Hello, Firstly thank you for the amazing repository.
Is it possible to extend the existing UNH-RVAT case to a twin rotor case (not two turbines side by side), which means moving the center of rotor by some distance 1.2D using RAS? Is there any tutorials/cases available regarding twin rotors that i can refer to?

Thanks in Advance.

Right now, time step is kept constant.

Probably should be done with Smagorinsky LES model and RANS, but start with RANS.

Strangely this is happening around 0.4 seconds.

Ideas

• Turn off flow curvature model
• epsilon equal to the chord length
• Try different foil data
• Turn off dynamic stall
• Switch schemes back to stable ones
• Set time step back to 0.01 seconds
• Remove cm values from foil data
• Vary number of elements

Insteady of using Git to checkout the latest version, we could read in the initial file and re-write this to reset. This would allow for experimentation with non-committed parameters. Then again, this will sort of hurt the "auto-documenting" nature of using a Git repo.

Should at least have these options:

• --no-show
• --save
• --all -- creates all figures