postwait / leo Goto Github PK

Mbit/s or Kbit/s would be helpful in addition to the current counters

• Percent memory used
• Alerts generated if we are paging out to disk over some threshold

We are about a 50:50 ratio of SmartOS/Ubuntu, so would love basic metrics for SmartOS as well. May be able to contribute here if we get some pointers on where to begin work extending Leo.

Would love to see the following for default disk checks:

• Percent used
• Automatic creation of alerts for disks past a certain usage threshold
• Average I/O latency in milliseconds

Hello,

I'm encountering an error when attempting to run leo to configure a nad install on smartos. We've installed nad and it appears to be running correctly as we can connect to it via our circonus account and see all relevant information. See below for information related to the error.

Environment: smartos

nad installed via:

1. "wget"
2. "unzip"
3. "gmake install-illumos"

leo installed via:

1. "wget"
2. "unzip"
3. "npm install"

Error:
[root@example /home/admin/circonus/leo-master]# bin/circonus-setup

events.js:85
throw er; // Unhandled 'error' event
^
Error: spawn /opt/circonus/etc/node-agent.d/cpu.sh ENOENT
at exports._errnoException (util.js:746:11)
at Process.ChildProcess._handle.onexit (child_process.js:1046:32)
at child_process.js:1137:20
at process._tickCallback (node.js:355:11)

Editing "components/nad.js" and re-running, I can output the paths and see its looking for:

/opt/circonus/etc/node-agent.d/cpu.sh
/opt/circonus/etc/node-agent.d/disk.sh
/opt/circonus/etc/node-agent.d/fs.elf
/opt/circonus/etc/node-agent.d/if.sh
/opt/circonus/etc/node-agent.d/vm.sh

Looking at the install location for nad I can see "cpu.sh", "disk.sh" & "vm.sh" do not exist here:

[root@example /home/admin/circonus/leo-master]# ll /opt/circonus/etc/node-agent.d/
total 25
lrwxrwxrwx 1 root root 18 Aug 5 15:52 aggcpu.elf -> illumos/aggcpu.elf*
drwxr-xr-x 2 root root 13 Jul 29 18:15 common/
lrwxrwxrwx 1 root root 15 Aug 5 15:52 cpu.elf -> illumos/cpu.elf*
drwxr-xr-x 2 root root 3 Jul 29 18:15 example/
drwxr-xr-x 3 root root 9 Jul 29 18:15 freebsd/
lrwxrwxrwx 1 root root 14 Aug 5 15:52 fs.elf -> illumos/fs.elf*
drwxr-xr-x 2 root root 3 Jul 29 18:15 haproxy/
lrwxrwxrwx 1 root root 13 Aug 5 15:52 if.sh -> illumos/if.sh*
drwxr-xr-x 4 root root 21 Aug 5 15:52 illumos/
drwxr-xr-x 3 root root 11 Jul 29 18:15 linux/
drwxr-xr-x 2 root root 5 Jul 29 18:15 ohai/
drwxr-xr-x 3 root root 7 Jul 29 18:15 openbsd/
drwxr-xr-x 2 root root 3 Jul 29 18:15 pf/
drwxr-xr-x 2 root root 3 Jul 29 18:15 postgresql/
lrwxrwxrwx 1 root root 17 Aug 5 15:52 sdinfo.sh -> illumos/sdinfo.sh*
drwxr-xr-x 2 root root 4 Jul 29 18:15 smartos/
lrwxrwxrwx 1 root root 14 Aug 5 15:52 smf.sh -> illumos/smf.sh*
lrwxrwxrwx 1 root root 14 Aug 5 15:52 tcp.sh -> illumos/tcp.sh*
lrwxrwxrwx 1 root root 14 Aug 5 15:52 udp.sh -> illumos/udp.sh*
lrwxrwxrwx 1 root root 17 Aug 5 15:52 vminfo.sh -> illumos/vminfo.sh*
lrwxrwxrwx 1 root root 15 Aug 5 15:52 vnic.sh -> illumos/vnic.sh*
drwxr-xr-x 3 root root 3 Jul 29 18:15 windows/
lrwxrwxrwx 1 root root 18 Aug 5 15:52 zfsinfo.sh -> illumos/zfsinfo.sh*
lrwxrwxrwx 1 root root 19 Aug 5 15:52 zone_vfs.sh -> illumos/zone_vfs.sh*
lrwxrwxrwx 1 root root 15 Aug 5 15:52 zpool.sh -> common/zpool.sh*
lrwxrwxrwx 1 root root 19 Aug 5 15:52 zpoolio.elf -> illumos/zpoolio.elf*

Do I need to modify the config at "components/nad.js" to something specific to smartos? If so what would need to be changed?

Thanks

this makes it much easier to set an alert threshold if desired