Convert, backup and restore configuration data of devices flashed with Tasmota firmware.
If you like decode-config give it a star or fork it and contribute:
In comparison with the Tasmota build-in "Backup Configuration" / "Restore Configuration" function the decode-config tool:
- uses a human readable and editable JSON-format for backup/restore
- can restore previously backed up and modified JSON-format files
- is able to process any subsets of configuration data
- can convert data from older Tasmota versions (from version v5.10.0) to a newer one and vice versa
- is able to create Tasmota compatible command list for the most available commands
Comparing backup files created by decode-config and .dmp files created by Tasmota "Backup Configuration" / "Restore Configuration":
Configuration | decode-config JSON file | Tasmota *.dmp file |
---|---|---|
encrypted | No | Yes |
readable | Yes | No |
editable | Yes | No |
batch processing | Yes | No |
Backup/Restore subsets | Yes | No |
decode-config is compatible with all Tasmota versions, starting from Tasmota v5.10.0 up to the current one.
Using the latest development version of decode-config is only necessary if you also use the latest development version of Tasmota.
Contents
To use decode-config.py you can install it using Python environment and following the Installation section below.
Alternatively you can download a ready-made binary from Releases to use it without installing Python.
decode-config.py needs an installed Python environment - (see Prerequisite).
After you have installed your Python environment, there are two ways to install deocde-config:
pip install decode-config
The program does not have a graphical user interface (GUI), you have to run it from your OS command line using program arguments - see Usage for more details.
This is only necessary if you want to run decode-config.py from development branch. First install the required modules manually
python -m pip install -r requirements.txt
After that you can use the Phython script decode-config.py as normal program:
decode-config.py
Since decode-config.py is a Python program, it requires an installed Python environment.
Install Python 3.x and Pip:
sudo apt-get install python3 python3-pip
Install Python 3.x as described
Install Python 3.x as described
For an overview start the program without any parameter and you will get a short help:
decode-config.py
This prints a short help:
usage: decode-config.py [-s <filename|host|url>] [-p <password>]
[--fulltopic <topic>] [--cafile <file>]
[--certfile <file>] [--keyfile <file>] [--insecure]
[--keepalive <sec>] [-i <restorefile>]
[-o <backupfile>] [-t json|bin|dmp] [-E] [-e] [-F]
[--json-indent <indent>] [--json-compact]
[--json-show-pw] [--cmnd-indent <indent>]
[--cmnd-groups] [--cmnd-sort]
[--cmnd-use-rule-concat] [--cmnd-use-backlog]
[-c <configfile>] [-S] [-T json|cmnd|command]
[-g <groupname> [<groupname> ...]] [-w] [--dry-run]
[-h] [-H] [-v] [-V]
For advanced help run decode-config with parameter --full--help
or -H
. This will print a Program parameter.
Note
If you're missing older parameters, don't worry, they're still there (see Obsolete parameters).
To get a program result, pass at least a Tasmota source from which you want to read the configuration data.
The Tasmota source determines where the configuration data should be loaded from and saved to. A source can be an offline file or an online Tasmota device accessed via HTTP or indirectly via MQTT.
Use --source
parameter to determine the configuration data source:
Source is a Tasmota configuration file (having extension .dmp
).
Pass the filename direclty or encoded as a file-URL:
decode-config --source tasmota-4281.dmp
decode-config -s file://path/to/tasmota-4281.dmp
Source is an online HTTP connection to a running Tasmota device. To use this source, decode-config must have access to the network on which Tasmota is running, Tasmota Webserver running in admin mode (WebServer 2
) is mandatory.
Specify the hostname, IP o or http-url of the Tasmota device.
An optionally required HTTP password, username and different HTTP port of the device can be specified via URL or separately via --username
, --password
and --port
decode-config --source tasmota-4281
decode-config -s 192.168.10.92
decode-config --source http://tasmota-4281 --password myPaszxwo!z
decode-config --source http://admin:myPaszxwo!z@tasmota-4281:8000
decode-config --source http://admin:myPaszxwo!z@tasmota-4281/cs?
An appended HTTP path (here "/cs?
") is ignored.
Source is a MQTT server and topic where an online Tasmota device is connected to. To use this source, decode-config does not need to have access to the same network that Tasmota is running on, it just needs access to the MQTT server that Tasmota also uses.
Specify the hostname or IP of the MQTT server (possibly also specify username and password for the MQTT server) and the Tasmota MQTT topic. The decode-config connection to MQTT server also allows SSL/TLS connection.
The MQTT username and password must be encoded within the URL (the parameter --password
can not be used for that, it has a different function here).
If the username/password combination for the decode-config MQTT connection is different from the one used by Tasmota itself (Tasmota command MQTTPassword
), the Tasmota MQTT password must be specified via the --password
parameter.
The Tasmota topic can be specfied either within the URL path component or using optional --fulltopic
parameter.
The topic must be the full topic of the Tasmota device without any trailing command or result part. You can use any of the prefixed topic (cmnd, stat or tele topic) or use the placeholder %prefix% for it, example
%prefix%/tasmota-4281
or tele/tasmota-4281
are valid topics
cmnd/tasmota-4281/POWER
or tele/tasmota-4281/STATE
are invalid topics due to the trailing part.
For SSL/TLS connection to MQTT server use mqtts://
URL scheme.
decode-config --source mqtts://mybroker.example.com/%prefx%/tasmota-4281
decode-config --source mqtts://mybroker.example.com:8883/tele/tasmota-4281
decode-config --source mqtts://mqttuser:myBrokerPaszxwo![email protected] --fulltopic tele/tasmota-4281
decode-config --source mqtts://mqttuser:myBrokerPaszxwo![email protected]/tele/tasmota-4281 --password myTasmotaMQTTPaszxwo!z
For own certifications use the parameters --cafile
, --certfile
and --keyfile
. To suppress certification verification use --insecure
.
For none SSL/TLS connection to MQTT server use mqtt://
URL scheme.
decode-config --source mqtt://mybroker.example.com/%prefx%/tasmota-4281
decode-config --source mqtt://mybroker.example.com:1883/tele/tasmota-4281
decode-config --source mqtt://mqttuser:myBrokerPaszxwo![email protected] --fulltopic tele/tasmota-4281
decode-config --source mqtt://mqttuser:myBrokerPaszxwo![email protected]/tele/tasmota-4281 --password myTasmotaMQTTPaszxwo!z
All basic examples above will output a readable configuration in JSON-format, e.g.:
{"altitude": 112, "baudrate": 115200, "blinkcount": 10, "blinktime": 10,...
"ws_width": [1, 3, 5]}
Note
The json names (like"altitude"
or"blinktime"
are internal names from Tasmotas settings.h STRUCTSettings
and are not the same as known from Tasmota web-console commands. However, since most variable names are self-describing, the functional meaning should be given in most cases.
The default JSON output can be formatted for better reading using the --json-indent <n>
parameter:
decode-config --source tasmota-4281 --password "myPaszxwo!z" --json-indent 2
This will print a pretty better readable format and the example above becomes:
{
"altitude": 112,
"baudrate": 115200,
"blinkcount": 10,
"blinktime": 10,
...
"ws_width": [
1,
3,
5
]
}
Because the number of parameters are growing, it would be difficult to enter all these parameters again and again. In that case it is best to use a configuration file that contains your standard parameters and which we then have to specify as the only additional parameter.
Program parameter starting with --
(eg. --username
) can be set into such a configuration file. Simply write each neccessary parameter including possible value without dashes into a text file. For a better identification of this file, extension .conf
is recommended:
Writing all the previous used device parameter in a file, create the text file my.conf
and insert:
[source]
username = admin
password = myPaszxwo!z
[JSON]
json-indent 2
Hint
Group names enclosed in square brackets [ ], like[source]
in the example, are optional and ignored - you can use them to increase readability.
Now we can use it with -c
parameter:
decode-config -c my.conf -s tasmota-4281
Note
For further of parameter file syntax see https://pypi.org/project/ConfigArgParse).
If parameters are specified in more than one place (parameter file and command line), the commandline parameters will overrule the file parameters. This is usefull if you use a basic set of parameters and want to change parameter once without the need to edit your configuration file:
decode-config -c my.conf -s tasmota-4281 --json-indent 4
Here JSON will be output with indent of 4 spaces instead of the 2
set from my.conf
-
To save data from a device or *.dmp file into a backup file, use --backup-file <filename>
.
You can use the following placeholders within filenames:
- @v is replaced by Tasmota Version (backup & restore filenames)
- @d is replaced by Devicename (backup & restore filenames)
- @f is replaced by first Friendlyname1 (backup & restore filenames)
- @h is replaced by the Hostname from configuration data (backup & restore filenames)
Note: This is the static hostname which is configured by the command Hostname, for real hostname from a device use macro the @H) - @H is replaced by the live device hostname (only for http sources, backup & restore filenames)
Note: This can be different to the configured hostname as this can contain also macros).source - @F is replaced by the filename of MQTT request (only for MQTT sources, backup filenames only).
This is usually the filename that Tasmota uses when saving the configuration in the WebUI.
Example:
decode-config -c my.conf -s tasmota-4281 --backup-file Config_@d_@v
This will create a file like Config_Tasmota_13.1.json
(the part Tasmota
and 13.1
will choosen related to your device configuration).
The --backup-file
parameter can be specified multiple times to create different backup with different names and/or different formats at once:
decode-config -c my.conf -s tasmota-4281 -o Config_@d_@v -o [email protected] -o [email protected]
creates three backup files:
Config_Tasmota_13.1.json
using JSON formatBackup_tasmota-4281.json
using JSON formatBackup_tasmota-4281.dmp
using Tasmota configuration file format
Reading back a previously saved backup file, use the --restore-file <filename>
parameter.
To restore the previously save backup file Config_Tasmota_13.1.json
to device tasmota-4281
use:
decode-config -c my.conf -s tasmota-4281 --restore-file Config_Tasmota_13.1
Restore operation also allows placeholders @v, @d, @f, @h or @H like in backup filenames so we can use the same naming as for the backup process:
decode-config -c my.conf -s tasmota-4281 --restore-file Config_@d_@v
Note
Placeholders used in restore filenames only work as long as the underlying data of the device has not changed between backup and restore, since decode-config first read them from the config file or the device to replace it.
If you use the default JSON format for backup files you can also use files containing a subset of configuration data only.
Example: You want to change the data for location (altitude, latitude, longitude) only, create a JSON file location.json
with the content
{
"altitude": 0,
"latitude": 48.85836,
"longitude": 2.294442
}
Set this location for a device:
decode-config -c my.conf -s tasmota-4281 -i location
Hint
Keep the JSON-format valid e.g. when cutting unnecessary content from a given JSON backup file, consider to remove the last comma on same indent level:
Invalid JSON (useless comma in line 3:...2.294442,
):{ "latitude": 48.85836, "longitude": 2.294442, }valid JSON:{ "latitude": 48.85836, "longitude": 2.294442 }
Using subsets of data JSON files are powerfull possibilitiy to create various personal standard configuration files that are identical for all your Tasmota devices and that you can then reuse for newly configure Tasmotas.
File extensions are selected based on the file content and / or the --backup-type
parameter. You don't need to add extensions to your file:
- If you omit the file extensions, one of
.dmp
,.bin
or.json
is used depending on the selected backup type - If you omit the
--backup-type
parameter and the selected file name has one of the standard extensions.dmp
,.bin
or.json
, the backup type is set based on the extension.
If you use your own extensions, deactivate the automatic extension using the --no-extension
parameter and use the optional --backup-type
parameter if neccessary.
Examples:
decode-config --source tasmota-4281 --backup-file tasmota-4281.bin
is identical with
decode-config --source tasmota-4281 --backup-type bin --backup-file tasmota-4281
In both cases the backup filetasmota-4281.bin
is created.decode-config --source tasmota-4281 --restore-file tasmota-4281.json
is identical with
decode-config --source tasmota-4281 --restore-file tasmota-4281
In both cases the backup filetasmota-4281.json
will tried to restore (remember--backup-type json
is the default)- whereas
decode-config --source tasmota-4281 --no-extension --restore-file tasmota-4281
will fail iftasmota-4281
does not exist and
decode-config --source tasmota-4281 --no-extension --backup-file tasmota-4281
will create a json backup file namedtasmota-4281
(without the extension).
To test your parameter append --dry-run
:
decode-config -s tasmota-4281 -i backupfile --dry-run
This runs the complete process but prevent writing any changes to a device or file.
Output to the console screen is the default when calling the program without any backup or restore parameter.
Screen output is suppressed when using backup or restore parameter. In that case you can force screen output with --output
.
The console screen output supports two formats:
- JSON:
This is identical with the backup/restore json file Format but printed on screen standard output. - Tasmota command:
This outputs the most (but not all!) configuration data as Tasmota web-console commands.
The default console output format is JSON (optional you can force JSON backup format using --output-format json
).
Example:
decode-config -c my.conf -s tasmota-4281 --group Wifi
will output data like
{
...
"hostname": "%s-%04d",
"ip_address": [
"0.0.0.0",
"192.168.12.1",
"255.255.255.0",
"192.168.12.1"
],
"ntp_server": [
"ntp.localnet.home",
"ntp2.localnet.home",
"192.168.12.1"
],
"sta_active": 0,
"sta_config": 5,
"sta_pwd": [
"myWlAnPaszxwo!z",
"myWlAnPaszxwo!z2"
],
"sta_ssid": [
"wlan.1",
"my-wlan"
],
"web_password": "myPaszxwo!z",
"webserver": 2
...
}
This also allows direct processing on the command line, e.g. to display all ntp_server
only
decode-config -c my.conf -s tasmota-4281 | jq '.ntp_server'
outputs
[
"ntp.localnet.home",
"ntp2.localnet.home",
"192.168.12.1"
]
Hint
JSON output contains all configuration data as default. To filter the JSON output by functional groups, use the-g
or--group
parameter.
decode-config is able to translate the configuration data to (most all) Tasmota web commands. To output your configuration as Tasmota commands use --output-format command
(or the short form -T cmnd
).
Example:
decode-config -c my.conf -s tasmota-4281 --group Wifi --output-format cmnd
# Wifi:
AP 0
Hostname %s-%04d
IPAddress1 0.0.0.0
IPAddress2 192.168.12.1
IPAddress3 255.255.255.0
IPAddress4 192.168.12.1
NtpServer1 ntp.localnet.home
NtpServer2 ntp2.localnet.home
NtpServer3 192.168.12.1
Password1 myWlAnPaszxwo!z
Password2 myWlAnPaszxwo!z2
SSId1 wlan.1
SSId2 my-wlan
WebPassword myPaszxwo!z
WebServer 2
WifiConfig 5
Note
A very few specific commands are unsupported. These are commands from device-specific groups which are very dependent on the Tasmota program code whose implementation is very complex to keep in sync on Tasmota code changes - see also Generated Tasmota commands.
Because individual Tasmota commands such as SetOption
, WebColor
etc. are often repeat themselves and might want to be used together, commands of the same name can be summarized using the Tasmota Backlog
command. The decode-config parameter --cmnd-use-backlog
enables the use of Tasmota Backlog
.
With the use of --cmnd-use-backlog
our example configuration
# Wifi:
AP 0
Hostname %s-%04d
IPAddress1 0.0.0.0
IPAddress2 192.168.12.1
IPAddress3 255.255.255.0
IPAddress4 192.168.12.1
NtpServer1 ntp.localnet.home
NtpServer2 ntp2.localnet.home
NtpServer3 192.168.12.1
Password1 myWlAnPaszxwo!z
Password2 myWlAnPaszxwo!z2
SSId1 wlan.1
SSId2 my-wlan
WebPassword myPaszxwo!z
WebServer 2
WifiConfig 5
becomes to
# Wifi:
AP 0
Hostname %s-%04d
Backlog IPAddress1 0.0.0.0;IPAddress2 192.168.12.1;IPAddress3 255.255.255.0;IPAddress4 192.168.12.1
Backlog NtpServer1 ntp.localnet.home;NtpServer2 ntp2.localnet.home;NtpServer3 192.168.12.1
Backlog Password1 myWlAnPaszxwo!z;Password2 myWlAnPaszxwo!z2
Backlog SSId1 wlan.1;SSId2 my-wlan
WebPassword myPaszxwo!z
WebServer 2
WifiConfig 5
--cmnd-use-backlog
gets really interesting for SetOptionxx
, WebSensorxx
, Sensorxx
, Memxx
, Gpioxx
and more...
The huge number of Tasmota configuration data can be overstrained and confusing, so the most of the configuration data are grouped into categories.
The following groups are available: Control
, Display
, Domoticz
, Internal
, Knx
, Light
, Management
, Mqtt
, Power
, Rf
, Rules
, Sensor
, Serial
, Setoption
, Shutter
, System
, Timer
, Wifi
, Zigbee
These are similary to the categories on Tasmota Command Documentation.
To filter outputs to a subset of groups, use the -g
or --group
parameter, concatenating the groups you want, e. g.
decode-config -s tasmota-4281 -c my.conf --output-format cmnd --group Main MQTT Management Wifi
Filtering by groups affects the entire output, regardless of whether screen output or backup file.
These examples use an online Tasmota device accessed over HTTP. The hostname of the Tasmota device is tasmota-2f5d44-4281
decode-config -c my.conf -s tasmota-2f5d44-4281 --backup-type dmp --backup-file Config_@d_@v
decode-config -c my.conf -s tasmota-2f5d44-4281 --backup-file Config_@[email protected]
decode-config -c my.conf -s http://tasmota-2f5d44-4281 --restore-file Config_@[email protected]
These examples use an online Tasmota device that is accessed indirectly via MQTT.
In these examples, the MQTT server parameters are the same as those used by Tasmota itself:
- MQTT Server:
mybroker.example.com
- MQTT Username:
mqttuser
- MQTT Password:
myBrokerPaszxwo!z
- Tasmota topic:
tele/tasmota_2F5D44
MQTT server uses a non default port 42110
decode-config -s mqtt://mqttuser:myBrokerPaszxwo![email protected]:42110/tele/tasmota_2F5D44 --backup-file Config_2f5d44-4281.json
Limit the configuration data to the groups Control
, Management
and SetOption
decode-config -s mqtts://mqttuser:myBrokerPaszxwo![email protected] --fulltopic tele/tasmota_2F5D44 --backup-file Config_2f5d44-4281.json -g Control Management SetOption
decode-config -s mqtts://mqttuser:myBrokerPaszxwo![email protected]/tele/tasmota_2F5D44 --restore-file Config_2f5d44-4281.json
Linux
for device in tasmota1 tasmota2 tasmota3; do ./decode-config -c my.conf -s $device -o Config_@d_@v
under Windows
for device in (tasmota1 tasmota2 tasmota3) do decode-config -c my.conf -s %device -o Config_@d_@v
will produce JSON configuration files for host tasmota1, tasmota2 and tasmota3 using friendly name and Tasmota firmware version for backup filenames.
decode-config handles the following three file formats for backup and restore:
This is the original format used by Tasmota (created via the Tasmota web interface "Configuration" / "Backup Configuration" and can be read in with "Configuration" / "Restore Configuration". The format is binary encrypted.
This file format can be created by decode-config using the backup function (--backup-file <filename>
) with the additional parameter --backup-type dmp
.
This format uses the JSON notation and contains the complete configuration data in plain text, human readable and editable.
The .json format can be created by decode-config using the backup function (--backup-file <filename>
) (for better identification you can append the optional parameter --backup-type json
, but that's optional as json is the default backup format).
In contrast to the other two binary formats .dmp and .bin, this type of format also allows the partial modification of configurations.
Note
The keys used within the JSON file are based on the variable names of Tasmota source code in settings.h so they do not have the same naming as known for Tasmota web commands. However, since the variable names are self-explanatory, there should be no difficulties in assigning the functionality of the variables.
This format is binary with the same structure as the .dmp format. The differences to .dmp are:
- .bin is decrypted
- .bin has 4 additional bytes at the end of the file
The .bin format can be created by decode-config using the backup function (--backup-file <filename>
) with the additional parameter --backup-type bin
.
This format is actually only used to view the configuration data directly in binary form without conversion.
It is hardly possible to change the binary data, since a checksum is formed over the data and this would have to be calculated and adjusted in case of any change.
For better reading each short written parameter using a single dash -
has a corresponding long version with two dashes --
, eg. --source
for -s
.
Note: Not even all double dash --
parameter has a corresponding single dash one -
but each single dash variant has a double dash equivalent.
A short list of possible program args is displayed using -h
or --help
.
For advanced help use parameter -H
or --full-help
.
usage: decode-config.py [-s <filename|host|url>] [-p <password>]
[--fulltopic <topic>] [--cafile <file>]
[--certfile <file>] [--keyfile <file>] [--insecure]
[--keepalive <sec>] [-i <restorefile>]
[-o <backupfile>] [-t json|bin|dmp] [-E] [-e] [-F]
[--json-indent <indent>] [--json-compact]
[--json-show-pw] [--cmnd-indent <indent>]
[--cmnd-groups] [--cmnd-sort]
[--cmnd-use-rule-concat] [--cmnd-use-backlog]
[-c <configfile>] [-S] [-T json|cmnd|command]
[-g <groupname> [<groupname> ...]] [-w] [--dry-run]
[-h] [-H] [-v] [-V]
Backup/Restore Tasmota configuration data.
Source:
Read/Write Tasmota configuration from/to
-s, --source <filename|host|url>
source used for the Tasmota configuration (default:
None). Specify source type, path, file, user,
password, hostname, port and topic at once as an
URL. The URL must be in the form 'scheme://[usernam
e[:password]@]host[:port][/topic]|pathfile'where
scheme is 'file' for a tasmota binary config file,
'http' for a Tasmota HTTP web connection and
'mqtt(s)' for Tasmota MQTT transport ('mqtts' uses
a TLS connection to MQTT server)
-p, --password <password>
Web server password on HTTP source (set by Tasmota
'WebPassword' command), MQTT server password in
MQTT source (set by Tasmota 'MqttPassword' command)
(default: None)
MQTT:
MQTT transport settings
--fulltopic <topic> Optional MQTT transport fulltopic used for
accessing Tasmota device (default: )
--cafile <file> Enables SSL/TLS connection: path to a or filename
of the Certificate Authority certificate files that
are to be treated as trusted by this client
(default None)
--certfile <file> Enables SSL/TLS connection: filename of a PEM
encoded client certificate file (default None)
--keyfile <file> Enables SSL/TLS connection: filename of a PEM
encoded client private key file (default None)
--insecure suppress verification of the MQTT server hostname
in the server certificate (default False)
--keepalive <sec> keepalive timeout for the client (default 60)
Backup/Restore:
Backup & restore specification
-i, --restore-file <restorefile>
file to restore configuration from (default: None).
Replacements: @v=firmware version from config,
@d=devicename, @f=friendlyname1, @h=hostname from
config, @H=device hostname (http source only)
-o, --backup-file <backupfile>
file to backup configuration to, can be specified
multiple times (default: None). Replacements:
@v=firmware version from config, @d=devicename,
@f=friendlyname1, @h=hostname from config,
@H=device hostname (http source only),
@F=configuration filename from MQTT request (mqtt
source only)
-t, --backup-type json|bin|dmp
backup filetype (default: 'json')
-E, --extension append filetype extension for -i and -o filename
(default)
-e, --no-extension do not append filetype extension, use -i and -o
filename as passed
-F, --force-restore force restore even configuration is identical
JSON output:
JSON format specification. To revert an option, insert "dont" or "no"
after "json", e.g. --json-no-indent, --json-dont-show-pw
--json-indent <indent>
pretty-printed JSON output using indent level
(default: 'None'). -1 disables indent.
--json-compact compact JSON output by eliminate whitespace
--json-show-pw unhide passwords (default)
Tasmota command output:
Tasmota command output format specification. To revert an option,
insert "dont" or "no" after "cmnd", e.g. --cmnd-no-indent, --cmnd-dont-
sort
--cmnd-indent <indent>
Tasmota command grouping indent level (default:
'2'). 0 disables indent
--cmnd-groups group Tasmota commands (default)
--cmnd-sort sort Tasmota commands (default)
--cmnd-use-rule-concat
use rule concatenation with + for Tasmota 'Rule'
command
--cmnd-use-backlog use 'Backlog' for Tasmota commands as much as
possible
Common:
Optional arguments
-c, --config <configfile>
program config file - can be used to set default
command parameters (default: None)
-S, --output display output regardsless of backup/restore usage
(default do not output on backup or restore usage)
-T, --output-format json|cmnd|command
display output format (default: 'json')
-g, --group <groupname>
limit data processing to command groups ['Control',
'Display', 'Domoticz', 'Hdmi', 'Internal', 'Knx',
'Light', 'Management', 'Mqtt', 'Power', 'Rf',
'Rules', 'Sensor', 'Serial', 'Setoption',
'Settings', 'Shutter', 'System', 'Telegram',
'Timer', 'Wifi', 'Zigbee'] (default no filter)
-w, --ignore-warnings
do not exit on warnings. Not recommended, used by
your own responsibility!
--dry-run test program without changing configuration data on
device or file
Info:
Extra information
-h, --help show usage help message and exit
-H, --full-help show full help message and exit
-v, --verbose produce more output about what the program does
-V, --version show program version (and config version if
--source is given) and exit
The arguments -s <filename|host|url> must be given.
Args that start with '--' (eg. -s) can also be set in a config file
(specified via -c). Config file syntax allows: key=value, flag=true,
stuff=[a,b,c] (for details, see syntax at https://goo.gl/R74nmi). If an arg
is specified in more than one place, then commandline values override
config file values which override defaults.
Note
If you miss parameters here that are already in use, don't worry, they are still there.
For details see Obsolete parameters
- Filename replacement macros @h and @H:
- @h
The @h replacement macro uses the hostname configured with the Tasomta Wifi
Hostname <host>
command (defaults to%s-%04d
). It will not use the network hostname of your device because this is not available when working with files only (e.g.--source <filename>
as source). To prevent having an useless % in your filename, @h will not replaced by hostname if this contains '%' characters. - @H
If you want to use the network hostname within your filename, use the @H replacement macro instead - but be aware this will only replaced if you are using a network device as source (
<hostname>
,<ip>
,<url>
); it will not work when using a file as source (<filename>
)
- @h
The @h replacement macro uses the hostname configured with the Tasomta Wifi
The parameters listed here continue to work and are supported, but are no longer listed in the parameter list:
The following source selection parameters are completely replaced by a single used -s
or --source
parameter; use -s
or --source
with a http-url:
-f
,--file
,--tasmota-file
,tasmotafile
<filename>
file used for the Tasmota configuration (default: None)'-d
,--device
,--host
<host|url>
hostname, IP-address or url used for the Tasmota configuration (default: None)-P
,--port
<port>
TCP/IP port number to use for the host connection (default: 80)-u
,--username
<username>
host HTTP access username (default: admin)
--json-unhide-pw
same as--json-show-pw
--json-hide-pw
same as--json-dont-show-pw
--json-sort
sorts JSON output (this is the default)--json-unsort
prevents JSON sorting
Details below shows the Tasmota command generated by decode-config:
- Supported
These commands will be generated using parameter--output-format cmnd
. - Ad hoc
These Tasmota commands are used for immediate action and do not change settings - so these cannot be created. - Unsupported
These Tasmota commands are unsupported and not implemented in decode-config
Notes
1Sensor60 13
sets the latitude/longitude, useLatitude
andLogitude
command instead.
2 ESP32 only
-
0 - successful:
The process has successful finished -
1 = restore skipped:
Unchanged data, restore not executed -
2 = program argument error:
Wrong program parameter used (data source missing) -
3 = file not found
-
4 = data size mismatch:
The data size read from source does not match the excpected size -
5 = data CRC error:
The read data contains wrong CRC -
6 = unsupported configuration version:
The source data contains data from an unsupported (Sonoff-)Tasmota version -
7 = configuration file read error:
There was an error during read of configuration source file -
8 = JSON file decoding error:
There was an error within the read JSON file -
9 = restore file data error:
Error occured by writing new binary data -
10 = device data download error:
Source device connected but configuration data could not be downloaded (WebServer missing, disabled) -
11 = device data upload error:
Source device connected but configuration data could not be uploaded (WebServer missing, disabled, connection lost...) -
12 = invalid configuration data:
The configuration data source contains invalid basic data (wrong platform id...) -
20 = python module missing:
A neccessary python library module is missing -
21 = internal error:
An unexpected internal error occured -
22 = HTTP connection error:
Source device HTTP connection lost or unavailable -
23 = MQTT connection error:
MQTT server connection error -
24... = python library exit code:
An unexpected internal library error occured -
4xx/5xx = HTTP errors