It hangs out at Starting Kernel..... about oref0 HOT 8 OPEN

`arget:blank
Partitioning already done...
Flashing already done...
GADGET DRIVER: usb_dnl_dfu
reading vmlinuz
4841888 bytes read in 159 ms (29 MiB/s)
Valid Boot Flag
Setup Size = 0x00003c00
Magic signature found
Using boot protocol version 2.0c
Linux kernel version 3.10.98-jubilinux-edison (robin@robin-i7) #13 SMP PREEMPT Fri Jun 23 02:24:12 EDT 2017
Building boot_params at 0x00090000
Loading bzImage at address 00100000 (4826528 bytes)
Magic signature found
Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=rndis systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=7beb42dc3a904d201d984157e4c3e600 g_multi.dev_addr=02:00:86:c3:e6:00"

Starting kernel ...`

from oref0.

The most likely cause for this kind of failure is Edison SSD degradation. You’ll probably need to reflash the rig, most likely multiple times until it manages to mark all the bad sectors and use other ones. And/or you can buy a fresh Edison off eBay and flash that.

from oref0.

the thing is I am living in Russia currently, so it was okay to have it transported to me but now.... its hard.

How can I start reflashing, when I can't enter on it ?
like what happened ?

from oref0.

can I get your discord, to be able to contact bait easier, please?

from oref0.

You should be able to reimage your current hardware by following the instructions at https://openaps.readthedocs.io/en/latest/docs/Resources/Edison-Flashing/all-computers-flash.html

from oref0.

Could be outdated or highly loaded nightscout? Because when I checked the disk, it was 91% full.

from oref0.

If the kernel won’t even boot, it wouldn’t have anything to do with Nightscout.

from oref0.

It does reboot, when it hangs at starting kernel.....

from oref0.