robotsrulz / mks-tft Goto Github PK

I found DuePanel 3 weeks ago but it's based on expensive Atmel and firmware quality is not good.
Then I thought what if I rewrite the firmware to STM32 and improve it. A week ago I found your firmware for MKS-TFT32 and now I explore and rewrite it. I've already fixed several bugs successfully.

And I can't find info about UTouch configuration.
There is a method UTouch::getTouchData which requires definition of ILI9325 or ILI9328 or SSD1963_50 or SSD1963_70.

Which one should I define?
And what header file should I use for such definition?

Do you have build/deploy instructions somewhere? I couldn't find them.
Do you use the same boot loader as MKS (or some way to return to the original firmware)?

(Sorry for asking this in an 'issue' but I wasn't sure how else to contact you. Very interested in the project!)

could it be possible to set up the mks config with 4 extruders?. I'm running a kraken.

Are all commands and feedback still G, M, and T codes?

Hi, I am thinking about buying an MKS Robin but using and closed source software isn't an option. Can you provide what is working and what not? Is that firmware written from scratch or did it use as base some other firmware? Like Marlin, smoothieware?

Building and flashing works like a charme but i'm not sure how to connect to DuetWifi and what needs to mapped in the Firmware?

I've seen from the Picture that +5V and GND seems still connected to the AUX1 - Port of MKS-TFT32 and to the Duet Wifi.

Additional where to connect SWDIO and SWCLK? Are these the correspinding Pinks UTXD0 and RTXD0 on the PanelDUE-Connector on DuetWifi?

Thanks in advance
MoS-tekknix