alphabetical order including the new material catgeory.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Landfill and salvage
Describe the bug
Materials types that should not be flagged to appear in the landfill and salvage section are also appearing in this section ( eg- adhesives and sealants were not flagged as landfill and salvage materials in the excel sheet provided)
To Reproduce
Steps to reproduce the behavior:
BSAT > Demolition phase > Landfill and salvage
Expected behavior
Only the materials marked in the excel sheet that we gave for landfill and salvage should be displayed in this section and allowed for the user to edit. Kindly refer to the excel sheet list we gave where we marked which types of materials should be flagged to appear in the landfill and salvage section.
Refer to excel sheet (FINALIZED B-SAT DATABASE FOR POPULATION - i will email you again for convenience)
Screenshots
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
UNITS AND DISPLAY MESSAGES
Describe the bug
There is a considerable number of these issues. Therefore instead of entering a lot of github entries, I have made a word document with all the unit requirements and messages under each topic. Kindly refer to the document.
Final comments.docx
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Earthworks- results labelling
Describe the bug
Table view - Labels should not be CO2 eq but it should be kgCO2-eq (applicable for all columns)
Chart view - Label should be changed from "Global warming potential of earthwork site operations'' to ''Global Warming potential of Earthwork Activities''
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
decimal places
Describe the bug
is it possible to adjust all values such that all values display 8 decimal places after the decimal point. Else it looks inconsistent.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Chart issue
Describe the bug
When hovering over the parts of the bar chart, the required messages do not appear
To Reproduce
Construction phase> Results>Chart view
Expected behavior
When the user hovers over the bar chart, values pertaining to each section should appear
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Add material category column to the manage materials section
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
overseas transport
Describe the bug
Although the overseas distance and vehicle are not indicated as mandatory anymore, the user cannot proceed without filling these values. The tool does not allow the user to save and proceed unless the overseas distance and vehicle are filled.
To Reproduce
Construction phase > Substructure > Add new material > Overseas distance
Expected behavior
Allow the user to omit the entry of overseas distance and vehicle information if needed
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Earthworks - Total distance issue
Describe the bug
Applicable to Earthworks section.
As of now, the Total distance is displayed for the user.
Is it possible that the Total Distance can be changed to "Distance" and the value that is displayed in this field would be the one way distance retrieved from the distance database. No changes happens to the calculations or the kg CO2 eq value displayed.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
X axis of results not labelled in all subphases
Describe the bug
The x axis of results in all subphases should be labelled as sub- activities. Refer to screenshot.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Message editing displayed in login page and dashboard
Describe the bug
The messages in login page and dashboard should be edited as shown in attached document.
B-SAT message.docx
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Earthworks - distance
Describe the bug
Allow the user to edit the distance if required. This functionality is available everywhere else, except earthworks. Kindly make it possible for earthworks too.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Deleting an entry in manage materials - warning sign
Describe the bug
In the manage materials section, display a warning message asking if the user is sure to delete the entries chosen.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Construction site operations - Results headings
Describe the bug
Table titles should change from CO2e to kgCO2-eq
To Reproduce
Steps to reproduce the behavior:
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Results generation
Is your feature request related to a problem? Please describe.
Added here just for follow up. Will discuss during meeting.
Describe the solution you'd like
A clear and concise description of what you want to happen.
Describe alternatives you've considered
A clear and concise description of any alternative solutions or features you've considered.
Additional context
Add any other context or screenshots about the feature request here.
Units and messages to be displayed
Describe the bug
Kindly refer to the word document .
Final comments.docx
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
CALCULATION FUNCTIONING ERROR IN PROJECT SUMMARY
Describe the bug
In project summary, the kgCO2 -eq/m2/year value calculated and displayed is incorrect.
The equation provided for this calculation in the document was -
(Total kgCO2-eq / gross floor area (m2) which is extracted from general information of project/ service life of building 9obtained from general information entered by user when creating project)
According to this calculation the results that should be displayed on this should be 1.004119664 (screenchot)
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Units
Describe the bug
I understand this is no blocker, but will enter as an issue to follow up on due time.
Missing unit -
EARTHWORKS
Total distance units missing – km
Order in which results are displayed is incorrect. Units should be kg – CO2 eq
SUBSTRUCTURE/ SUPERSTRUCTURE/ INTERNAL AND EXTERNAL FINISHES
RL –Resource Location
Mortar – Area units (m2) / Thickness (m) / RL – Resource Location/ Distance (km)/Service life (years)/ wastage (%)
OPERATION PHASE
Energy consumption units – kWh / Fuel used (L) / Exported energy units
DEMOLITION PHASE
Units missing –Electricity used/ Fuel used
To Reproduce
B-SAT project
Expected behavior
Units should be available
for user
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Substructure
*Describe the bug.
Table view - The label should be changed from'' CO2 e'' to ''kgCO2-eq'' in all columns
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Replacing ''B-SAT'' with ''Building-SAT''
Describe the bug
Replace B-SAT with Building-SAT
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Top tab section
Describe the bug
Help section appearance
appearance (1).pdf
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
UNITS DISPLAY MESSAGES
Describe the bug
Kindly refer to attached document for the required units and messages to be displayed in the UI.
Final comments.docx
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
No. of projects
Describe the bug
No. of projects should be limited to 10 projects as discussed during meetings. As of now the limit is 25. Worried if this could limit the number of users.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Pop up message when 10 projects have reached
Describe the bug
Edit the message displayed when 10 projects have been reached.
Display the following message.
"Only a maximum of 10 projects allowed. To add a new project, delete an old project and add new project''
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Pie chart- percentage display
Describe the bug
Ability to display % on pie chart
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Downloading of results
Describe the bug
Allow users to download their results (tables and figures) if required in the next stage.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Title change in results
Describe the bug
The title of the graph should be changed to just ''Earthworks''
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Image displayed on right top corner in all phases
Describe the bug
Can an image be displayed on the right hand top corner in all phase pages where data is entered. Refer to screenshot.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Removal of writeup on dashboard
Describe the bug
remove writeup on tool on dashboard.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Results charts display issue
Substructure.-.Google.Chrome.2021-10-24.12-27-19.mp4
Describe the bug
When hovering over the stacked bar chart in substructure, the tags that should appear when placing the cursor one each of the different colored portions does not appear (screenrecording attached )
To Reproduce
Steps to reproduce the behavior:
BSAT > Construction phase > Substructure > Results> Chart view > hover over chart sections
Expected behavior
When the user hovers over the different sections of the stacked bar chart, tags showing the contribution of CO2e by machinery/ transportation/ material should be displayed to the user.
Screenshots
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Energy and water columns in results table - Construction phase
Describe the bug
Add energy and water kgCO2 eq columns for all construction phase sub activity results.
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Overseas transport details entry
Describe the bug
Overseas transport details - Distance (overseas) field and Vehicle (overseas) field are displayed as mandatory fields to be filled. The user cannot proceed with the data entry if they do not complete these fields. Overseas transport details - Distance (overseas) field and Vehicle (overseas) field SHOULD NOT be marked as mandatory. These are only optional fields to be filled by the user if imported materials are used. This issue is present in Substructure, Superstructure, Internal and external finishes and so on.
To Reproduce
Steps to reproduce the behavior:
Open B-SAT > Substructure/ Superstructure (Main phases) > Sub phases ( Walls and facades etc)
Expected behavior
When users make a material entry under all main phases and sub phases only the local transport detail entry (Local distance/ Local vehicle) should be mandatory and compulsory to be filled. Overseas transport components ( Overseas distance/ Overseas vehicle) should not be mandatory fields to be filled. The user should be able to leave these two fields blanks ( Overseas distance, Overseas vehicle), save the project and proceed.
Desktop (please complete the following information):
- OS: [Microsoft Windows]
- Browser [Chrome]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Landfill and salvage - ISSUE 2
Describe the bug
Landfill and salvage calculation functions according to equations and tallies with the manual calculations. However, if the user goes back and changes the quantity of a certain material and saves it , the landfill and salvage material entry remains unchanged. The user HAS to come back and reenter or readjust the salvage % for the calculation to be rerun automatically.
To Reproduce
Steps to reproduce the behavior:
- Go to Landfill and salvage
- Fill in the entry
- Go back to the original entry where the quantity of the material was entered in the construction phase and change the quantity of the material
- Return back to Landfill and salvage and notice that the values remain unchanged. Only when the user re enters the salvage% the calculation is rerun and values are adjusted.
Expected behavior
This should not be the case. If the user decides to go back and change a material quantity, then the landfill and salvage quantity entry for that material entry should be modified accordingly by re - running the backend calculations for that entry again.
Suggested solution- If the user decides to go back and change the quantity of the material, then in the landfill and salvage section, return that respective entry to the unfilled stage. So, intuitively the user will reenter the salvage % and the calculations will be rerun.
Screenshots
https://drive.google.com/file/d/1JgdvYakNCO8qOHzsYnNu-c8ptxHBcgnM/view?usp=drive_web
Desktop (please complete the following information):
- OS: [e.g. iOS]
- Browser [e.g. chrome, safari]
- Version [e.g. 22]
Smartphone (please complete the following information):
- Device: [e.g. iPhone6]
- OS: [e.g. iOS8.1]
- Browser [e.g. stock browser, safari]
- Version [e.g. 22]
Additional context
Add any other context about the problem here.
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.