nokia-t1zhou / segment-routing-step-by-step Goto Github PK

您好：
我咨询一下您，srv6的linux的镜像是多少了呀，我下载了几个总是有问题，所以咨询下您

你好：
SR-TE policy这一步里，我的tunnel口起不来，我把我的配置和您的配置对了一下，也没有什么出入就是起不来，很奇怪，不知道是不是模拟器的问题，想请教一下您
RP/0/0/CPU0:R2#show mpls traffic-eng tunnels
Sun May 3 04:59:36.172 UTC

Name: tunnel-te2 Destination: 192.168.100.10 Ifhandle:0x580
Signalled-Name: R2_t2
Status:
Admin: up Oper: down Path: valid Signalling: wait segment path

path option 1, (Segment-Routing) type explicit path_2_4_5
  Protected-by PO index: none
Last PCALC Error: Sun May  3 02:57:11 2020
  Info: No paths for prefix 1.1.1.4/32
G-PID: 0x0800 (derived from egress interface properties)
Bandwidth Requested: 0 kbps  CT0
Creation Time: Sun May  3 02:54:15 2020 (02:05:21 ago)

Config Parameters:
Bandwidth: 0 kbps (CT0) Priority: 7 7 Affinity: 0x0/0x0
Metric Type: TE (global)
Path Selection:
Tiebreaker: Min-fill (default)
Hop-limit: disabled
Cost-limit: disabled
Path-invalidation timeout: 10000 msec (default), Action: Tear (default)
AutoRoute: enabled LockDown: disabled Policy class: not set
Forward class: 0 (default)
Forwarding-Adjacency: disabled
Autoroute Destinations: 0
Loadshare: 0 equal loadshares
Auto-bw: disabled
Fast Reroute: Disabled, Protection Desired: None
Path Protection: Enabled
BFD Fast Detection: Disabled
Reoptimization after affinity failure: Enabled
Soft Preemption: Disabled
History:
Current LSP:
Setup Time: 2289 seconds
Prior LSP:
ID: 5 Path Option: 1
Removal Trigger: path tear

Segment-Routing Path Info (OSPF 1 area 1)
Segment0[Node]: 1.1.1.4, Label: 16400
Segment1[ - ]: Label: 16510
Displayed 1 (of 1) heads, 0 (of 0) midpoints, 0 (of 0) tails
Displayed 0 up, 1 down, 0 recovering, 0 recovered heads