The project supports running on RaspberryPi, Ubuntu, HomeAssistant,You can also use Python to call compiled DLLs on these platforms.

Add the following to the /boot/config.txt file

dtparam=i2c_arm=on,i2c_arm_baudrate=400000

Add the following to the /boot/config.txt file

dtoverlay=gpio-shutdown,gpio_pin=4,active_low=1,gpio_pull=up

reboot your system

sudo reboot

Wait for the system to restart

git clone https://github.com/UCTRONICS/SKU_RM0004.git

cd SKU_RM0004
make

./display

Open the rc.local file

sudo nano /etc/rc.local

Add command to the rc.local file

cd /home/pi/SKU_RM0004
make clean 
make 
./display &

reboot your system