It would be useful to render larger tiles for high-dpi monitors.

One could have a switch depending on the screen size. E.g. when a browser window is larger than 2000 px on either width or height, then the tile size could switch from 256 px tiles to 512 px tiles.

of course, this is also low priority.

When running a website on a different base path than root (e.g. "/qgis-demo"), loading remote projects does not work; it always expects files to be located at "/projects".

Steps to reproduce:

• Set up e.g. a Vue.js app with Vite, configure a base path
• Install and set up qgis-js and @qgis-js/utils
• Use the useProjects composable to load remote projects
• Try to open a remote project

Actual result:

• HTTP 404 Error: http://localhost:3000/projects//.qgz not found

Expected result:

• Projects should be able to be opened also when running on a base path. This could e.g. be configured through an .env variable, or through a setting when using the useProject hook

If a label or a map symbol (e.g. a point marker) ends up being near the edge of a tile, it may get cut off: it only shows in one tile, but not on the neighboring tile.

QGIS server users also have this problem, and they set non-zero tile buffer (e.g. 100 pixels) in project settings:

QGIS server code then takes care of expanding the extent to add the extra buffer, something like this:

int tileBufferPixels = QgsProject::instance()->readNumEntry( QStringLiteral( "WMSTileBuffer" ), QStringLiteral( "/" ), 0 );
double buffer = tileBufferPixels * tileExtentWidthMapUnits / tileWidthPixels;
mapSettings.setExtentBuffer( buffer );

When setting the opacity of a map layer to some value below 1 (e.g. 0.5), the map layer is displayed in a gray-ish color.

Steps to reproduce:

• Open sample page (https://qgis.github.io/qgis-js/)
• Select any of the rendering types (ol XYZ, ol Canvas, or JS)
• Set layer opacity to e.g. 0.5

Actual result:

• Map layer is displayed with a grayish tint.

Expected result:

• When reducing the layer opacity, the layer should maintain its original color quality, becoming more transparent without a gray overlay. The colors should remain true to their original hue, and only in terms of transparency.

Tested both with the sample project "village" and an own QGIS project.

Example:
Opacity = 1:

Opacity < 1:

The attached project uses SVG files for rendering points. The SVG files are in a subfolder and are attached as relatives paths. However, they don't render correctly, but the question mark replacement symbol is shown instead.

This is how they should render:

and this is how they render in qgis-wasm:

Is this an issue with the epxression engine or relativ paths treatment, or the wasm file system?

I have observed that labels get rendered in different sizes depending on the browser used (Chromium 118.0.5993.88 / Firefox 119.0b9) on my system (Ubuntu 22.04, Wayland, Scale 150%).

Also @andreasneumann reported that this test project is rendered with smaller labels than on QGIS Desktop.

Probably we have to set qtFontDpi depending on the devicePixelRatio property.

See also https://doc.qt.io/qt-6/highdpi.html

Many global variables are not supporte, such as:

• @map_scale
• @qgis_platform
• @qgis_os_name
• @qgis_locale
• @qgis_release_name
• @qgis_version

etc.

Tested with writing out the variables with COALESCE in a label.

See also issue #26

When using a QGIS project that contains a cloud-optimized GeoTIFF (COG) on a remote server, it fails with a runtime error:

qgis-js.wasm:0x4792c6f Uncaught (in promise) RuntimeError: memory access out of bounds
    at strlen (qgis-js.wasm:0x4792c6f)
    at std::__2::basic_string<char, std::__2::char_traits<char>, std::__2::allocator<char>>::basic_string[abi:v15006]<std::nullptr_t>(char const*) (qgis-js.wasm:0x932371)
    at CPLString::CPLString(char const*) (qgis-js.wasm:0x23aeac1)
    at cpl::VSICurlHandle::GetFileSizeOrHeaders(bool, bool) (qgis-js.wasm:0x242d5d3)
    at cpl::VSICurlHandle::GetFileSize(bool) (qgis-js.wasm:0x244222a)
    at cpl::VSICurlHandle::Exists(bool) (qgis-js.wasm:0x242f73e)
    at cpl::VSICurlFilesystemHandlerBase::Stat(char const*, stat*, int) (qgis-js.wasm:0x243cb26)
    at VSIStatExL (qgis-js.wasm:0x23e16c8)
    at GDALOpenInfo::GDALOpenInfo(char const*, int, char const* const*) (qgis-js.wasm:0x3d7e2c7)
    at GDALOpenEx (qgis-js.wasm:0x3db2ab9)

We are using our custom implementation of /vsicurl that uses emscripten's fetch API to do the requests.

It is strange that it crashes on some string construction. In the gdal sandbox this works fine (https://github.com/wonder-sk/wasm-gdal-sandbox), but the whole test case there runs in a worker thread because of the blocking networking calls.

Rendering of vector tiles or raster tiles throws a RuntimeError "operation does not support unaligned accesses"

First there are a couple of suspicious warnings from QgsNetworkAccessManager code:

qgis-js.js:1631 qt.core.qobject.connect: QObject::connect(QgsNetworkAccessManager, Unknown): invalid nullptr parameter
qgis-js.js:1631 qt.core.qobject.connect: QObject::connect(QgsNetworkAccessManager, QgsNetworkAccessManager): invalid nullptr
qgis-js.js:1631 qt.core.qobject.connect: QObject::connect(QgsNetworkAccessManager, Unknown): invalid nullptr parameter

In case of raster tile layer: (wms provider with xyz service type)

qgis-js.worker.js:68 RuntimeError: operation does not support unaligned accesses
    at QBasicMutex::lockInternal(int) (qgis-js.wasm:0x1b4a57)
    at QRecursiveMutex::tryLock(int) (qgis-js.wasm:0x1b48f4)
    at QgsNetworkAccessManager::setupDefaultProxyAndCache(Qt::ConnectionType) (qgis-js.wasm:0x581770)
    at QgsNetworkAccessManager::instance(Qt::ConnectionType) (qgis-js.wasm:0x57f546)
    at QgsTileCache::tile(QUrl const&, QImage&) (qgis-js.wasm:0x1884371)
    at QgsWmsProvider::draw(QgsRectangle const&, int, int, QgsRectangle&, double&, QgsRasterBlockFeedback*) (qgis-js.wasm:0x194d54e)
    at QgsWmsProvider::readBlock(int, QgsRectangle const&, int, int, void*, QgsRasterBlockFeedback*) (qgis-js.wasm:0x1953332)
    at QgsRasterDataProvider::block(int, QgsRectangle const&, int, int, QgsRasterBlockFeedback*) (qgis-js.wasm:0xd2108a)
    at non-virtual thunk to QgsRasterDataProvider::block(int, QgsRectangle const&, int, int, QgsRasterBlockFeedback*) (qgis-js.wasm:0xd22314)
    at QgsSingleBandColorDataRenderer::block(int, QgsRectangle const&, int, int, QgsRasterBlockFeedback*) (qgis-js.wasm:0xd86462)

In case of vector tile layer:

qgis-js.worker.js:68 RuntimeError: operation does not support unaligned accesses
    at QBasicMutex::lockInternal(int) (qgis-js.wasm:0x1b4a57)
    at QRecursiveMutex::tryLock(int) (qgis-js.wasm:0x1b48f4)
    at QgsNetworkAccessManager::setupDefaultProxyAndCache(Qt::ConnectionType) (qgis-js.wasm:0x581770)
    at QgsNetworkAccessManager::instance(Qt::ConnectionType) (qgis-js.wasm:0x57f546)
    at QgsTileDownloadManagerWorker::queueUpdated() (qgis-js.wasm:0xa2df28)
    at QtPrivate::QSlotObject<void (QgsTileDownloadManagerWorker::*)(), QtPrivate::List<>, void>::impl(int, QtPrivate::QSlotObjectBase*, QObject*, void**, bool*) (qgis-js.wasm:0xa2dbae)
    at QMetaCallEvent::placeMetaCall(QObject*) (qgis-js.wasm:0xe9091)
    at QObject::event(QEvent*) (qgis-js.wasm:0xebd08)
    at QCoreApplicationPrivate::notify_helper(QObject*, QEvent*) (qgis-js.wasm:0xb65fe)
    at QCoreApplication::notify(QObject*, QEvent*) (qgis-js.wasm:0xb66c5)

When using a QGIS project containing vector tiles layer with a couple of styling rules, it failed to load with this RuntimeError:

qgis-js.wasm:0x56fcf5 Uncaught (in promise) RuntimeError: memory access out of bounds
    at QgsExpressionNodeFunction::QgsExpressionNodeFunction(int, QgsExpressionNode::NodeList*) (qgis-js.wasm:0x56fcf5)
    at exp_parse(expression_parser_context*) (qgis-js.wasm:0x54bcd8)
    at parseExpression(QString const&, QString&, QList<QgsExpression::ParserError>&) (qgis-js.wasm:0x54e28d)
    at QgsExpression::QgsExpression(QString const&) (qgis-js.wasm:0x55145b)
    at QgsProperty::loadVariant(QVariant const&) (qgis-js.wasm:0x9d9bd2)
    at QgsPropertyCollection::loadVariant(QVariant const&, QMap<int, QgsPropertyDefinition> const&) (qgis-js.wasm:0x9dfd97)
    at QgsAbstractPropertyCollection::readXml(QDomElement const&, QMap<int, QgsPropertyDefinition> const&) (qgis-js.wasm:0x9dce89)
    at QgsSymbolLayerUtils::loadSymbolLayer(QDomElement&, QgsReadWriteContext const&) (qgis-js.wasm:0x447961)
    at QgsSymbolLayerUtils::loadSymbol(QDomElement const&, QgsReadWriteContext const&) (qgis-js.wasm:0x4455a1)
    at QgsSymbolLayerUtils::loadSymbols(QDomElement&, QgsReadWriteContext const&) (qgis-js.wasm:0x45d3f7)

QgsExpressionNodeFunction tries to lock a recursive mutex, maybe that's the reason (possibly related to #3 which also fails when locking mutex, but with a different error message)

I am working on an expressJS based web application which is primarily intended to object detection from tiff images. As of now, i am using openseadragon for loading the tiff images inside the application but it takes too much time. So i had a thought of using QGIS interface inside my application for loading the tiff images.
can anyone help with this?

It would be great to have either a "full-screen" mode or a more responsive map view.

On my relatively large screen I only get a small map view - see screenshot below

Alternatively (or in addition) it would be cool to have a "full-screen" button for the map.

Of course this is all "low priority" - but maybe not that hard to implement.

It would be good if there could be feature info support (Identify tool) in the JS-QGIS API.

QGIS has different identify-tools modes:

• Current layer
• Top-Down, Stop at first
• Top-down (and return results for all layers)
• Interactive layer choice

For the web mapping context I think that the middle two versions (Top-Down, Stop at first; Top-down) would make most sense.

It would be great if this could support the QGIS expression engine and HTML for the display of feature info. See the "Display" section in the Layer properties:

That way we can be really flexible, with the mixture of HTML and QGIS expression support.

If the QGIS project uses a WMS / WMTS layer, the project loading will get stuck, with this warning being emitted all the time:

QEventLoop::WaitForMoreEvents is not supported on the main thread without asyncify

This is likely due to the fact that the WMS provider is doing a synchronous blocking GetCapabilities call in the constructor.

The JS interface should support the following functionality:

• listing of all map themes in the project
• switch visibility of layers and styles according to a map theme provided in the API

That way we can add predefined combinations of layer visibilities and/or style combinations without having the user to switch many layers one after the other.

See also QgsMapThemeCollection Class

Steps to reproduce:

• Create a QGIS project with files in sub-folders
• Embed project as a "remote project" with @qgis-js/utils
• Open project in QGIS.js

Actual result:

• files in subdirectories are not processed

Expected result:

• files in subdirectories are processed

Current code: https://github.com/qgis/qgis-js/blob/main/packages/qgis-js-utils/src/fs/RemoteProject.ts

Steps to reproduce:

• Use the loadLocalProject function of @qgis-js/utils
• When the system dialog to select a folder pops up, cancel it

Actual result:

• Error "Uncaught (in promise) DOMException: The user aborted a request." appears
• Rejected promise is not handled

Expected result:

• Promise rejection is handled

Hints:

• qgis-js/packages/qgis-js-utils/src/fs/index.ts

  Line 43 in f711af6

  const loadLocalProject = () =>

• Instead, loadLocalProject could be defined as an async function, like (not tested):

const loadLocalProject = async (): Promise<LocalProject> => {
  try {
    const entries: LocalEntries = await openLocalDirectory({
      recursive: true,
      mode: "read",
    }) as LocalEntries;
    const localProject = new LocalProject(fs, entries);
    return localProject;
  } catch (error) {
    console.error(error);
    throw error;
  }
};

• This would allow to better handle e.g. user abortions in the UI.

When one switches the viewer into full-screen, the background appears black where the background is transparent. A white background would be preferred.

The current MapLayer implementation cannot deal with hierarchical layers (e.g. layer groups).

Instead of doing our own abstraction, we should expose the QGIS internals: QgsLayerTree, QgsLayerTreeModel, QgsLayerTreeNode, QgsLayerTreeGroup, QgsLayerTreeLayer.

Based on this API, one should be able to build a hierarchical layer tree widget.

Here's the test project: test_project.zip

Loading it will emit this error:

Uncaught (in promise) RuntimeError: index out of bounds
    loadProject https://qgis-js.dev.schmuki.io/assets/wasm/qgis-js.js line 6867 > Function:8
    <anonymous> https://qgis-js.dev.schmuki.io/assets/index-5d3bd54b.js:120
    r https://qgis-js.dev.schmuki.io/assets/index-5d3bd54b.js:1
    n https://qgis-js.dev.schmuki.io/assets/index-5d3bd54b.js:1
    async* https://qgis-js.dev.schmuki.io/assets/index-5d3bd54b.js:120
[qgis-js.wasm:5700853:1](https://qgis-js.dev.schmuki.io/assets/wasm/qgis-js.wasm)
    <anonymous> https://qgis-js.dev.schmuki.io/assets/index-5d3bd54b.js:120
    AsyncFunctionThrow self-hosted:856

Importing import { useProjects } from "@qgis-js/utils" only works when the internal Vite configuration is in place. Otherwise Vite will report:

Could not resolve "public/projects"

    node_modules/@qgis-js/utils/dist/qgis-js-utils.js:340:8:
      340 │         "public/projects"
          ╵         ~~~~~~~~~~~~~~~~~

  You can mark the path "public/projects" as external to exclude it from the bundle, which will
  remove this error. You can also add ".catch()" here to handle this failure at run-time instead of
  bundle-time.

This doesn't make sense for external usage. Will have to find another solution or remove this feature from the @qgis-js/utils package.

Reported by @amuedespacher, CC @andreasneumann

It seems like Chrome does some color management which results in slightly dumper (less vivid) colors - when compared to QGIS Desktop and Firefox wasm rendering. One can see at in the blue of the rivers or the orange tones of the polygons above the shaded relief.

This is more an observation and not so much a bug.

@boardend : how to you transfer the rendered images from QGIS wasm to OpenLayers? As a JPEG or PNG encoded file? Can we influence color management in chrome?

If a QGIS project has a layer group set to visible==false, setting the visibility of the individual layers to true in QGIS-js does not render the layers on the map.

Steps to reproduce:

• Create a QGIS project
• Create a layer group with at least one layer, and set it to invisible (via the checkbox in the layer list)
• Open the QGIS project with QGIS-js (e.g. on demo site)
• Try to switch on the layer that is in the group

Actual result:

• Layer is not displayed on the map

Expected result:

• Layer is displayed on the map

Example:
(last two layers should render a choropleth map)

This question came up by @andreasneumann while testing out some own projects. See the notes in the Qt6 WebAssembly reference for context.

A real cool solution would be the proposed Local Font Access API by Google. Qt did some integration, but the API is only available in Chromium based browsers and behind a flag for the time of writing. So probably not the solution for qgis-js.

What we could do is to scan the uploaded folder for any known/supported font file extensions and add those via addApplicationFontFromData to the runtime.