ovh / overthebox-feeds Goto Github PK
View Code? Open in Web Editor NEWOverTheBox - LEDE/OpenWrt feed
License: GNU General Public License v3.0
OverTheBox - LEDE/OpenWrt feed
License: GNU General Public License v3.0
Someone told me he wants to see who's doing traffic and on which remote IP, something like ntop but in the browser
OTB works, but aggregation is broken with glorytun.
If we plan to support this kind of scenario we need to find a generic solution (ip alias, ns, ...).
i just love the great job you've done, and I want to use otb from China, is there any plan to provide your service to us? I mean just use your architecture not your cable service?
thanks
Currently OTB can not be used in networks that block foreign DNS servers and outgoing traffic on unusual ports like 4443 and 5006 and maybe others.
The old Iptraf has a bug with tun0 interfaces (it simply crashes), and it should be replaced by iptraf-ng, which is maintained.
Hi,
I have two WAN paths configured on a remote-side over-the-box load balancing nicely on a per-destination basis but the tun0 is down and I can't see where to configure the IP address of the other side of the tunnel in order to complete the MWAN setup and and get MPTCP running, I suspect this is also possible with a transparent SOCKs proxy but can't see how to correctly configure that either. I have a hub-side over-the-box with a public IP in a data-centre as well doing nothing at the moment, the idea would be to use this for the fast aggregated internet connection and terminate the remote-side node (only the remote-side has multiple WAN paths that need load balancing).
If anyone an point me in the right direction or towards any documentation that would be much appreciated. I haven't managed to find anything yet by searching the web.
Kind Regards,
Jonathan
We've removed the hotplug conntrack here: #456
It might break VoIP stuff, we need to test it carefully.
Hi i used the .ova for openwrt and i used the command
sudo dd if=openwrt-x86-64-combined-ext4.img of=/dev/mmcxxx
and at boot i have an message
Waiting for root device PARTUUID=c0b6e087-02...
http://puu.sh/nQl3k/952a0eee85.png
i tried almost everything but no progress :/
Bonjour,
Est il possible d'installer OverTheBox dans une VM hyper-v ?
Luci does not display factory reset button.
MTD method looks deprecated with LEDE
Hello,
We want to install overthebox on a Vmware Infrastructure with ESXi 5.5.
We use the last image http://downloads.overthebox.ovh/trunk/x86/64/openwrt-x86-64-combined-ext4.img.gz
The VM boot without problem but it does not get DHCP lease. We have a Windows VM on the same ESXi, in the same network et this Windows VM get DHCP lease without problem.
We try another method : installation of overthebox on Vmware Workstation with the netword card bridged on a network with the box, overthebox gets DHCP lease and working. We shutdown the VM, we take files (vmx, vmdk ...) and we use Vmware Converter to convert the VM Workstation to VM of own Vmware Infrastructure ESXi 5.5. The converted Overthebox VM boot without problem, but it does not get DHCP lease.
Do you know a issue of this problem of getting DHCP lease ? Do you know a manuel method to initialize the overthebox VM on a Vmware Infrastructure with ESXi 5.5 ?
Thank you for your feedback.
After being migrated, my qos is not translated from sqm to otb qos
An explicit run of
/usr/lib/qos/run.sh $interface
is needed
.VirtualBox v5.0.10.r104061
OS: Windows 10 Pro
I have created a new Box with: 2GB RAM and Network: NAT and Intern Network
Openwrt ist booting but it hang on [9.330037] tsc: Refined TSC clocksource calibration: 3292.253 MHz
Any ideas?
Status: 500 Internal Server Error /usr/lib/lua/luci/dispatcher.lua:452: Failed to execute template dispatcher target for entry '/admin/overthebox/overview'. The called action terminated with an exception: /usr/lib/lua/luci/template.lua:97: Failed to execute template 'overthebox/index'. A runtime error occured: /usr/lib/lua/luci/template.lua:97: Failed to execute template 'header'. A runtime error occured: /usr/lib/lua/luci/template.lua:97: Failed to execute template 'themes/ovh/header'. A runtime error occured: /usr/lib/lua/luci/ccache.lua:70: error loading module 'overthebox' from file '/usr/lib/lua/overthebox.lua': /usr/lib/lua/overthebox.lua:1049: unexpected symbol near '!' stack traceback: [C]: in function 'assert' /usr/lib/lua/luci/dispatcher.lua:452: in function 'dispatch' /usr/lib/lua/luci/dispatcher.lua:141: in function
I want to use OTB connecting to my own server, would please share the experiences ?
thanks
Bonjour,
J'ai une connexion par la fibre avec un débit de 800/40
J'aurai souhaiter savoir si la limitation de la bande passante est lié au matériel ou es ce possible de construire son propre routeur pour atteindre des pics au delà des 600 Mb
Es ce lié aux limitations du cryptage du processeur ?
Merci d'avance pour vos retours.
Vincent
provisionning.overthebox.net
1- When changing dscp setting via interface, the related iptables setting is duplicated, even when restarting/reloading /etc/init.d/dscp manually.
2- Also on dscp modification, TC queue is missing on one of my 2 interfaces, fixed by reloading dscp.
3- ACK iptables of length < 89 byte, sucks and it ruin the default queueing for TCP.
Hello,
I tried to convert the vdi image for OverTheBox into vmdk to use it with ESXI 6.0 but it never start, i always get a kernel panic.I tired modifying the type of lan card with the three esxi offer, still the same problem. I'm just starting with ESXI and OverTheBox so i might be doing something wrong
here is a screen capture of the error i get
i used the "openwrt-x86-64-combined-ext4.vdi" image.
I was wondering if the problem isn't ESXI 6.0 cause apparently someone were able to make it work on ESXI 5.5
Thanks in advance for ur help
When I create a port using Wifi scan for tethering,
I get by default a new symbolic interface "wwan" linked to "wlan0" real ethernet device
Tracking is launch like this:
lua /usr/sbin/mwan3track -i wwan -d wlan0 ...
but it tries to operate with symbolic interface instead of the device itself.
So link never commes UP.
If I force symbolic name to wlan0 be equal to device name, everything is ok
Missing some js lib
Im only getting 100 kB/s per link (3 DSL Lines) opposed to 1800 kB/s per link on ubuntu using the same mptcp setup...
In track.lua, the case where a request is received instead of the ping response is not correctly processed.
"other error : 8". Type 8 is a "echo-request" not a response.
If a burst of ping is sent from internet to OTB public IP, Tun0 can be seen KO
Jean Labrousse
There is a race condition while restarting the glorytun-udp service
procd does not wait for the process to be stopped when restarting the service
The remote access on port 443 is not working the current master.
Logs:
I do : remoteAccessPrepare
Failed to do remoteAccessPrepare
Got error: error creating luci user
It happens on master, if the user is on the local web interface
Wed Jun 28 10:51:51 2017 daemon.err uhttpd[2111]: cat: can't open '/var/etc/dnsmasq.conf': No such file or directory
There's a script in the crontab, running every 2 minutes, which does not even exists
root@LEDE:/# crontab -l
*/2 * * * * /etc/uci-defaults/otb-recovery.defaults > /dev/null 2>&1
00 */2 * * * { /usr/bin/overthebox_checkup; } &>/dev/null
00 */6 * * * { /usr/bin/overthebox_emergency_action cron; } &>/dev/null
00 02 * * 0 { /usr/bin/overthebox_download_recovery cron; } &>/dev/nullh
root@LEDE:/# ls /etc/uci-defaults/otb-recovery.defaults
ls: /etc/uci-defaults/otb-recovery.defaults: No such file or directory
De temps en temps l'adresse le l'OTB prend celle de mon ADSL.
J'ai fini par trouver une piste dans les iptables.
Quand il y a le problème la règle 'mwan3_hook' n'est plus la prèmière.
Ici j'ai 3 fichiers:
Je teste avec "wget -O - -q http://ifconfig.ovh"
Le problème arrive presque à chaque fois si je place les interfaces dans l'ordre if2,eth1,tun0,xtun0 dans la conf mwan3.
Ceci pour que les interfaces réels montent avant les tunnels.
Alors un simple 'restart mwan3' provoque le PB.
La règle 'mwan3_hook' est ajoutés par /etc/hotplug.d/iface/15-mwan3
Les règles 'QOS_MARK' sont ajoutées par /usr/lib/sqm/otb.qos
A noté que l'auteur de simple.qos a déjà commenté la ligne.
Si ça peut vous aider...
Jean Labrousse
iptables.good:-A OUTPUT -j mwan3_hook
iptables.good:-A OUTPUT -o if2 -g QOS_MARK_if2
iptables.good:-A OUTPUT -o eth1 -g QOS_MARK_eth1
iptables.good:-A OUTPUT -j delegate_output
iptables.bad:-A OUTPUT -o if2 -g QOS_MARK_if2
iptables.bad:-A OUTPUT -j mwan3_hook
iptables.bad:-A OUTPUT -o eth1 -g QOS_MARK_eth1
iptables.bad:-A OUTPUT -j delegate_output
iptables.cor:-A OUTPUT -j mwan3_hook
iptables.cor:-A OUTPUT -o if2 -g QOS_MARK_if2
iptables.cor:-A OUTPUT -o eth1 -g QOS_MARK_eth1
iptables.cor:-A OUTPUT -j delegate_output
In luci, with the page cgi-bin/luci//admin/network/network
open
root@OverTheBox:/# uci show firewall.wan
firewall.wan=zone
firewall.wan.name='wan'
firewall.wan.input='REJECT'
firewall.wan.output='ACCEPT'
firewall.wan.forward='REJECT'
firewall.wan.masq='1'
firewall.wan.mtu_fix='1'
firewall.wan.network='if0' 'tun0'
root@OverTheBox:/# otb-action-configure
root@OverTheBox:/# uci show firewall.wan
firewall.wan=zone
firewall.wan.name='wan'
firewall.wan.input='REJECT'
firewall.wan.output='ACCEPT'
firewall.wan.forward='REJECT'
firewall.wan.masq='1'
firewall.wan.mtu_fix='1'
firewall.wan.network='if0' 'tun0' 'tun0'
Hi there
I found overthebox is very cool, want to use it from China. is there anyway to bypass your activation mechanism ?
thanks
causes a js error
Uncaught SyntaxError: Unexpected token =
It seems to happen in all Pre ES2015/ES6 browsers
A simple fix would be tu manually assign the default values for the function's params :
bit = bit || false;
binary = binary || false;
How to activate it ? I can not register it from China mainland
Bonjour,
Après avoir suivi les indications du paragraphe "Compile from source" pour installer le service overthebox sur un hôte ubuntu x86, et après avoir préparer les requis et lancer la compilation, j'obtiens ces messages d'erreur :
./overthebox-openwrt/include/toplevel.mk:65: recipe for target 'prepare-tmpinfo' failed
make[1]: *** [prepare-tmpinfo] Error 25
./overthebox-openwrt/include/toplevel.mk:177 : la recette pour la cible « world » a échouée
make: *** [world] Erreur 2
Pouvez-vous m'aider ?
Removed in #461
We should find a better solution
Thu Jun 29 14:53:52 2017 daemon.err uhttpd[1694]: cat: can't open '/tmp/wanip': No such file or directory
There is no data showing on realtime traffic. I have no idea how to make it work. My modem is in bridge mode.
Hello,
It seems if the request to /cgi-bin/luci/admin/overthebox/lan_traffic_data
takes too much time, the displayed bandwidth usage will be too high.
I think this is because the value is divided by period
here even though it might have taken more time.
Wouldn't it be possible to calculate the kb/s server-side and return the computed value?
Regards,
We should at least set a wait time between retries if there is an error on provisionning calls ?
When I try to compile tracebox, it fails because it needs a lua on the host side:
checking whether to enable assertions... yes
checking for lua... no
checking for lua5.2... no
checking for lua5.1... no
checking for lua50... no
checking if : is a Lua interpreter... yes
configure: error: cannot find suitable Lua interpreter
I think you need to modify the openwrt package to add that requirement.
Salut a tous,
j'ai créé une machine virtuelle sous ESXI 6.0 avec l'image : http://downloads.overthebox.ovh/develop/x86/64/openwrt-x86-64-combined-ext4.vmdk
et l'image http://downloads.overthebox.ovh/trunk/x86/64/openwrt-x86-64-combined-ext4.vmdk
mais rien n'y fait, ca ne veut pas aller plus loin.
Niveau config, j'ai mis 2vCore, 2go de RAM pour la VM. Je travail sur un Z6000 ProLiant SL160z G6 de chez HP avec 2x Xéon E5506 et 36go de RAM. Un HDD de 250go et un second de 1TO. Le serveur passe par 2 switch 1000Mbps avant d'arriver à la Freebox. J'pense avoir fait la tour de la config.
J'ai également éssayé d'installer via un live CD d'ubuntu 16 et en téléchargeant directement l'image sur le disque, mais la il ne va pas plus loin que : waiting for root device
Auriez vous une piste? Mon matériel qui n'est pas compatible?
Merci.
On the home page, the boxes of your interfaces display the public IP of each interface. If the public IP change without disconnecting the interface (like when ADSL lines resets), the public IP isn't updated. Even though the MPTCP tunnel is reset.
When you first setup the OTB using the latest LEDE version, dnsmasq check if there is another DCHP server on the lan. If a DHCP server is found, the dhcp-range configuration won't be generated by the dnsmasq.init
file.
The right way to fix it is to use the force
option on the dhcp range configuration. With this setup, dnsmasq won't check for a running DHCP and add the range to the configuration.
Documentation:
https://lede-project.org/docs/user-guide/dhcp_configuration#dhcp_pools
Steps to reproduce the bug:
modem1
having its dhcp server enabledmodem1
's DHCP server and create its own lan network on the same range, but will detect the running DHCP server and no use the lan rangemodem1
We've seen network loops in the past for clients using a wan in bridge mode. The loop came from the nat we're doing for shadowsocks.
We fixed the problem by adding the IP to the mwan bypass list, now that mwan is gone, we still need to handle this case.
Linked to #590
Hi,
Somehow the OTB FS got corrupted so I had to flash it, I used the latest image from 2 days ago at http://downloads.overthebox.ovh/trunk/x86/64/openwrt-x86-64-embedded-ext4.img.gz
, which installed 0.2-15 according to the overview page. Since then, there is an issue with odhcpd : whenever a change is made to any interface, I have to uncheck "Disable DHCP on this interface" everytime on eth0, otherwise the OTB will not reply to any DHCP request from the LAN network. There are several repeated entries for DHCP on the eth0 "General setup" page. This wasn't happening before flashing.
http://overthebox.ovh/cgi-bin/luci/admin/overthebox/overview
display 404 not found
http://192.168.100.1/cgi-bin/luci/admin/overthebox/overview
correctly display overview
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.