The sole intent for this mod is to enable the students at University of South-eastern Noway to be able to run the Tutorial / Voltage glitching Example by NewAE Technology for more information and tutorials see https://github.com/newaetech for utdates :)

The examle could be runned using jupyter but requres some python libraries like: chipwhisperer , matplotlib ...

(My CW-Nano bought fall 2022 came width a FDN337N-Transistor and R12 = 20 Ohm ) - Adding a 5.6 Ohm resistor between GLITCH - MEASURE and opening Sj6 to grenerate aprox 600mV bias

:

Open the file jupiter\Voltage Glitching CWNano Mod.ipynb in jupiter

Download and install Thonny for all users
Download an unzip this github repo
Install all nessesary packages by running ./jupyter/thonny_jupiter_and_packages_install.bat
Start jupyter notebook by running ./jupyter/thonny_start_jupiter.bat
Open and run the example from "Voltage Glitching CWNano Mod Th.ipynb" or
"SOLN_Fault 2_2B - Voltage Glitching with CWNano to Bypass Password.ipynb" :)

These notebooks are distributed under the open-source GPL license (as is the rest of ChipWhisperer). This means you can distribute and modify this material (even for commercial trainings), provided you maintain references to this repository and the original authors, and also offer your derived material under the same conditions.

If you would like to re-use this content commercially under different license conditions, please contact sales -AT- newae.com. Note that as a public project, we also have user-contributed content which we may not own the original copyright for.

This material is Copyright (C) NewAE Technology Inc., 2015-2020. ChipWhisperer is a trademark of NewAE Technology Inc., claimed in all jurisdictions, and registered in at least the United States of America, European Union, and Peoples Republic of China.