problem with undefined: unsafe.Slice in oref0-setup.sh script about oref0 HOT 7 OPEN

Are you sending your data collected in xdrip to Nightscout via Railway instead of Herokuapp?

I use Nightscout hosted on Google Cloud Platform. Both xDrip+ and my rig are configured to sync with Nightscout.

are you looping with OpenAPS?

Yep. As far as I know, the only project that uses this oref0 is OpenAPS.

from oref0.

I assume you were using master? I think we fixed this in dev. If you can confirm, we should probably try to get dev ready for another release.

from oref0.

from oref0.

I had this issue yesterday trying to do the upgrade from 0.7.0 to 0.7.1 on the master branch. Switching to the dev branch fixed it for me. I initially had some issue with some missing go packages, but after running rm -rf /usr/local/go/* and trying again, it worked just fine.

Here's my setup info:

• Pump: Medtronic 722, firmware 2.4A
• CGM: Dexcom G6 via xDrip+ on Android, plus Logger on the rig
• Rig: Edison + Explorer board

For the record, this missing packages issue could easily be a one-off thing with my setup; my rig kept dying in the middle of the setup process, both on the master and dev branches. I think it was either due to watchdog and some other things I have running on my rig, or some intermittent issues with my network or internet connections that affected SSH. After I connected directly to the UART port, and stopped the cron and watchdog services, the setup finished without issues. As I took the unscientific approach and introduced multiple variables, it's hard to tell what the real issue was.

from oref0.

Hi @inventor96 I ran into this same issue, used the DEV as suggested above and worked. Im running the same set up as you mentioned above except "logger on the rig"
Are you sending your data collected in xdrip to Nightscout via Railway instead of Herokuapp? and are you looping with OpenAPS?

from oref0.

@inventor96 I believe FreeAPSX also uses oref0 directly, and AndroidAPS uses a port of it.

from oref0.

@inventor96 I believe FreeAPSX also uses oref0 directly

Yes

from oref0.