Hi,
I need separate electricity end-use for freezers (1-5) and coolers (1-3), subfreezer, and dock. I can only get total annual electricity use from ABUPS. The MDD and MTD have very detailed outputs for lights and equipment, which is only 10% of total electricity use, but all chillers are reported under one number. I was not able to figure out how to obtain separate refrigeration electricity use for each zone. If that's really not possible to obtain - how can I calculate it from details below? I have the same issue with refrigerant in the system (I'm not able to get how much is a full charge, which would help me calculate emissions from refrigerant loss etc.).
SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Total Cooling Rate W SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Sensible Cooling Rate W SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Latent Cooling Rate W SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Water Removed Mass Flow Rate kg/s SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Total Electric Power [W](Each Call) SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Fan Electric Power W SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Heater Electric Power W SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Sensible Heat Ratio SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Frost Accumulation Mass Kg SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Zone Sensible Cooling Rate W SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Zone Heating Rate W SUBFREEZERAIRCHILLER_1:Refrigeration Zone Air Chiller Defrost Electric Power W