DYP-A01
Use DYP-A01 ultrasonic distance sensor in Elixir.
Usage
# List available serial ports
iex> Circuits.UART.enumerate
%{
"ttyAMA0" => %{},
"ttyS0" => %{},
"ttyUSB0" => %{
description: "CP2102 USB to UART Bridge Controller",
manufacturer: "Silicon Labs",
product_id: 60000,
serial_number: "0001",
vendor_id: 4292
}
}
# Start a gen server for interacting with a DYP-A01 sensor on port ttyAMA0
iex> {:ok, pid} = DYPA01.start_link(port_name: "ttyAMA0")
{:ok, #PID<0.1407.0>}
# Measure the current distance
iex> DYPA01.measure(pid)
{:ok, %DYPA01.Measurement{distance_mm: 1680, timestamp_ms: 321793}}
Wiring
This library assumes the "UART auto output" mode, which is enabled when the sensor's "RX" cable is unused. For example, when connecting the sensor to Raspberry Pi's GPIO pins, use only the following three pins.
| Cable number | Cable name | Raspberry Pi |
|---|---|---|
| 1 | VCC | GPIO 4 (5V) |
| 2 | GND | GPIO 6 (GND) |
| 3 | RX | |
| 4 | TX | GPIO 8 (RX) |
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent