nicholas-c / heatmiser-wifi Goto Github PK

Supports reading and setting the temperature on a thermostat and giving it a custom name. The files here are a mash up of the built in heatmiser component and the wifi code I found at https://github.com/midstar/heatmiser_wifi so they get the real credit.

To install put these files in config/custom_components/climate/ and in your config yaml put

climate:

• platform: heatmiserWIFI name: Thermostat # Optional. Gives the thermostat a custom name instead of the default 'Heatmiser WIFI' ipaddress: 192.168.0.12 # ip address of your thermostat port: 8068 # port of thermostat. 8068 is the default pin: !secret thermostat_pin # access pin for thermostat. Default is 0000 sensor: floor_temp # Optional. reads the temperature from the thermostats' floor sensor instead of the default air sensor 'air_temp'

This is a work in progress so use at your own risk. After testing I'll clean up the files and submit a pull request to get them into Home Assistant properly.