rafadono / migfem Goto Github PK
View Code? Open in Web Editor NEWThis project forked from vinhphunguyen/migfem
Isogeometric finite elements in Matlab
This project forked from vinhphunguyen/migfem
Isogeometric finite elements in Matlab
This is the README file for MIGFEM--the Isogeometric Analysis (IGA) Matlab code. The code supports one, two and three dimensional linear elasticity problems. Extended IGA for hole, inclusion and crack modelling is also implemented. Structural mechanics problems including Euler beam and Kirchoff plates/shells (rotation-free formulations), Reissner-Mindlin plates are implemented as well. The features of the code include: - Global h-refinement using knot insertion is provided for one and two dimensional meshes. - p- and k-refinement via Geopdes library are also supported. - Extended IGA which is a Partition of Unity enrichment IGA for 2D traction-free cracks is also implemented. Level sets are used to detect enriched nodes. However, enrichment functions are defined in terms of standard geometry i.e. not in terms of level sets. Holes and inclusions are also implemented. - An ad hoc implementation for 3D cracks is also provided. In this case, level sets are used both for enrichment detection and enrichment function evaluation. - Visualization of displacements, stresses are done in Paraview by exporting the results to a VTU file. Mesh for visualization purpose is Q4 in 2D and B8 in 3D where B8 denotes tri-linear brick elements. - Inhomogeneous Dirichlet boundary conditions are treated with the penalty method, Lagrange multiplier method and the least square method. - Numerical integration: (o) elements cut by cracks: sub-triangulation (o) elements cut by circular holes/inclusions: adaptive sub-cells (used in Finite Cell Method) - Fast assembly of FE stiffness using the triple sparse matrix format (see files of which names end with FastAssembly in folder iga) - Tsplines based on Bezier extraction operators. See folder bezier_extraction. - Bsplines/NURBS basis functions are implemented using MEX files for better performances. - Beams and plates/shells without rotation dofs. See folder structural_mechanics. - Modal analysis. See folder structural-mechanics/. - 2D/3D large displacement/rotation continuum elements (Total Lagrange). - Disretisation and model coupling with Arlequin and Nitsche method (development version). - Material Point Method 2D (development version) Written by: Vinh Phu Nguyen, Delft University of Technology, The Netherlands Cardiff University, Wales, UK [email protected] and which uses MEX files implementation of Bsplines written by Robert Simpson Cardiff University, Wales, UK Please cite our paper when using this package: V.P. Nguyen, C. Anitescu, S. Bordas, T. Rabczuk "Isogeometric analysis: an overview and computer implementation aspects". Mathematics and Computers in Simulation, 117, 89-116, 2015. Before using the M files, you should first compile some C codes implemented as MEX files. Open Matlab and in the command line, type the following commands (make sure your PC has C compiler such as gcc and you did mex -setup in Matlab) compile Actually compile.m contains commands to compile MEX files. For details on MEX files, we refer to http://www.mathworks.com/support/tech-notes/1600/1605.html. Our MEX files were compiled on Mac OS Lion and Ubuntu with gcc 4.2.1 and gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) (Tested /w Fedora 18). We have not tested with other compilers. Please consult the aforementioned website for details. REMARKS: The displacement vectors are organized as U=[ux_1 uy_1 ux_2 uy_2 ...] in 2D U=[ux_1 uy_1 uz_1 ux_2 uy_2 uz_2...] in 3D For the Mindlin plate elements, the unknown vector is structured as U=[ux_1 theta_x1 theta_y1 ux_2 theta_x2 theta_y2 ...] The package is structured into sub-folders which are described in what follows. I. Main script files: one file for one problem. The names of the files are already self explainary. These files can be found in folder "iga". ******************************************************************* 1. igaLShaped.m 2. igaPlateCircularHole.m 3. igaPlateTension.m 4. igaTimoshenkoBeam.m 5. igaCurvedBeam.m 6. igaPlateCircularInclusion.m ******************************************************************* Do not run the file 'iga2d.m'. This file is the first version of the code and is not compatible with later improvement. and files start with "xiga" for linear elastic fracture mechanics problems. These files can be found in folder "xiga". 1. xigaEdgeCrack.m 2. xigaEdgeShearCrack.m 3. xigaTwoEdgeCracks.m 4. xigaCenterCrack.m 5. xigaInfiniteCrackModeI.m 6. xigaInfiniteCrackModeII.m 7. xigaInfiniteCrackModeILM.m 8. xigaInfiniteCrackModeILeastSquare.m 9. xigaEdgeCrack3d.m 10.xigaInfiniteCrack3d.m and some simple 3D elasticity problems 1. iga3dBeam.m 2. igaThickCylinder.m 3. igaPinchedCylinder.m We refer to folder bezier-extraction for some 2D elasticity problems but now implemented using the Bezier extraction operators. Structural mechanics examples can be found in folder structural-mechanics. II. Data files: control points, knots, orders. These files can be found in folder "data". ******************************************************************* 5. plateHoleData.m 6. timoshenkoBeamData.m 7. timoshenkoBeamC1Data.m 8. LShapedData.m 9. LShapedC1Data.m 10. plateC1Data.m 11. plateC2Data.m ******************************************************************* III. Functions or procedures used in main scripts. They are located in different sub-folders depending on their functionalities. Most of them have comments and quite self explanatory. I therefore do not describe them here. For post-processing, the following routines are used: 1. plotStress1: compute displacements and stresses at nodes of a visualization mesh (Q4 mesh) and export the data to a VTU file. 2. plotStressXIGA: does just the same thing for XIGA problems. 3. crackedMesh : visualize cracked mesh as truly cracked domain (Q4 FEM only) 4. crackedMeshNURBS : the same but for high-order NURBS IV. C_files: contains C implementation of some NURBS algorithms. V. FEM problem files: start with "fem". These files can be found in folder "fem". These files are FEM codes to solve the same problems solved with IGA. Used as reference solution to check IGA implementation. Usually the FEM code reads GMSH mesh files (files with extension *.msh). The *.msh files are created from the GMSH geometry files *.geo. VI. Some stand alone scripts used to generate figures in the paper. These files can be found in folder "examples". 1. circle.m: a full circle by quadratic NURBS curve 2. curves1dWeights.m: effects of weights on NURBS curves 3. deCasteljauExample.m 4. C_files/NURBSplotter.m: plot B-spline basis functions 5. discontinuity1d.m: an example showing the insertion of a knot p+1 times to create a discontinuity 6. hRefinementExample.m: illustrate h-refinement for 1D B-splines VI. Output files (folder "results") Output files include postscript files (*.EPS) and VTU files (*.vtu). VTU files can be processed by Paraview to plot displacements, stresses contours. VII. The NURBS toolbox: in folder "nurbs-geopdes". Some routines in this toolbox are used for p- and k-refinement. VIII. Finite Cell Method: simple implementation of the finite cell method with B-spline basis functions. The corresponding files are in folder "finite-cell-method". IX. Multi-patch IGA code: compatible multi-patch IGA code is resided in folder "@patch2D".
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.