#raspio-breakout-pro
https://github.com/raspitv/raspio-breakout-pro
RasPiO® Breakout Pro Python scripts
By Alex Eames http://RasPi.TV
These scripts go with the RasPiO® Breakout Pro board http://rasp.io/breakoutpro
##Preparation
Connect a wire from each port to an LED (long leg, +ve side). Connect the other end of the LED to GND.
With the RasPiO® Breakout Pro, you don't need a resistor for your LED as there is already one on the underside of the board.
Do this for each port with a GPIO number (17 altogether). Then you are ready to test the ports.
##Contents
Run each script by typing
sudo python scriptname.py
With these scripts you should be able to...
- port-test.py - up and down pattern, increasing speed
- port-test-pwm1.py - brighten and dim the leds in succession
- port-test-pwm2.py - brighten and dim alternate sides
- port-test-pwm3.py - brighten and dim alternate groups of leds
##Enjoy
Have fun connecting things to your Raspberry Pi