This repository contains demo projects for those who are interested in getting started with FPGA development.
The EP4CE6E22C8N FPGA board is a major requirement for running and testing the projects in this repository.
All the projects in this repository strictly follow the Synchronous Design Methodology and are written in VHDL.

Source: Vendor's Page

1. AM2302 DHT22 sensor: The module with a red PCB
2. HC-SR04 sensor
3. ILI9341 module: 2.4 inch, 240x320 TFT display with touch
4. 16x2 LCD module: green or blue but without I2C interface
5. HX1838 Infrared remote
6. HC-05 or HC-06 Bluetooth module
7. VGA monitor and cable
8. PS/2 keyboard
9. STM32 Blue Pill board or any MCU with UART, SPI, and USB peripherals.

Here's a list of components that I used for additional verification of my RTL designs beyond testbenches.

1. Saleae 24MHz, 8 Channel USB logic analyzer
2. DSO150 handheld oscilloscope

1. Intel Quartus (Quartus Prime 20.1)
2. ModelSim - Intel FPGA Edition vsim 2020.1 (Quartus Prime 20.1)
3. STM32CubeIDE (if you have an STM32 microcontroller)
4. Python (v3.7 upwards)

1. RTL Hardware Design Using VHDL - Pong P. Chu
2. FPGA Prototyping By VHDL Examples (Xilinx Spartan-3 Version) - Pong P. Chu
3. Circuit Design and Simulation with VHDL, 2nd edition - Volnei A. Pedroni
4. VHDLwhiz
5. Nandland
6. Intel Quartus Prime User Guide: Design Recommendations
7. Jvitkauskas' Repository
8. Cyclone IV FPGA Board Schematic
9. Expansion Board Schematic
10. Vendor's Page