ceph-dev's People
Forkers
a2batic zmc rafaelquint fossabot adk3798 mcoker sunilangadi2 aloksingh3112 aaryanporwal alfonsomthd aliakseimakarau nizamial09 adithyaakrishna shreyaswikriti xiaowenhao111 tomiisina singhavs kaxada ayushgadre mohitnehra26 hima7915 nsedrickm bryanmontalvan shanyutou gauravsitlani debjyoti-pandit cloudbehl afreen23ceph-dev's Issues
Ipv6 network error on setting up new ceph dev environment
Issue:
The following network error is generated when docker compose up
command is ran:
Attaching to ceph
ceph | npm ERR! code ERR_SOCKET_TIMEOUT
ceph | npm ERR! errno ERR_SOCKET_TIMEOUT
ceph | npm ERR! network request to https://registry.npmjs.org/zwitch/-/zwitch-1.0.5.tgz failed, reason: Socket timeout
ceph | npm ERR! network This is a problem related to network connectivity.
ceph | npm ERR! network In most cases you are behind a proxy or have bad network settings.
ceph | npm ERR! network
ceph | npm ERR! network If you are behind a proxy, please make sure that the
ceph | npm ERR! network 'proxy' config is set properly. See: 'npm help config'
ceph |
ceph | npm ERR! A complete log of this run can be found in: /root/.npm/_logs/2024-01-10T13_05_46_716Z-debug-0.log
Cause/Reason:
Doing a ping and curl from inside the container tells that its a problem associated with IPv6
[root@ceph ceph]# ping registry.npmjs.org
PING registry.npmjs.org(2606:4700:8393:80e2:e439:411:6810:23 (2606:4700:8393:80e2:e439:411:6810:23)) 56 data bytes
^C
--- registry.npmjs.org ping statistics ---
144 packets transmitted, 0 received, 100% packet loss, time 146459ms
The presence of IPv6 address 2404:6800:4009:825::200e, suggests that the network communication is being attempted over IPv6.
Also, the docker-compose.yaml is enabling use of ipv6:
Line 178 in 7a72a85
Possible Resolution:
Configuring the docker to allow containers to use ipv6 addresses:
The official documentaion of docker-compose suggests following while using ipv6 containers:
Before you can use IPv6 in Docker containers, you need to enable IPv6 support in the Docker daemon. Afterward, you can choose to use either IPv4 or IPv6 (or both) with any container or network.
Steps to configure:
- Edit the Docker daemon configuration file, located at
/etc/docker/daemon.json
. Configure the following parameters:
{
"experimental": true,
"ip6tables": true
}
ip6tables enables additional IPv6 packet filter rules, providing network isolation and port mapping. This parameter requires experimental to be set to true.
Note: you might need to create a new /etc/docker/daemon.json
if its not present
-
Save the configuration file.
-
Restart the Docker daemon for your changes to take effect.
sudo systemctl restart docker
Generated GRAFANA_URL_API is not accesible from external hosts
As Ceph-Dashboard's GRAFANA_URL_API is generated from the following expression:
GRAFANA_IP=$(getent ahosts grafana.dev | tail -1 | awk '{print $1}')
It fails to retrieve the external IP address (only the bridged network addresses are found).
A suggestion would be to guess the external IP address in the docker-compose.yml and pass it as an environment variable. Let's discuss here the different approaches.
../src/vstart.sh: No such file or directory
When using docker-compose up ceph I get the error /docker/start-ceph.sh: line 44: ../src/vstart.sh: No such file or directory
test issue for slack
Add post-install script to populate Ceph
Default Ceph install ends up with a very basic setup, so we should populate it with more complex settings:
- RBD pool
- RBD Images, snapshots
- Add data to RBD Images.
- More RBD pools?
- More RGW daemons?
- More RGW buckets
- More RGW users?
- Add objects to RGW buckets?
Additionally, we should decide if it's interesting to configure the following features:
- Config RBD-mirroring?
- Config iSCSI?
- Config NFS?
volume name is too short
When I perform a quick installation,report an error,I'm using the master branch,How can I fix this, thank you.
`[root@Nian ceph-dev]# docker-compose up
WARNING: The CEPH_REPO_DIR variable is not set. Defaulting to a blank string.
WARNING: The ALERTMANAGER_HOST_PORT variable is not set. Defaulting to a blank string.
WARNING: The GRAFANA_HOST_PORT variable is not set. Defaulting to a blank string.
WARNING: The NODE_EXPORTER_HOST_PORT variable is not set. Defaulting to a blank string.
WARNING: The PROMETHEUS_HOST_PORT variable is not set. Defaulting to a blank string.
WARNING: The CEPH2_REPO_DIR variable is not set. Defaulting to a blank string.
Starting node-exporter ...
Creating ceph ... error
Starting node-exporter ... done
Starting prometheus ...
Starting alertmanager ... done
Starting prometheus ... done
Starting grafana ... done
ERROR: for ceph Cannot create container for service ceph: create .: volume name is too short, names should be at least two alphanumeric characters
ERROR: Encountered errors while bringing up the project.
`
run_tox lint fails with deps error
✘ ~/projects/ceph-dev downstream-build-changes docker-compose run --rm ceph /docker/ci/sanity-checks.sh run_tox lint
Running Tox...
lint recreate: /ceph/src/pybind/mgr/dashboard/.tox/lint
lint installdeps: -rrequirements.txt, -cconstraints.txt, -rrequirements-lint.txt
ERROR: invocation failed (exit code 1), logfile: /ceph/src/pybind/mgr/dashboard/.tox/lint/log/lint-1.log
=============================================== log start ===============================================
Obtaining file:///ceph/src/python-common (from -r requirements.txt (line 8))
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'done'
Collecting bcrypt
Downloading bcrypt-3.1.4-cp36-cp36m-manylinux1_x86_64.whl (54 kB)
Collecting CherryPy
Downloading CherryPy-13.1.0-py2.py3-none-any.whl (430 kB)
Collecting more-itertools
Downloading more_itertools-8.14.0-py3-none-any.whl (52 kB)
Collecting PyJWT
Downloading PyJWT-2.0.1-py3-none-any.whl (15 kB)
Collecting pyopenssl
Downloading pyOpenSSL-23.0.0-py3-none-any.whl (57 kB)
Collecting requests
Downloading requests-2.26.0-py2.py3-none-any.whl (62 kB)
Collecting Routes
Downloading Routes-2.4.1-py2.py3-none-any.whl (48 kB)
Collecting prettytable
Downloading prettytable-2.5.0-py3-none-any.whl (24 kB)
Collecting pytest
Downloading pytest-7.0.1-py3-none-any.whl (296 kB)
Collecting pyyaml
Downloading PyYAML-6.0-cp36-cp36m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (603 kB)
Collecting natsort
Downloading natsort-8.2.0-py3-none-any.whl (37 kB)
Requirement already satisfied: setuptools in ./.tox/lint/lib/python3.6/site-packages (from -r requirements.txt (line 13)) (59.6.0)
Collecting jsonpatch
Downloading jsonpatch-1.32-py2.py3-none-any.whl (12 kB)
Collecting pylint==2.6.0
Downloading pylint-2.6.0-py3-none-any.whl (325 kB)
Collecting flake8==3.9.0
Downloading flake8-3.9.0-py2.py3-none-any.whl (73 kB)
Collecting flake8-colors==0.1.6
Downloading flake8-colors-0.1.6.tar.gz (2.2 kB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'done'
Collecting rstcheck==3.3.1
Downloading rstcheck-3.3.1.tar.gz (13 kB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'done'
Collecting autopep8==1.5.7
Downloading autopep8-1.5.7-py2.py3-none-any.whl (45 kB)
Collecting pyfakefs==4.5.0
Downloading pyfakefs-4.5.0-py3-none-any.whl (186 kB)
Collecting isort==5.5.3
Downloading isort-5.5.3-py3-none-any.whl (95 kB)
ERROR: Could not find a version that satisfies the requirement jsonschema==4.16.0 (from versions: 0.1a0, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8.0, 1.0.0, 1.1.0, 1.2.0, 1.3.0, 2.0.0, 2.1.0, 2.2.0, 2.3.0, 2.4.0, 2.5.0, 2.5.1, 2.6.0, 3.0.0a1, 3.0.0a2, 3.0.0a3, 3.0.0a4, 3.0.0a5, 3.0.0a6, 3.0.0b1, 3.0.0b2, 3.0.0b3, 3.0.0, 3.0.1, 3.0.2, 3.1.0, 3.1.1, 3.2.0, 4.0.0a1, 4.0.0a2, 4.0.0a3, 4.0.0a4, 4.0.0a5, 4.0.0a6, 4.0.0)
ERROR: No matching distribution found for jsonschema==4.16.0
================================================ log end ================================================
ERROR: could not install deps [-rrequirements.txt, -cconstraints.txt, -rrequirements-lint.txt]; v = InvocationError('/ceph/src/pybind/mgr/dashboard/.tox/lint/bin/python -m pip install -rrequirements.txt -cconstraints.txt -rrequirements-lint.txt', 1)
________________________________________________ summary ________________________________________________
ERROR: lint: could not install deps [-rrequirements.txt, -cconstraints.txt, -rrequirements-lint.txt]; v = InvocationError('/ceph/src/pybind/mgr/dashboard/.tox/lint/bin/python -m pip install -rrequirements.txt -cconstraints.txt -rrequirements-lint.txt', 1)
docker-compose run --rm ceph /docker/build-dashboard-frontend.sh failure
OS Linux ubuntu 5.15.0-48-generic #54~20.04.1-Ubuntu SMP Thu Sep 1 16:17:26 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
Docker version 20.10.18, build b40c2f6
docker-compose version 1.29.2, build 5becea4c
run: docker-compse up -d
after
run: docker-compose run --rm ceph /docker/build-dashboard-frontend.sh failure
logs:
Creating ceph-dev_ceph_run ... done
npm WARN using --force I sure hope you know what you are doing.
npm WARN prepare removing existing node_modules/ before installation
[email protected] install /ceph/src/pybind/mgr/dashboard/frontend/node_modules/webpack-dev-server/node_modules/fsevents
node install.js
Skipping 'fsevents' build as platform linux is not supported
[email protected] install /ceph/src/pybind/mgr/dashboard/frontend/node_modules/nice-napi
node-gyp-build
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/@angular-devkit/build-angular/node_modules/esbuild
node install.js
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/@angular-devkit/build-angular/node_modules/core-js
node -e "try{require('./postinstall')}catch(e){}"
Thank you for using core-js ( https://github.com/zloirock/core-js ) for polyfilling JavaScript standard library!
The project needs your help! Please consider supporting of core-js:
https://opencollective.com/core-js
https://patreon.com/zloirock
https://paypal.me/zloirock
bitcoin: bc1qlea7544qtsmj2rayg0lthvza9fau63ux0fstcz
Also, the author of core-js ( https://github.com/zloirock ) is looking for a good job -)
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/core-js-pure
node -e "try{require('./postinstall')}catch(e){}"
Thank you for using core-js ( https://github.com/zloirock/core-js ) for polyfilling JavaScript standard library!
The project needs your help! Please consider supporting of core-js:
https://opencollective.com/core-js
https://patreon.com/zloirock
bitcoin: bc1qlea7544qtsmj2rayg0lthvza9fau63ux0fstcz
Also, the author of core-js ( https://github.com/zloirock ) is looking for a good job -)
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/core-js
node -e "try{require('./postinstall')}catch(e){}"
Thank you for using core-js ( https://github.com/zloirock/core-js ) for polyfilling JavaScript standard library!
The project needs your help! Please consider supporting of core-js:
https://opencollective.com/core-js
https://patreon.com/zloirock
bitcoin: bc1qlea7544qtsmj2rayg0lthvza9fau63ux0fstcz
Also, the author of core-js ( https://github.com/zloirock ) is looking for a good job -)
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/protobufjs
node scripts/postinstall
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/gherkin-lint/node_modules/core-js
node -e "try{require('./postinstall')}catch(e){}"
Thank you for using core-js ( https://github.com/zloirock/core-js ) for polyfilling JavaScript standard library!
The project needs your help! Please consider supporting of core-js on Open Collective or Patreon:
https://opencollective.com/core-js
https://www.patreon.com/zloirock
Also, the author of core-js ( https://github.com/zloirock ) is looking for a good job -)
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/es5-ext
node -e "try{require('./_postinstall')}catch(e){}" || exit 0
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/cucumber/node_modules/cucumber-expressions
node scripts/postinstall.js
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/babel-runtime/node_modules/core-js
node -e "try{require('./postinstall')}catch(e){}"
Thank you for using core-js ( https://github.com/zloirock/core-js ) for polyfilling JavaScript standard library!
The project needs your help! Please consider supporting of core-js on Open Collective or Patreon:
https://opencollective.com/core-js
https://www.patreon.com/zloirock
Also, the author of core-js ( https://github.com/zloirock ) is looking for a good job -)
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/cypress
node index.js --exec install
Note: Overriding Cypress cache directory to: /ceph/build.cypress
Previous installs of Cypress may not be found.
Cypress 9.7.0 is installed in /ceph/build.cypress/9.7.0
[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/@grafana/e2e/node_modules/cypress
node index.js --exec install
Note: Overriding Cypress cache directory to: /ceph/build.cypress
Previous installs of Cypress may not be found.
Cypress 9.3.1 is installed in /ceph/build.cypress/9.3.1
@compodoc/[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/@compodoc/compodoc
opencollective-postinstall || exit 0
Thank you for using @compodoc/compodoc!
If you rely on this package, please consider supporting our open collective:
@angular/[email protected] postinstall /ceph/src/pybind/mgr/dashboard/frontend/node_modules/@angular/cli
node ./bin/postinstall/script.js
npm WARN lifecycle [email protected]~postinstall: cannot run in wd [email protected] ngcc --properties es2015 browser module main --async false --first-only --tsconfig 'tsconfig.app.json' (wd=/ceph/src/pybind/mgr/dashboard/frontend)
added 3067 packages in 89.24s
make: *** No rule to make target 'mgr-dashboard-frontend-build'. Stop.
ERROR: 2
test issue
test issue as previous one (#11) has just disappeared.
Quick install setup hangs on F32
When setting up the environment on F32, after creating the images with docker-compose up d
,
docker-compose logs -f ceph
only shows attaching to ceph
and makes no progress.
This does not seem to be related to docker/docker-compose versions nor docker engine.
The same behavior was replicated using:
docker 19.03.9
docker-ce
docker-moby engine
docker-compose 1.21.0
docker-compose 1.25.4
Downgraded to F31 and faced no issues following the exact workflow as described in the README.
centos7: build-ceph.sh fails due to package problem with `devtoolset`
When trying to build ceph on centos7, build-ceph.sh
fails and returns a non-zero exit code due to an issue with the devtoolset
package.
The workaround is to replace install-deps.sh
in build-ceph.sh
with install-deps.sh || true
, but that's not a solution I'd like to propose to adopt.
When I tried the project out a few weeks ago, that was an issue and it is still an issue, so I thought it's worth reporting it.
Note that the output of build-ceph.sh
here is slightly more verbose than what build-ceph.sh
usually produces, as I added set -x
at the beginning of that script.
docker-compose run --rm ceph /docker/build-ceph.sh
Verifying : mesa-libEGL-devel-18.0.5-4.el7_6.x86_64 34/64
Verifying : libXxf86vm-devel-1.1.4-1.el7.x86_64 35/64
Verifying : qt5-qtbase-5.9.2-3.el7.x86_64 36/64
Verifying : libicu-50.1.2-17.el7.x86_64 37/64
Verifying : erlang-rpm-macros-0.1.4-1.el7.noarch 38/64
Verifying : 1:libglvnd-opengl-1.0.1-0.8.git5baa1e5.el7.x86_64 39/64
Verifying : blis-srpm-macros-0.4.1-2.el7.noarch 40/64
Verifying : libXext-devel-1.3.3-3.el7.x86_64 41/64
Verifying : mesa-libGL-devel-18.0.5-4.el7_6.x86_64 42/64
Verifying : prelink-0.5.0-9.el7.x86_64 43/64
Verifying : ghc-rpm-macros-1.0.11-1.el7.x86_64 44/64
Verifying : qt5-qtbase-common-5.9.2-3.el7.noarch 45/64
Verifying : pcre2-utf16-10.23-2.el7.x86_64 46/64
Verifying : ghc-base-devel-4.6.0.1-26.4.el7.x86_64 47/64
Verifying : python3-other-rpm-macros-3-25.el7.noarch 48/64
Verifying : python3-rpm-macros-3-25.el7.noarch 49/64
Verifying : libxcb-devel-1.13-1.el7.x86_64 50/64
Verifying : libdrm-devel-2.4.91-3.el7.x86_64 51/64
Verifying : libX11-devel-1.6.5-2.el7.x86_64 52/64
Verifying : libXfixes-devel-5.0.3-1.el7.x86_64 53/64
Verifying : qt5-qtbase-gui-5.9.2-3.el7.x86_64 54/64
Verifying : xcb-util-0.4.0-2.el7.x86_64 55/64
Verifying : glx-utils-8.3.0-10.el7.x86_64 56/64
Verifying : unzip-6.0-19.el7.x86_64 57/64
Verifying : erlang-erts-R16B-03.18.el7.x86_64 58/64
Verifying : libXau-devel-1.0.8-2.1.el7.x86_64 59/64
Verifying : elfutils-0.172-2.el7.x86_64 60/64
Verifying : kf5-rpm-macros-5.52.0-1.el7.noarch 61/64
Verifying : python-srpm-macros-3-22.el7.noarch 62/64
Verifying : python-rpm-macros-3-22.el7.noarch 63/64
Verifying : python3-rpm-macros-3-22.el7.noarch 64/64
Installed:
blender-rpm-macros.noarch 1:2.68a-8.el7 blis-srpm-macros.noarch 0:0.4.1-2.el7
epel-rpm-macros.noarch 0:7-19 erlang-rpm-macros.noarch 0:0.1.4-1.el7
ghc-rpm-macros.x86_64 0:1.0.11-1.el7 kf5-rpm-macros.noarch 0:5.52.0-1.el7
ocaml-srpm-macros.noarch 0:5-2.el7 openblas-srpm-macros.noarch 0:1-1.el7
python-qt5-rpm-macros.noarch 0:5.12.1-2.el7 python2-rpm-macros.noarch 0:3-25.el7
python3-other-rpm-macros.noarch 0:3-25.el7 qt5-rpm-macros.noarch 0:5.9.2-3.el7
Dependency Installed:
elfutils.x86_64 0:0.172-2.el7
erlang-compiler.x86_64 0:R16B-03.18.el7
erlang-crypto.x86_64 0:R16B-03.18.el7
erlang-erts.x86_64 0:R16B-03.18.el7
erlang-hipe.x86_64 0:R16B-03.18.el7
erlang-kernel.x86_64 0:R16B-03.18.el7
erlang-stdlib.x86_64 0:R16B-03.18.el7
erlang-syntax_tools.x86_64 0:R16B-03.18.el7
gdb.x86_64 0:7.6.1-114.el7
ghc-base.x86_64 0:4.6.0.1-26.4.el7
ghc-base-devel.x86_64 0:4.6.0.1-26.4.el7
ghc-compiler.x86_64 0:7.6.3-26.4.el7
gl-manpages.noarch 0:1.1-7.20130122.el7
glx-utils.x86_64 0:8.3.0-10.el7
gmp-devel.x86_64 1:6.0.0-15.el7
hscolour.x86_64 0:1.20.3-9.el7
libX11-devel.x86_64 0:1.6.5-2.el7
libXau-devel.x86_64 0:1.0.8-2.1.el7
libXdamage-devel.x86_64 0:1.1.4-4.1.el7
libXext-devel.x86_64 0:1.3.3-3.el7
libXfixes-devel.x86_64 0:5.0.3-1.el7
libXxf86vm-devel.x86_64 0:1.1.4-1.el7
libdrm-devel.x86_64 0:2.4.91-3.el7
libffi-devel.x86_64 0:3.0.13-18.el7
libglvnd-core-devel.x86_64 1:1.0.1-0.8.git5baa1e5.el7
libglvnd-devel.x86_64 1:1.0.1-0.8.git5baa1e5.el7
libglvnd-gles.x86_64 1:1.0.1-0.8.git5baa1e5.el7
libglvnd-opengl.x86_64 1:1.0.1-0.8.git5baa1e5.el7
libicu.x86_64 0:50.1.2-17.el7
libxcb-devel.x86_64 0:1.13-1.el7
mesa-libEGL-devel.x86_64 0:18.0.5-4.el7_6
mesa-libGL-devel.x86_64 0:18.0.5-4.el7_6
pcre2-utf16.x86_64 0:10.23-2.el7
prelink.x86_64 0:0.5.0-9.el7
qt5-qtbase.x86_64 0:5.9.2-3.el7
qt5-qtbase-common.noarch 0:5.9.2-3.el7
qt5-qtbase-devel.x86_64 0:5.9.2-3.el7
qt5-qtbase-gui.x86_64 0:5.9.2-3.el7
rpm-build.x86_64 0:4.11.3-35.el7
unzip.x86_64 0:6.0-19.el7
xcb-util.x86_64 0:0.4.0-2.el7
xcb-util-image.x86_64 0:0.4.0-2.el7
xcb-util-keysyms.x86_64 0:0.4.0-1.el7
xcb-util-renderutil.x86_64 0:0.3.9-3.el7
xcb-util-wm.x86_64 0:0.4.1-5.el7
xorg-x11-proto-devel.noarch 0:2018.4-1.el7
Updated:
python-rpm-macros.noarch 0:3-25.el7 python-srpm-macros.noarch 0:3-25.el7
python3-rpm-macros.noarch 0:3-25.el7
Complete!
Loaded plugins: auto-update-debuginfo, fastestmirror, ovl
Enabling base-source repository
Enabling centos-sclo-rh-source repository
Enabling centos-sclo-sclo-source repository
Enabling epel-source repository
Enabling extras-source repository
Enabling updates-source repository
Loading mirror speeds from cached hostfile
* base: mirror.softaculous.com
* epel: ftp.plusline.net
* epel-debuginfo: ftp.plusline.net
* epel-source: mirror.karneval.cz
* extras: centosmirror.netcup.net
* updates: mirror.ratiokontakt.de
Checking for new repos for mirrors
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
sh: /usr/bin/python3.6: No such file or directory
Getting requirements for /tmp/install-deps.9/ceph.spec
--> Already installed : 1:java-1.8.0-openjdk-devel-1.8.0.191.b12-1.el7_6.x86_64
--> Already installed : sharutils-4.13.3-8.el7.x86_64
--> Already installed : checkpolicy-2.5-8.el7.x86_64
--> Already installed : selinux-policy-devel-3.13.1-229.el7_6.9.noarch
--> Already installed : gperf-3.0.4-8.el7.x86_64
--> Already installed : cmake3-3.13.4-1.el7.x86_64
--> Already installed : cryptsetup-2.0.3-3.el7.x86_64
--> Already installed : fuse-devel-2.9.2-11.el7.x86_64
--> devtoolset-8-gcc-c++-8.2.1-3.el7.x86_64
--> Already installed : gdbm-1.10-8.el7.x86_64
--> Already installed : gperftools-devel-2.6.1-1.el7.x86_64
--> Already installed : leveldb-devel-1.12.0-11.el7.x86_64
--> Already installed : libaio-devel-0.3.109-13.el7.x86_64
--> Already installed : libblkid-devel-2.23.2-59.el7.x86_64
--> Already installed : libcurl-devel-7.29.0-51.el7.x86_64
--> Already installed : systemd-devel-219-62.el7_6.5.x86_64
--> libnl3-devel-3.2.28-4.el7.x86_64
--> Already installed : liboath-devel-2.4.1-9.el7.x86_64
--> Already installed : libtool-2.4.2-22.el7_3.x86_64
--> Already installed : libxml2-devel-2.9.1-6.el7_2.3.x86_64
--> Already installed : libuuid-devel-2.23.2-59.el7.x86_64
--> Already installed : 1:make-3.82-23.el7.x86_64
--> Already installed : ncurses-devel-5.9-14.20130511.el7_4.x86_64
--> Already installed : parted-3.1-29.el7.x86_64
--> Already installed : patch-2.7.1-10.el7_5.x86_64
--> Already installed : 4:perl-5.16.3-294.el7_6.x86_64
--> Already installed : 1:pkgconfig-0.27.1-4.el7.x86_64
--> Already installed : procps-ng-3.3.10-23.el7.x86_64
--> Already installed : python-2.7.5-76.el7.x86_64
--> Already installed : python-devel-2.7.5-76.el7.x86_64
--> Already installed : snappy-devel-1.1.0-3.el7.x86_64
--> Already installed : sudo-1.8.23-3.el7.x86_64
--> Already installed : systemd-219-62.el7_6.5.x86_64
--> Already installed : util-linux-2.23.2-59.el7.x86_64
--> Already installed : 1:valgrind-devel-3.13.0-13.el7.x86_64
--> Already installed : which-2.20-7.el7.x86_64
--> Already installed : xfsprogs-4.5.0-18.el7.x86_64
--> Already installed : xfsprogs-devel-4.5.0-18.el7.x86_64
--> Already installed : xmlstarlet-1.6.1-1.el7.x86_64
--> Already installed : yasm-1.2.0-4.el7.x86_64
--> Already installed : librabbitmq-devel-0.8.0-2.el7.x86_64
--> Already installed : jq-1.5-1.el7.x86_64
--> Already installed : python2-bcrypt-3.1.4-4.el7.x86_64
--> Already installed : python-coverage-3.6-0.5.b3.el7.x86_64
--> Already installed : python-nose-1.3.7-1.el7.noarch
--> Already installed : python-pecan-0.4.5-2.el7.noarch
--> Already installed : python-requests-2.6.0-1.el7_1.noarch
--> Already installed : python-six-1.9.0-2.el7.noarch
--> Already installed : python-tox-1.4.2-8.el7.noarch
--> Already installed : python-virtualenv-15.1.0-2.el7.noarch
--> Already installed : pyOpenSSL-0.13.1-4.el7.x86_64
--> Already installed : socat-1.7.3.2-2.el7.x86_64
--> Already installed : boost-random-1.53.0-27.el7.x86_64
--> Already installed : nss-devel-3.36.0-7.1.el7_6.x86_64
--> Already installed : keyutils-libs-devel-1.5.8-3.el7.x86_64
--> Already installed : rdma-core-devel-17.2-3.el7.x86_64
--> Already installed : rdma-core-devel-17.2-3.el7.x86_64
--> Already installed : openldap-devel-2.4.44-21.el7_6.x86_64
--> Already installed : 1:openssl-devel-1.0.2k-16.el7.x86_64
--> Already installed : CUnit-devel-2.1.3-13.el7.x86_64
--> Already installed : redhat-lsb-core-4.1-27.el7.centos.1.x86_64
--> Already installed : Cython-0.19-5.el7.x86_64
--> python36-devel-3.6.8-1.el7.x86_64
--> python36-setuptools-39.2.0-3.el7.noarch
--> python36-Cython-0.28.4-3.el7.x86_64
--> Already installed : python-prettytable-0.7.2-3.el7.noarch
--> Already installed : python-sphinx-1.1.3-11.el7.noarch
--> Already installed : lz4-devel-1.7.5-2.el7.x86_64
--> Already installed : python-cherrypy-3.2.2-4.el7.noarch
--> Already installed : python-jwt-1.5.3-1.el7.noarch
--> Already installed : python-routes-1.13-2.el7.noarch
--> Already installed : python-werkzeug-0.9.1-2.el7.noarch
--> Already installed : xmlsec1-1.2.20-7.el7_4.x86_64
--> Already installed : lttng-ust-devel-2.4.1-4.el7.x86_64
--> Already installed : libbabeltrace-devel-1.2.4-3.el7.x86_64
--> Already installed : expat-devel-2.1.0-10.el7_3.x86_64
--> Already installed : redhat-rpm-config-9.1.0-87.el7.centos.noarch
--> Already installed : junit-4.11-8.el7.noarch
--> Running transaction check
---> Package devtoolset-8-gcc-c++.x86_64 0:8.2.1-3.el7 will be installed
--> Processing Dependency: devtoolset-8-libstdc++-devel = 8.2.1-3.el7 for package: devtoolset-8-gcc-c++-8.2.1-3.el7.x86_64
--> Processing Dependency: devtoolset-8-gcc = 8.2.1-3.el7 for package: devtoolset-8-gcc-c++-8.2.1-3.el7.x86_64
--> Processing Dependency: devtoolset-8-runtime for package: devtoolset-8-gcc-c++-8.2.1-3.el7.x86_64
---> Package libnl3-devel.x86_64 0:3.2.28-4.el7 will be installed
--> Processing Dependency: libnl3-cli = 3.2.28-4.el7 for package: libnl3-devel-3.2.28-4.el7.x86_64
--> Processing Dependency: libnl-cli-3.so.200()(64bit) for package: libnl3-devel-3.2.28-4.el7.x86_64
---> Package python34-devel.x86_64 0:3.4.9-2.el7 will be obsoleted
---> Package python36-Cython.x86_64 0:0.28.4-3.el7 will be installed
--> Processing Dependency: python(abi) = 3.6 for package: python36-Cython-0.28.4-3.el7.x86_64
Package: python36-3.6.8-1.el7.src - can't co-install with python36-3.6.8-1.el7.x86_64
--> Processing Dependency: /usr/bin/python3.6 for package: python36-Cython-0.28.4-3.el7.x86_64
--> Processing Dependency: libpython3.6m.so.1.0()(64bit) for package: python36-Cython-0.28.4-3.el7.x86_64
---> Package python36-devel.x86_64 0:3.6.8-1.el7 will be obsoleting
---> Package python36-setuptools.noarch 0:39.2.0-3.el7 will be installed
--> Running transaction check
---> Package devtoolset-8-gcc.x86_64 0:8.2.1-3.el7 will be installed
--> Processing Dependency: devtoolset-8-binutils >= 2.22.52.0.1 for package: devtoolset-8-gcc-8.2.1-3.el7.x86_64
---> Package devtoolset-8-libstdc++-devel.x86_64 0:8.2.1-3.el7 will be installed
---> Package devtoolset-8-runtime.x86_64 0:8.1-1.el7 will be installed
---> Package libnl3-cli.x86_64 0:3.2.28-4.el7 will be installed
---> Package python34.x86_64 0:3.4.9-2.el7 will be obsoleted
--> Processing Dependency: python(abi) = 3.4 for package: python34-setuptools-39.2.0-2.el7.noarch
--> Processing Dependency: python(abi) = 3.4 for package: python34-Cython-0.23.5-1.el7.x86_64
---> Package python34-libs.x86_64 0:3.4.9-2.el7 will be obsoleted
--> Processing Dependency: libpython3.4m.so.1.0()(64bit) for package: python34-Cython-0.28.4-3.el7.x86_64
--> Processing Dependency: libpython3.4m.so.1.0()(64bit) for package: python34-3.4.10-2.el7.x86_64
---> Package python36.x86_64 0:3.6.8-1.el7 will be obsoleting
---> Package python36-libs.x86_64 0:3.6.8-1.el7 will be obsoleting
--> Running transaction check
---> Package devtoolset-8-binutils.x86_64 0:2.30-54.el7 will be installed
---> Package python34.x86_64 0:3.4.9-2.el7 will be updated
---> Package python34.x86_64 0:3.4.10-2.el7 will be an update
---> Package python34-Cython.x86_64 0:0.23.5-1.el7 will be updated
---> Package python34-Cython.x86_64 0:0.28.4-3.el7 will be an update
---> Package python34-libs.x86_64 0:3.4.9-2.el7 will be updated
---> Package python34-libs.x86_64 0:3.4.10-2.el7 will be an update
---> Package python34-setuptools.noarch 0:39.2.0-2.el7 will be updated
---> Package python34-setuptools.noarch 0:39.2.0-3.el7 will be an update
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
devtoolset-8-gcc-c++ x86_64 8.2.1-3.el7 centos-sclo-rh 12 M
libnl3-devel x86_64 3.2.28-4.el7 base 71 k
python36 x86_64 3.6.8-1.el7 epel 67 k
replacing python34.x86_64 3.4.9-2.el7
python36-Cython x86_64 0.28.4-3.el7 epel 3.4 M
python36-devel x86_64 3.6.8-1.el7 epel 850 k
replacing python34-devel.x86_64 3.4.9-2.el7
python36-libs x86_64 3.6.8-1.el7 epel 8.6 M
replacing python34-libs.x86_64 3.4.9-2.el7
python36-setuptools noarch 39.2.0-3.el7 epel 631 k
Installing for dependencies:
devtoolset-8-binutils x86_64 2.30-54.el7 centos-sclo-rh 5.5 M
devtoolset-8-gcc x86_64 8.2.1-3.el7 centos-sclo-rh 31 M
devtoolset-8-libstdc++-devel x86_64 8.2.1-3.el7 centos-sclo-rh 2.7 M
devtoolset-8-runtime x86_64 8.1-1.el7 centos-sclo-rh 20 k
libnl3-cli x86_64 3.2.28-4.el7 base 160 k
Updating for dependencies:
python34 x86_64 3.4.10-2.el7 epel 51 k
python34-Cython x86_64 0.28.4-3.el7 epel 3.4 M
python34-libs x86_64 3.4.10-2.el7 epel 8.3 M
python34-setuptools noarch 39.2.0-3.el7 epel 640 k
Transaction Summary
================================================================================
Install 7 Packages (+5 Dependent packages)
Upgrade ( 4 Dependent packages)
Total download size: 77 M
Downloading packages:
Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
--------------------------------------------------------------------------------
Total 3.0 MB/s | 77 MB 00:25
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : python36-libs-3.6.8-1.el7.x86_64 1/21
Installing : python36-3.6.8-1.el7.x86_64 2/21
Installing : devtoolset-8-runtime-8.1-1.el7.x86_64 3/21
ValueError: SELinux policy is not managed or store cannot be accessed.
Updating : python34-libs-3.4.10-2.el7.x86_64 4/21
Updating : python34-3.4.10-2.el7.x86_64 5/21
Installing : devtoolset-8-libstdc++-devel-8.2.1-3.el7.x86_64 6/21
Installing : devtoolset-8-binutils-2.30-54.el7.x86_64 7/21
install-info: No such file or directory for /opt/rh/devtoolset-8/root/usr/share/info/as.info.gz
install-info: No such file or directory for /opt/rh/devtoolset-8/root/usr/share/info/binutils.info.gz
install-info: No such file or directory for /opt/rh/devtoolset-8/root/usr/share/info/gprof.info.gz
install-info: No such file or directory for /opt/rh/devtoolset-8/root/usr/share/info/ld.info.gz
install-info: No such file or directory for /opt/rh/devtoolset-8/root/usr/share/info/standards.info.gz
Installing : libnl3-cli-3.2.28-4.el7.x86_64 8/21
Installing : libnl3-devel-3.2.28-4.el7.x86_64 9/21
Updating : python34-Cython-0.28.4-3.el7.x86_64 10/21
Updating : python34-setuptools-39.2.0-3.el7.noarch 11/21
Installing : python36-devel-3.6.8-1.el7.x86_64 12/21
Installing : python36-setuptools-39.2.0-3.el7.noarch 13/21
Installing : python36-Cython-0.28.4-3.el7.x86_64 14/21
Installing : devtoolset-8-gcc-8.2.1-3.el7.x86_64 15/21
Installing : devtoolset-8-gcc-c++-8.2.1-3.el7.x86_64 16/21
Erasing : python34-devel-3.4.9-2.el7.x86_64 17/21
Cleanup : python34-Cython-0.23.5-1.el7.x86_64 18/21
Cleanup : python34-setuptools-39.2.0-2.el7.noarch 19/21
Cleanup : python34-libs-3.4.9-2.el7.x86_64 20/21
Cleanup : python34-3.4.9-2.el7.x86_64 21/21
Verifying : devtoolset-8-libstdc++-devel-8.2.1-3.el7.x86_64 1/21
Verifying : python36-devel-3.6.8-1.el7.x86_64 2/21
Verifying : python36-setuptools-39.2.0-3.el7.noarch 3/21
Verifying : python34-Cython-0.28.4-3.el7.x86_64 4/21
Verifying : libnl3-devel-3.2.28-4.el7.x86_64 5/21
Verifying : devtoolset-8-binutils-2.30-54.el7.x86_64 6/21
Verifying : python34-3.4.10-2.el7.x86_64 7/21
Verifying : python34-libs-3.4.10-2.el7.x86_64 8/21
Verifying : python36-3.6.8-1.el7.x86_64 9/21
Verifying : python36-Cython-0.28.4-3.el7.x86_64 10/21
Verifying : devtoolset-8-gcc-c++-8.2.1-3.el7.x86_64 11/21
Verifying : devtoolset-8-gcc-8.2.1-3.el7.x86_64 12/21
Verifying : libnl3-cli-3.2.28-4.el7.x86_64 13/21
Verifying : devtoolset-8-runtime-8.1-1.el7.x86_64 14/21
Verifying : python36-libs-3.6.8-1.el7.x86_64 15/21
Verifying : python34-setuptools-39.2.0-3.el7.noarch 16/21
Verifying : python34-devel-3.4.9-2.el7.x86_64 17/21
Verifying : python34-Cython-0.23.5-1.el7.x86_64 18/21
Verifying : python34-libs-3.4.9-2.el7.x86_64 19/21
Verifying : python34-libs-3.4.9-2.el7.x86_64 20/21
Verifying : python34-3.4.9-2.el7.x86_64 21/21
Verifying : python34-3.4.9-2.el7.x86_64 22/21
Verifying : python34-setuptools-39.2.0-2.el7.noarch 23/21
Installed:
devtoolset-8-gcc-c++.x86_64 0:8.2.1-3.el7
libnl3-devel.x86_64 0:3.2.28-4.el7
python36.x86_64 0:3.6.8-1.el7
python36-Cython.x86_64 0:0.28.4-3.el7
python36-devel.x86_64 0:3.6.8-1.el7
python36-libs.x86_64 0:3.6.8-1.el7
python36-setuptools.noarch 0:39.2.0-3.el7
Dependency Installed:
devtoolset-8-binutils.x86_64 0:2.30-54.el7
devtoolset-8-gcc.x86_64 0:8.2.1-3.el7
devtoolset-8-libstdc++-devel.x86_64 0:8.2.1-3.el7
devtoolset-8-runtime.x86_64 0:8.1-1.el7
libnl3-cli.x86_64 0:3.2.28-4.el7
Dependency Updated:
python34.x86_64 0:3.4.10-2.el7 python34-Cython.x86_64 0:0.28.4-3.el7
python34-libs.x86_64 0:3.4.10-2.el7 python34-setuptools.noarch 0:39.2.0-3.el7
Replaced:
python34.x86_64 0:3.4.9-2.el7 python34-devel.x86_64 0:3.4.9-2.el7
python34-libs.x86_64 0:3.4.9-2.el7
Complete!
root@ceph-mgr-dev-lp ~/src/ceph-dev-r ±master⚡ # 1 ↵
restart-dashboard.sh can be simplified
https://github.com/rhcs-dashboard/ceph-dev/blob/master/docker/ceph/restart-dashboard.sh
actually all you need to do is to run ceph mgr fail <pidof mgr>
. this will restart the MGR once, instead of twice.
Publish ceph images is failing for master and pacific
It looks like for somedays the master and pacific ceph image building (not rpm ones) is failing consistently after running the install-deps.sh
script. It started appearing after ceph/ceph@57edb76 in both master and pacific.
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.