Velleman k8055(N) or VM110(N) linux driver and GUI sources built and tested specifically for the Raspberry Pi [Debian Wheezy, 3.6.11+ #348 armv6l GNU/Linux].
From http://libk8055.sourceforge.net :
"This software allows access to Velleman's K8055 card. This software was developed to replace all other half-complete softwares for the k8055 board under Linux. The library is made from scratch with the same functions as described in Velleman's DLL usermanual. The command line tool is developed from Julien Etelain and Edward Nys code.
The reason for writing another driver for Linux was to get the debounce time to work correctly. Nobody seemed to have figured out how it works (nor did Velleman care to explain) so I studied it and have it working now with +-4% accuracy of the actual settime. Note that the Velleman's DLL doesn't even get this close.
Another reason was to make it simple to use by writing a library for the k8055, libk8055. Just by using "#include <k8055.h>" and compiling with "-lk8055" flags you have access to all the functions described in Velleman's DLL documentation.
The library is now also available in python, thanks to Pjetur G. Hjaltason. Included with the source and some examples as well!
Developer : Sven Lindberg [email protected] (python by Pjetur G. Hjaltason [email protected])"
That site nor the software is no longer actively being maintained.
Install pre-requisites as follows, and build:
$ sudo apt-get install git python-dev libusb-dev swig libwxgtk2.8-dev
$ git clone https://github.com/rm-hull/k8055.git
$ cd k8055
$ make all
$ sudo make install
$ make pylib k8055gui
$ sudo make pyinstall guiinstall
Plug in the K8055 board, observe that the power LED is illuminated and at the command-line, check that the device is recognised:
$ dmesg | grep Velleman
[ 4508.616155] usb 1-1.2: Manufacturer: Velleman
[ 4508.631260] hid-generic 0003:10CF:5500.0001: hiddev0,hidraw0: USB HID v1.00 Device [Velleman USB K8055] on usb-bcm2708_usb-1.2/input0
Then invoke the k8055 command with elevated privileges (root permission is needed for udev access):
$ sudo k8055 -debug -d:147
Parameters : Card=0 Analog1=-1 Analog2=-1 Digital=147
Velleman Device Found @ Address 005 Vendor 0x010cf Product ID 0x05500
Get driver name: - could not get bound driver: No data available
Found interface 0
Took over the device
Set digital:147=>0
25;0;89;118;0;11
This should switch on digital LEDs 1, 2, 5 and 8. See the manual page for more details.
Alternatively, use setuid sticky bits to always run k8055 with root permissions:
$ chmod u+s /usr/local/bin/k8055
The GTK gui must also be executed with root permissions, but GTK doesn't allow setuid, so start the gui using:
$ gksu k8055gui
And providing an X display is present, the following dialog will be displayed:
If you experience an error message when trying to run the k8055gui: error while loading shared libraries ..... cannot open shared object file: No such file or directory. then try:
$ sudo ldconfig -v
to force a rescan of the shared libraries (as reported in issue #1) and retry starting the gui again.
If you do not want to (or cannot) run the command line or gui with sudo permissions, then
copy the velleman.rules files to /etc/udev/rules.d, and create a group called k8055
and assign to those users who should have access.
$ sudo groupadd k8055
$ sudo usermod -a -G k8055 `whoami` # granting access to the usb board for the local user
$ sudo reboot
$ groups # check that the current user has the group k8055, now you can access the board.
The k8055gui does not appear to properly set the digital outs.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent