esp32-wroom32-dev-board's Introduction

ESP32-WROOM32-Dev-Board

I decided a while back that I wanted to design, build and open source a WROOM32 ESP32 development board that was designed to plug a 2.1mm 5V power supply directly into it to drive high loads like hundreds of SK6812B's or 64x32 RGB Matrix Panels.

My revision 2 board works great, but uses a fairly expensive FT231XS FTDI USB Serial chip, so I thought I'd try to redesign it to use a cheap CH340C USB chip that has a built in oscillator to reduce parts.

My aim was to drive the CH340C from 3.3V and not 5V, and the data sheets suggests this is possible, but from my experience, it’s a terrible implementation.

So I have 2x CH340C folders… Rev4 - CH340C driven from 3.3V Rev5 - CH340C driven from 5V

Feel free to give the 3.3V version a whirl and if you can get ti working, please let me know how!

Anyway, this was just an experiment and it’s been a fun and frustrating journey, but I learnt a lot doing this and I’ve learnt stacks more since starting this project, so it’s time to let the files out into the wild so others can have a play with them.

Enjoy!

Support Unexpected Maker

I love designing, making and releasing our projects as open source. I do it because I believe it’s important to share knowledge and give back to the community, like many have done before me. It helps us all learn and grow.

That said, a lot of time, effort and finances have gone into designing and releasing these files, so please consider supporting me by buy some of my TiinyPICO products:

https://tinypico.com/shop

Or by buying one of our products on tindie:

https://www.tindie.com/stores/seonr/

Or by becoming a Patron: