Comments (11)
Ironically I just read that the Arduino Uno comes pre-loaded with StandardFirmata 2.2 ... except I didn't know that when I overwrote it to make an led blink... :)
from johnny-five.
I just followed the setup with a board from "reset" and it's working ok... probably a pain in the ass, but maybe start from scratch? Let me know how it goes :)
from johnny-five.
Yeah, I did do a full start from scratch a few times to no avail.
What version of IDE do you have?
Sent from my iPhone
On 17 Sep 2012, at 02:25, Rick Waldron [email protected] wrote:
I just followed the setup with a board from "reset" and it's working ok... probably a pain in the ass, but maybe start from scratch? Let me know how it goes :)
—
Reply to this email directly or view it on GitHub.
from johnny-five.
I use the 1.0 IDE with Firmata 2.2
from johnny-five.
Okay, tried again and recorded a screencast - http://www.youtube.com/watch?v=e2InaFMWgy8 - bottom line: no worky for me. I'm pretty sure that there's a link to the fact you set up on a "reset" state and mine had already been changed.
So if I use my default Arduino IDE 1.0.1 and Firmata 2.3 - any ideas of what I might need to do to get it working with Johnny Five?
from johnny-five.
Sorry, I lost track of all the file moving you were doing and even at full screen it's hard to see what is what :(
Just delete all the things related to Arduino IDE of all versions and use just IDE 1.0 with Firmata 2.2
Arduino 1.0.1 with Firmata 2.3 doesn't work, not sure why. I can't test anything right now because all of my gear is in New York and I'm in Boston. I feel bad about this because it seems like your having issues that no one else has had (the worst we had before was no connection after installing, which is what happens with 2.3)
If I have to I will go to Microcenter and buy a kit :)
from johnny-five.
If you need to, you can key in and grab my duino at bocoup
On Sep 18, 2012 6:11 PM, "Rick Waldron" [email protected] wrote:
Sorry, I lost track of all the file moving you were doing and even at full
screen it's hard to see what is what :(Just delete all the things related to Arduino IDE of all versions and use
just IDE 1.0 with Firmata 2.2Arduino 1.0.1 with Firmata 2.3 doesn't work, not sure why. I can't test
anything right now because all of my gear is in New York and I'm in Boston.
I feel bad about this because it seems like your having issues that no one
else has had (the worst we had before was no connection after installing,
which is what happens with 2.3)If I have to I will go to Microcenter and buy a kit :)
—
Reply to this email directly or view it on GitHubhttps://github.com//issues/75#issuecomment-8672597.
from johnny-five.
Note that this only applies to Mac - I've not tested this on linux or windows - equally, I can't confirm the problem is on linux or windows either.
Right, I've fixed it. I'm certain the documentation is out of date though. If you do a fresh download of Arduino IDE 1.0 (the link you provide in the README) you shouldn't be able to compile the StandardFirmata 2.2 example (because Arduino IDE 1.0 renames WProgram.h to Arduino.h and some of the API changes). This is after you've swapped out Firmata 2.3 with 2.2 in the Resources folder of the app of course.
Downloading (what I can only assume is) the very last release before 1.0: version 0023 then I'm able to open the StandardFirmata example and it's able to verify the code (which of them means I can deploy it to the board). 0023 also comes with Firmata 2.2 so there's no need to swap it out anyway.
Obviously I'm not keen on running an older IDE, but really I just need it to deploy the software that Johnny Five needs to hook in to - so as a work around, I'm happy.
from johnny-five.
@remy I can't tell you how much of a relief this is and how excited I am to have your attention on the project.
As soon as I'm finished with travelling I want to address the IDE/Firmware issue and kill the bug for good
from johnny-five.
Can we use latest IDE and firmata with Johnny Five ? The documentation still states 2.2. Let me know if I missed some doc.
from johnny-five.
@sreekarun there used to be issues, but that is no longer the case. I've updated the readme—Thanks!!
from johnny-five.
Related Issues (20)
- Using PWM and AC DImmer RobotDyn
- Cannot Input Mode Pin 12, 14, 15. ESP8266 HOT 4
- Refactor DS18B20 Temperature Conversion Time Handling
- Usage with Electron of latest J5 versions? HOT 6
- Status of Release?
- Using a Coin selector
- CAN bus with mcp2515 support, and other libraries
- MKR 1010 board HOT 1
- INPUT_PULLUP on digital input pin HOT 12
- I2C Scanner?
- Input pull-up doesn't work on expanders HOT 3
- Unable to use Led.Digits with Multple Boards HOT 4
- Stop stepper while running HOT 2
- Servo animation enqueue is buggy HOT 6
- Calling animation.next inside onloop callback is not working.
- Sensor disable only works once. HOT 3
- Is there a way to use multiple I2C LCD's HOT 2
- RaspberryPi issue HOT 3
- Intermittent Error Code 31 in GetOverlappedResult
- Arduino Mega Link Bork'd HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from johnny-five.