GassistPi -- Google Assistant for Single Board Computers

If you like the work, find it useful and if you would like to get me a ☕ 😄

Community: For Non-Issue Help and Interaction

23-Dec-2018 Update:

Updated the project to the latest SDK version.

Features (All features are applicable to all boards, unless and otherwise mentioned):

1. Headless auto start on boot.
2. Voice control of GPIOs without IFTTT, api.ai, Actions SDK (Only for Raspberry Pi Boards).
3. Voice control of NodeMCU without IFTTT and MQTT.
4. Radio streaming.
5. Voice control of servo connected to RPi GPIO (Only for Raspberry Pi Boards).
6. Safe shutdown RPi using voice command.
7. Stream Music from YouTube.
8. Indicator lights for assistant listening and speaking events.
9. Startup audio and audio feedback for wakeword detection.
10. Pushbutton service to stop Music or Radio playback.
11. Parcel tracking using Aftership API.
12. RSS Feed streaming.
13. Control of Kodi or Kodi Integration.
14. Streaming music from Google Play Music.
15. Casting of YouTube Videos to Chromecast and Chromecast media control by voice.
16. Voice control of Radio/YouTube/Google Music volume levels.
17. Control Sonoff Tasmota Devices/Emulated Wemo.
18. Track Kickstarter campaigns.
19. Emulated Philips Hue HUB service and control of Emulated Hue Lights.
20. Search recipes and get push message of ingredients and link to recipe.
21. Remote control of Magic Mirror.
22. Sending voice messages from the phone to the raspberry.
23. Play your Spotify playlist.
24. Custom wakeword activation for all Pi boards.
25. Mute microphones to prevent listening to Ok-Google hotword (Only Raspberry Pi Boards).
26. Create custom conversations.
27. Control of lights added to Domoticz.
28. Stream music from Gaana.com.
29. Stream your playlist from Deezer.
30. Custom actions in French, Italian, German, Dutch and Spanish.

Only OSes suported are:

• Armbian Stretch
• Raspbian Stretch

Raspberry Pi users please use the latest Raspbian Desktop/Lite image- Link. Other board users please use the lastest Armbian image- Link

NOTE: "${USER}" will automatically take your username. No need to change that. Just copy pasting the following commands on terminal will work.

FIRST STEP- CLONE the PROJECT on to Pi

1. Open the terminal and execute the following

sudo apt-get install git  
git clone https://github.com/shivasiddharth/GassistPi    

INSTALL AUDIO CONFIG FILES

1. Update OS

sudo apt-get update

2. Restart Pi and change directory

cd /home/${USER}/   

3. Choose the audio configuration according to your setup.
   Non-Raspberry Pi users, choose the USB-DAC option.
   The speaker-test command is used to initialize alsa, so please do not skip that.
   AIY-HAT and CUSTOM-HAT users, please reboot the Pi at places mentioned, else it will lead to audio and taskbar issues.

3.1. USB DAC or USB Sound CARD users,

sudo chmod +x ./GassistPi/audio-drivers/USB-DAC/scripts/install-usb-dac.sh  
sudo ./GassistPi/audio-drivers/USB-DAC/scripts/install-usb-dac.sh
speaker-test  

3.2. AIY-HAT users,

sudo chmod +x ./GassistPi/audio-drivers/AIY-HAT/scripts/configure-driver.sh  
sudo ./GassistPi/audio-drivers/AIY-HAT/scripts/configure-driver.sh  
sudo reboot  
cd /home/${USER}/  
sudo chmod +x ./GassistPi/audio-drivers/AIY-HAT/scripts/install-alsa-config.sh  
sudo ./GassistPi/audio-drivers/AIY-HAT/scripts/install-alsa-config.sh  
speaker-test  

3.3. USB MIC AND HDMI users,

sudo chmod +x ./GassistPi/audio-drivers/USB-MIC-HDMI/scripts/configure.sh  
sudo ./GassistPi/audio-drivers/USB-MIC-HDMI/scripts/configure.sh  
sudo reboot  
cd /home/${USER}/  
sudo chmod +x ./GassistPi/audio-drivers/USB-MIC-HDMI/scripts/install-usb-mic-hdmi.sh  
sudo ./GassistPi/audio-drivers/USB-MIC-HDMI/scripts/install-usb-mic-hdmi.sh  
speaker-test  

3.4. USB MIC AND AUDIO JACK users,

sudo chmod +x ./GassistPi/audio-drivers/USB-MIC-JACK/scripts/usb-mic-onboard-jack.sh  
sudo ./GassistPi/audio-drivers/USB-MIC-JACK/scripts/usb-mic-onboard-jack.sh  
speaker-test  

3.5. CUSTOM VOICE HAT users,

sudo chmod +x ./GassistPi/audio-drivers/CUSTOM-VOICE-HAT/scripts/install-i2s.sh  
sudo ./GassistPi/audio-drivers/CUSTOM-VOICE-HAT/scripts/install-i2s.sh
sudo reboot  
cd /home/${USER}/  
sudo chmod +x ./GassistPi/audio-drivers/CUSTOM-VOICE-HAT/scripts/custom-voice-hat.sh  
sudo ./GassistPi/audio-drivers/CUSTOM-VOICE-HAT/scripts/custom-voice-hat.sh  
speaker-test   

3.6. RESPEAKER HAT users,

git clone https://github.com/shivasiddharth/seeed-voicecard
cd ./seeed-voicecard/  
sudo ./install.sh  
sudo reboot   
speaker-test     

Those using any other DACs or HATs install the cards as per the manufacturer's guide and then you can try using the USB-DAC config file after changing the hardware ids

4. Restart Pi

5. Check the speaker using the following command

speaker-test -t wav  

CONTINUE after SETTING UP AUDIO

1. Follow the instructions here to Configure a Developer Project and Account Settings. Then follow this guide to register the device and obtain the credentials.json file. Refer to the video below for step by step guidelines.

2. Place the credentials.json file in/home/${USER}/ directory DO NOT RENAME

3. Use the one-line installer for installing Google Assistant

3.1 Change directory

cd /home/${USER}/      

3.2 Make the installer Executable

sudo chmod +x ./GassistPi/scripts/gassist-installer.sh

3.3 Execute the installer. When Prompted, enter your Google Cloud console Project-Id, A name for your Assistant and the Full Name of your credentials file, including the json extension.

sudo  ./GassistPi/scripts/gassist-installer.sh   

4. Copy the google assistant authentication link from terminal and authorize using your google account

5. Copy the authorization code from browser onto the terminal and press enter

6. After successful authentication, the Google Assistant Demo test will automatically start. At the start, the volume might be low, the assistant volume is independent of the Pi volume, so increase the volume by using "Hey Google, Set volume to maximum" command.

7. After verifying the working of assistant, close and exit the terminal

HEADLESS AUTOSTART on BOOT SERVICE SETUP

1. Open the service files in the /GassistPi/systemd/ directory and verify your project and model ids and save the file.

2. Change directory

cd /home/${USER}   

3. Make the service installer executable

sudo chmod +x ./GassistPi/scripts/service-installer.sh  

4. Run the service installer

sudo ./GassistPi/scripts/service-installer.sh    

5. Enable the service

sudo systemctl enable gassistpi.service  

6. Start the service

sudo systemctl start gassistpi.service  

RESTART and ENJOY

MANUALLY START THE ASSISTANT

At any point of time, if you wish to manually start the assistant:

Ok-Google Hotword/Pi3/Pi2/Armv7 users
Open a terminal and execute the following:

/home/${USER}/env/bin/python -u /home/${USER}/GassistPi/src/main.py --device_model_id 'replace this with the model id'

Pushbutton/Pi Zero/Pi B+ and other users
Open a terminal and execute the following:

/home/${USER}/env/bin/python -u /home/${USER}/GassistPi/src/pushbutton.py --project-id 'replace this with your project id'  --device-model-id 'replace this with the model id'

Insert your Project Id and Model Id in quotes in the mentioned places

USING THE CUSTOMIZATIONS

TOGGLING MAJOR CUSTOM ACTIONS ON or OFF

Major custom actions have been provided with a control key or switch in the config.yaml.
Set it to "Enabled" to enable the custom actions and set it to "Disabled" to disable them.

CUSTOM ACTIONS IN Non-English LANGUAGES

Languages supported: French, Italian, Spanish, Dutch, German and Swedish.

In the config.yaml file, under the Languages and Choice option set your desired language.

Use the Translated versions of the English syntaxes given for all the custom actions.

MUSIC STREAMING FROM DEEZER

NOTE: As a roundabout approach, I have programmed the assistant to get the playlist details using Deezer API and then fetch those tracks from YouTube.
This feature uses a YouTube Data API v3.

Adding YouTube Data API and Generating API Key

1. Go to the projects page on your Google Cloud Console-> https://console.cloud.google.com/project
2. Select your project from the list.
3. On the left top corner, click on the hamburger icon or three horizontal stacked lines.
4. Move your mouse pointer over "API and services" and choose "credentials".
5. Click on create credentials and select API Key and choose close. Make a note of the created API Key and enter it in the config.yaml script at the indicated location.
6. "From the API and services" option, select library and in the search bar type youtube, select "YouTube Data API v3" API and click on "ENABLE".
7. In the API window, click on "All API Credentials" and in the drop down, make sure to have a tick (check mark) against the API Key that you just generated.
8. Add your Deezer user number in the config.yaml under the "Deezer" and "User_id".

Note: The same API key can be used for Kickstarter, YouTube and Gaana feature.

Syntax:

1. To play the playlists added to your Deezer account:
   Hey Google, Play playlist playlist-number from Deezer
   Example: Hey Google, Play playlist 1 from Deezer

MUSIC STREAMING FROM GAANA.COM

NOTE: As a roundabout approach, I have programmed the assistant to get the playlist details using web requests and then fetch those tracks from YouTube.
This feature uses a custom search engine as well as YouTube Data API v3.

Adding Google Custom Search Engine API, YouTube Data API and Generating API Key

1. Go to the projects page on your Google Cloud Console-> https://console.cloud.google.com/project
2. Select your project from the list.
3. On the left top corner, click on the hamburger icon or three horizontal stacked lines.
4. Move your mouse pointer over "API and services" and choose "credentials".
5. Click on create credentials and select API Key and choose close. Make a note of the created API Key and enter it in the config.yaml script at the indicated location.
6. "From the API and services" option, select library and in the search bar type search, select "Custom Search API" and click on "ENABLE".
7. "From the API and services" option, select library and in the search bar type youtube, select "YouTube Data API v3" API and click on "ENABLE".
8. In the API window, click on "All API Credentials" and in the drop down, make sure to have a tick (check mark) against the API Key that you just generated.

Note: The same API key can be used for Kickstarter and YouTube feature.

Syntaxes:
Note - It is necessary to Say the full "Gaana.com", otherwise the assistant will pick it up as Ghana (a country).

1. To play the playlists added in config.yaml file:
   Hey Google, Play playlist playlist-number from Gaana.com
   Example: Hey Google, Play playlist 1 from Gaana.com

2. To play other playlists:
   Hey Google, Play user-playlist-query from Gaana.com

DOMOTICZ CONTROL

As of today, you can control lights and switches only, more controls will be added in the future.

1. If you want to control devices with Domoticz, in the config.yaml file under "Domoticz:" change "Domoticz_Control:" from "Disabled" to "Enabled".
2. List the device names and the ids that you want to control in the config.yaml file. The names should be the same as the ones in the domoticz server.
3. Syntaxes:
   To On/Off/Toggle (The light name should be the same as the Hardware name in Domoticz):
   Hey Google, Turn On/Turn Off/Toggle Name of your light .
   To Change Brightness (between 0 and 100):
   Hey Google, Set Name of your light brightness to desired value .
   To Change Colour (refer the list of available colors given below): Hey Google, Set Name of your light color to desired color .
   Hey Google, Change Name of your light to desired color .

CUSTOM CONVERSATIONS

1. Customize the assistant's reply to a specific question.
2. Add the list of questions and answers in config.yaml under the Conversation: option.
3. There must be only one question, but corresponding answers can be as many.
4. Sample questions and answers has been provided, please follow the same pattern.

CUSTOM WAKEWORD ACTIVATION

1. You can choose to either Enable or Disable the custom wakeword activation in the config.yaml file.
2. In the config.yaml file, under Wakewords, change the "Custom_Wakeword" to 'Enabled' if you want to use the custom wakeword or set it to 'Disabled' if you dont want to use the custom wakeword option.
3. For changes to take effect, you need to restart the assistant. Changing status while an instance of assistant is already running will not cause any change.
4. Create your custom snowboy model here. Add the models to /GassistPi/src/resources directory.
5. Change the paths to the models in the config.yaml file.
6. To disable the default "Ok Google" hotword, set the Ok_Google option to "Disabled".
7. Users using pushbutton.py or Pi Zero users have an option between using custom wakeword and GPIO trigerring. If custom wakeword is enabled, then GPIO trigger will not work. To enable GPIO triggering, set custom wakeword to 'Disabled'.

PLAYING SPOTIFY PLAYLIST

NOTE: Spotify API currently only supports playback in a web browser, but DRM content is being blocked in the Raspberry Pi. As a roundabout approach, I have programmed the assistant to get the playlist details using Spotipy API and then fetch those tracks from YouTube. This custom program has a better accuracy than spotify playlist playback using mpsyt.

1. Click here and register for a spotify developer account, if you already don't have one.
2. In the developer's dashboard, choose "CREATE A CLIENT ID". In the pop-up window provide the requested details.
3. Click on the new app created and copy the CLIENT ID and CLIENT SECRET. Paste it in the config.yaml file in the indicated space.
4. Access spotify:here and copy the username to be entered in config.yaml

Syntax: Hey Google, Play Your Spotify Playlist Name from Spotify

TRACKING KICKSTARTER CAMPAIGNS

A custom Google search engine for Kickstarter has been used. This requires an API to be added to your existing project.

Adding Google Custom Search Engine API and Generating API Key

1. Go to the projects page on your Google Cloud Console-> https://console.cloud.google.com/project
2. Select your project from the list.
3. On the left top corner, click on the hamburger icon or three horizontal stacked lines.
4. Move your mouse pointer over "API and services" and choose "credentials".
5. Click on create credentials and select API Key and choose close. Make a note of the created API Key and enter it in the config.yaml script at the indicated location.
6. "From the API and services" option, select library and in the search bar type search, select "Custom Search API" and click on "ENABLE".
7. In the API window, click on "All API Credentials" and in the drop down, make sure to have a tick (check mark) against the API Key that you just generated.

Note: The same API key can be used for YouTube and Gaana, but YouTube Data v3 API must be added to the project in the cloud console.

Syntax: Hey Google, (What is the status of) or (Track) Your Desired Campaign Name Kickstarter campaign

EMULATED PHILIPS HUE SEVICE AND CONTROL

Credits for the Emulated Hue to Marius Motea.

Follow the guidelines given in the diyHue's Wiki to setup the Emulated Hue Service.

Download sketches for your NodeMCU/Wemos/ESP Devices from here

After making suitable modifications and uploading the sketches to your device, open the device's webgui by entering the ip address in a browser. In that change the "Startup" value from "Last State" to "Off" as shown below.

|

Depending upon your device, download the Philips Hue App for either of the platforms from the following links.

To pair the diyHue to the app:

To pair a new device to diyHue, first head to http://{IP_ADDRESS}/hue/linkbutton.
The default username is Hue and password is Hue.
At this point you should open the Hue app on your phone and start searching for hubs.
To speed this up you can click the Help button and then enter the IP address of your diyHue device.
Once the bridge has been detected, click the green Set up button. At this point, the app will prompt you to press the link button on your Hue bridge.
To do so, click the Activate button on the web page you loaded at the start. The Hue app should now prompt you through the rest of the setup. For specific details on how to setup specific lights, browse the lights section in the navigation bar to the right.

Command Syntax:
To turn lights on/off : "Hey Google, Turn Hue-Light-Name On/Off"  
To change light colour: "Hey Google, Change Hue-Light-Name colour to Required-Colour" (List of available colours is given at the end of readme doc)
To change brightness : "Hey Google, Change Hue-Light-Name brightness to Required-Brightness-Level"

PUSHING MESSAGES/INFO FROM ASSISTANT ON Pi TO ANDROID DEVICE

For pushing messages/info, the GassistPi uses pushbullet python package. To use this feature:

1. Download and install pushbullet app on your tablet/mobile device.
2. Visit www.pushbullet.com register for new account or sign in with your existing account.
3. Choose Settings-->Account and then choose "Create access token".
4. Copy this token and paste in the actions.py script under the pushmessage function.

GETTING RECIPE DETAILS USING ASSISTANT

GassistPi uses Edamam for getting recipe details/info. To use this feature:

1. Click here to visit the developers' porta for Edamam.
2. Signup as a developer/login with your existing account.
3. In the Menubar at the top, Click on Dashboard-->Applications-->Create a new applicatiuon-->Recipe Search API and then create a new application.
4. Copy the application id and application key and paste it in the actions.py script under the getrecipe function.
   **(Note: While copying the application key, do not copy the "—")

Command Syntax:
"Hey Google, Get ingredients for Required-Item"

CONTROLLING MAGIC MIRROR BY VOICE

You can control either Magic Mirror running on another Pi or Magic Mirror running on the same pi as GassistPi.
As a prerequisite, you should have the remote control module installed in the Pi running Magic Mirror.
Enter the Ip address of Pi running Magic Mirror in the config.yaml against the variable "mmmip" declared.

Command Syntax:
To show/hide weather module : "Hey Google, Show/Hide Weather on Magic Mirror"
To turn magic mirror display on/off : "Hey Google, Turn Magic Mirror display on/off"
To power off/reboot/restart Magic Mirror: "Hey Google, Power off/Reboot/Restart Magic Mirror"

INDICATORS FOR GOOGLE ASSISTANT'S LISTENING AND SPEAKING EVENTS

Connect LEDs with colours of your choice to GPIO05 for Listening and GPIO06 for Speaking Events.

PUSHBUTTON TO STOP MUSIC/RADIO PLAYBACK AND MUTE MICROPHONE

Connect a pushbutton between GPIO23 and Ground. Single press mutes microphone and double press stops music streaming.

VOICE CONTROL OF GPIOs, SERVO and Pi SHUTDOWN

The default GPIO and shutdown trigger word is trigger. It should be used for controlling the GPIOs, servo and for safe shutdown of Pi.

It has been intentionally included to prevent control actions due to false positive commands. If you wish to change the trigger word, you can replace the 'trigger'in the main.py code with your desired trigger word.

The default keyword for servo motor is servo. For example, the command trigger servo 90 will rotate the servo by 90 degrees.

If you wish to change the keyword, you can replace the 'servo' in the action.py script with your desired keyword for the motor.

For safe shutdown of the pi, command is: trigger shutdown

You can define your own custom actions in the actions.py script.
THE ACTIONS SCRIPT OF THIS PROJECT IS DIFFERENT FROM AIY KIT's SCRIPT, COPY PASTING THE COMMANDS FROM AIY's ACTION SCRIPT WILL NOT WORK HERE. FOR A BETTER UNDERSTANDING OF THE ACTIONS FILE, FOLLOW THE FOLLOWING YOUTUBE VIDEO.

VOICE CONTROL OF NodeMCU

There are two ways to control NodeMCU:

1. Control of NodeMCU running a webserver.
2. Control of NodeMCU running Sonoff-Tasmota Firmware.

Controlling NodeMCU running webserver

Download the Arduino IDE code for Nodemcu from here: https://github.com/shivasiddharth/iotwemos/blob/master/Google-Home-NodeMCU.ino

Add the wifi credentials, make the desired changes and upload the Arduino code onto the NodeMCU and get the IP address from the serial monitor.

Add the NodeMCU's IP address in the config.yaml.

Syntax: "Hey Google, Trigger Turn Devicename On/Off"

FOR GUIDELINES ON MODIFYING THE ARDUINO CODE AND ACTIONS.PY FILE, FOLLOW THE FOLLOWING YOUTUBE VIDEO.

Controlling NodeMCU running Sonoff-Tasmota firmware

Download the Tasmota firmware from this link

Follow the instructions in this video to upload the firmware properly.

Pi3 and Pi Zero users, assign the device names and device ip addresses in the config.yaml in the marked locations.

Syntax: "Hey Google, Turn Devicename On/Off"

Advantage of using Sonoff-Tasmota over webserver is that, with Sonoff-Tasmota you can emulate a Wemo switch and control the NodeMCU using Amazon Alexa (Echo Devices) in addition to the GassistPi.

CASTING YouTube VIDEOS TO Chromecast

Default command for casting YouTube videos is Play Desired Video on Chromecast, with Chromecast as the trigger word. Example: Hey Google, Play MasterChef Season 1 Episode 1 on Chromecast casts the MasterChef YouTube Video.

Note: YouTube casting to Chromecast using third party scripts has been blocked, so I have taken a roundabout approach and as a result, you may not find the usual YouTube interface on Chromecast.

CONTROLLING Chromecast BY VOICE

First, add the IP-Address of your Chromecast in the actions.py script, in the indicated location.

Following are the default commands for controlling Chromecast with Chromecast as the trigger word.
Pausing:
Hey Google, Pause Chromecast

Resuming:
Hey Google, Resume Chromecast

Stopping: Hey Google, End Chromecast

Change volume up/down:
Hey Google, Chromecast Volume Up/Down

CCONTROLLING MEDIA BY VOICE

You can change volume and pause or resume the Radio/YouTube/Google Music by voice.
Pausing:
Hey Google, Pause Music (Entire phrase Pause Music is the trigger)

Resuming:
Hey Google, Resume Music (Entire phrase Resume Music is the trigger)

Volume Control (Music Volume is the trigger)

Increase/Decrease Volume:
Hey Google, Increase/(Decrease or Reduce) Music Volume by ( a number between 0 and 100)
If you do not specify a number, by default the volume will be increased or decreased by 10 units.

Set Volume:
Hey Google, Set/change Music Volume to ( a number between 0 and 100)

Set volume to Maximum/Minimum:
Hey Google, Set/change Music Volume to maximum/minimum

Change Tracks:
Play Previous Track:
Hey google, play previous
Hey google, play previous song
Hey google, play previous track

Play Next Track:
Hey google, play next
Hey google, play next song
Hey google, play next track

MUSIC STREAMING FROM YOUTUBE

The updated music streaming features autoplaying of YouTube suggestions. This makes use of the YouTube Data API v3.

Adding YouTube API and Generating API Key

1. Go to the projects page on your Google Cloud Console-> https://console.cloud.google.com/project
2. Select your project from the list.
3. On the left top corner, click on the hamburger icon or three horizontal stacked lines.
4. Move your mouse pointer over "API and services" and choose "credentials".
5. Click on create credentials and select API Key and choose close. Make a note of the created API Key and enter it in the config.yaml script at the indicated location.
6. "From the API and services" option, select library and in the search bar type youtube, select "YouTube Data API v3" API and click on "ENABLE".
7. In the API window, click on "All API Credentials" and in the drop down, make sure to have a tick (check mark) against the API Key that you just generated.

Note: The same API key can be used for Kickstarter Tracking and Gaana, but Custom Search API must be added to the project in the cloud console.

Music streaming has been enabled for both OK-Google and Custom hotwords/wakewords.

Due to the Pi Zero's limitations, users are advised to not use the Music streaming feature. Music streaming will send the CPU usage of Pi Zero into the orbit.

MUSIC STREAMING FROM Google Music

The music streaming from Google Music uses Gmusicapi.

Run the Google Music Authenticator once using:

/home/${USER}/env/bin/python -u /home/${USER}/GassistPi/src/gmusicauth.py

What you can do:

Play all your songs in loop using the syntax: "Hey Google, Play all the songs from Google Music"

Play songs added to the user created playlist (does not include: most played playlist, thumsup playlist, etc) using the syntax: "Hey Google, Play songs from the first playlist in Google Music" Playlists are sorted by date created, if you have multiple playlists, use a similar syntax replacing first with second, third etc. Also you need to make suitable changes in the main.py (It has been commented in the script to help)

Play songs by a particular artist using the syntax: "Hey Google, Play songs by artist YOUR_ARTIST_NAME from Google Music"

Play songs from particular album using the syntax: "Hey Google, Play songs from album YOUR_ALBUM_NAME from Google Music"

What you cannot do at the moment: (some features may be added later):

Change tracks Shuffle tracks Repeat tracks

Due to the Pi Zero's limitations, and computationally intensive nature of the Google Music streaming feature, this action has not been enabled for Pi Zero.

RADIO STREAMING

Default keyword for streaming radio is radio. For example, play Radio 2 or play Radio One command will open the corresponding radio stream listed in the actions.py file.

Radio streaming has been enabled for both OK-Google and Custom hotwords/wakewords.

Useful links for obtaining radio streaming links:
http://www.radiosure.com/stations/

http://www.live-radio.net/worldwide.shtml

http://worldradiomap.com/map/

Due to the Pi Zero's limitations, users are advised to not use the Radio streaming feature. Radio streaming will send the CPU usage of Pi Zero into next galaxy.

PARCEL TRACKING

The default keyword for tracking parcel is parcel. For example, you can say where is my parcel or track my parcel.

Regsiter for a free account with Aftership at https://www.aftership.com gnereate an API number and add parcels to the tracking list. The generated API number should be added to the actions.py at the indicated location. For a better understanding follow the attached youtube video.

RSS FEEDS STREAMING

Default keywords for playing RSS feeds is feed or news or quote. Example usage, top tech news will play the top technology news, top world news will play top news related to different countires, top sports news will play the top sports related news and quote of the day will give some quotes.

Do not mix the commands with Play as that has been associated with music streaming from YouTube.

numfeeds variable within the feed function in actions.py file is the feed limit. Certain RSS feeds can have upto 60 items and numfeeds variable limits the number of items to stream. The default value has been set to 10, which if you want can change.

KODI INTEGRATION

Enabling Kodi control

In the config.yaml, under kodi, change control option from 'Disabled' to 'Enabled'.

Adding YouTube API and Generating API Key

The Kodi integration uses YouTube Data API v3 for getting video links. First step is to add the API to the project and create an API KEY.

1. Go to the projects page on your Google Cloud Console-> https://console.cloud.google.com/project
2. Select your project from the list.
3. On the left top corner, click on the hamburger icon or three horizontal stacked lines.
4. Move your mouse pointer over "API and services" and choose "credentials".
5. Click on create credentials and select API Key and choose close. Make a note of the created API Key and enter it in the actions.py script at the indicated location.
6. "From the API and services" option, select library and in the search bar type youtube, select "YouTube Data API v3" API and click on "ENABLE".
7. In the API window, click on "All API Credentials" and in the drop down, make sure to have a tick (check mark) against the API Key that you just generated.

Enabling HTTP Control on Kodi

The webserver is disabled by default and has to be manually enabled by the user.

1. This can be done in Settings → Services → Control → Allow remote control via HTTP.
2. Set the port number to 8080, username to kodi and password to kodi
   (username and password should be in lowercase).

Adding YouTube plugin on Kodi

For Kodi to play the YouTube video, you need to add and enable the YouTube Plugin on Kodi.

Command Sytanxes for Kodi Control

Note that "on Kodi" should be used in all the commands. If you want to use it exclusively, for Kodi Control, replace the given main.py and assistants.py file with the ones provieded in the extras/Kodi Intergration/ folder. In that, "on kodi" has been programatically added and other functions have been disabled,even genral queries like time and weather will not work. It is to be used only for the following Kodi commands.

GOOGLE HOME LIKE NEOPIXEL INDICATOR FOR RASPBERRY PI BOARDS

1. Change the Pin numbers in the given sketch according to your board and upload it.

2. Follow the circuit diagram given.

LIST OF AVAILABLE LIGHT COLOURS

SENDING VOICE MESSAGES FROM PHONE TO GOOGLE ASSISTANT ON SBCs

1. https://support.google.com/googlehome/answer/7531913.

LIST OF GPIOs USED IN RASPBERRY PI BOARDS

Note: some HATS may use GPIOs 18, 19, 20, 21 for I2S audio please refer to the manufacturer's pinouts