Add firmware manager capabilities to the openCONFIGURATOR eclipse plugin. This shall include version handling and providing the most current firmware within the configuration build.

The network view should offer copy paste functionality for complete CNs. Ideally there should be a dialog to give the node ID as an input for the copied node.

1. Open Eclipse. Open TestWeidmuller project.
2. Remove first modular device (DO).
3. In console appear error that module not support manual addressing.
4. Try to add the same module to project (in attach).
   Cur. beh.: error appear Subobject 0x3100/0x2 already exists on node "1". Module isn't added.
   Exp. beh.: no errors, module should be added.
5. When trying to add module second time all ok. Another try, problem persist.

TestWeidmuller.zip

Moving the last module on a Weidmueller BC upwards causes the plugin to calculate the wrong address for the moved module. The project file is corrupted and the respective XDC configuration file is deleted by the OC.

ModularPluginTest.zip

Create an overview page which displays the most important information of a CN. The view shall include the most important properties and the current PDO data size.

00000230_UR20_4DI_N.zip

There are some inconsistencies with the address handling within the OC plugin if there is a mismatch between the module addressing defined in the modular head and the modular child device.

HEAD CHILD

manual manual -> Address configurable within OC -> works fine

position position -> Address is not configurable within OC -> Works fine

manual position -> No warning at creation of module.
-> Address is not configurable within OC.
-> Library warning exists.

position manual -> Warning at creation of module that only addressing position is allowed.
-> Address is not configurable within OC.

If the user chooses the parameter the focus of the cursor should be in the actual value field of the properties to make manipulation easier.

Add support for MN XDD which includes modular interfaces.

Steps to reproduce the issue:

1. Use the project attached.
2. Move the first module down. -> OK
3. Add another UR20 Module. -> This fails because the address is not correctly calculate in the wizard.
   See screenshot:
   

Project:
TestWeidmuller.zip

The parameter view and the od view shall be separated so that they can be views alongside.

The handling of multiple interfaces with the same module type does not work properly in openCONFIGURATOR. Please find the attached XDDs which highlight the problem.

ModularDeviceXDD.zip

Let the customer define a separate output path for every configuration file created by the plugin.

[2016-11-07 15:22:04] [ERROR] [ModularPluginTest] The XDD/XDC file of node UR20_BCPL (1) is not available.

This error message does not state that the module XDC is not present.

OpenConfigurator is build against a defined version of Boost under a Linux OS. We need to provide a proper solution for a variable Boost setup. This issue is reported multiple times on SourceForge: https://sourceforge.net/p/openconf/discussion/help/thread/30ad0304/?limit=25

We need to provide at least a guide within the user manual that is applicable on any Linux OS.

Validate the XAP.xml against the attached schema.
xap_schema.zip

Currently only one sub device layer is supported within the OC plugin. Add functionality for multiple sub device layers.

Add a view to the openCONFIGRATOR that displays the PI variables of the POWERLINK network. Show sorted input and output variables.

Enable cross traffic between RMNs.