I go really tired of walking a flight of stairs to push a button on the bridge for the x time. So I though: if only I could use some web call to do that, hmmm Luckily we can!!!
Thanks to all the people in the references!!!
- iBrew iKettle, iKettle 2.0 and Smarter Coffee Interface
- iSamsungTV the command line interface to Samsung TV series C, D, E, F and Blue Ray Disc Players with Smart Hub feature.
- Medisana Scale with Domoticz bridge to Medisana BS440, BS430,... weight scales.
- Xiaomi Mi Plant Sensor with Domoticz bridge
- Vento the itho, duco, orcon, zehnder, storkair: arduino mysensors 2.0 controller!!!
First pin2pwn your way into the bridge... see all the references for more detail information. This is a fast walkthrough! Read the references first!!!
Let's go! Open it up!
Solder a header to it (or not, but makes life easier :-)
Need on of these (1.50 euro :-)
Make sure it's jumper selects 3.3v and connect it with some dupont wires,
USBSERIAL <--> BRIDGE
GND <--> 1 (GND)
TX <--> 4 (RX)
RX <--> 5 (TX)
Use a serial monitor/terminal app (I used the one build in Arduino) to look if you see any chatter. If so short it before it loads the flash... (look for the word bee ;-)
With a prompt. Make your own password on ubuntu (or some other distro that has that command) with the mkpasswd command. Pick MD5 if you want to login to the bridge with ssh. SHA-256 won't work.
mkpasswd --method=MD5
Example output password: toor
$1$trHrRIqN$2iZEbgsyCy12f6tNeKvO41)
if not using ssh you can use SHA-256
mkpasswd --method=SHA-256
Example output password: toor
$5$5ijpVxNPFB$2Viqp.XSTeIHOaV.AKs8Fx.oqytyr5qySFIbr5iza59
Whatever you choose set it up with (your own password):
setenv security '$1$trHrRIqN$2iZEbgsyCy12f6tNeKvO41'
setenv bootdelay 3
saveenv
Reboot... when finished. Login to the terminal
Only works with MD5 passwords...
cp /etc/rc.local /etc/rc.local.orig
echo -e "iptables -I INPUT -p tcp --dport 22 --syn -j ACCEPT" > /etc/rc.local
cp /etc/config/dropbear /etc/config/dropbear.orig
echo -e "\toption Rootl.Login '1'" >> /etc/config/dropbear
Only use if you do not use SSH!
echo -e "iptables -I INPUT -p tcp --dport 23 --syn -j ACCEPT" > /etc/rc.local
echo -e "telnetd" >> /etc/rc.local
Reboot...
After this you can use either telnet or ssh into it... pfff ;-)
The alternative has less nice stuff :-)
cp /etc/opkg.conf /etc/opkg.conf.orig
# Alternative: echo -e "src/gz bsb002 http://downloads.openwrt.org/backfire/10.03.1/ar71xx/packages" > /etc/opkg.conf
echo -e "src/gz bsb002 http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/packages/" > /etc/opkg.conf
echo -e "dest root /" >> /etc/opkg.conf
echo -e "dest ram /tmp" >> /etc/opkg.conf
echo -e "lists_dir ext /var/opkg-lists" >> /etc/opkg.conf
echo -e "option overlay_root /overlay" >> /etc/opkg.conf
opkg update
opkg install nano
echo -e "export TERM=xterm" >> /etc/profile
cp /etc/config/wireless /etc/config/wireless.orig
opkg update
opkg install wpa-supplicant
nano /etc/config/wireless
Make it like this:
config wifi-device radio0
option type mac80211
option channel 11
option hwmode 11ng
option path 'platform/qca953x_wmac'
list ht_capab LDPC
list ht_capab SHORT-GI-20
list ht_capab SHORT-GI-40
list ht_capab TX-STBC
list ht_capab RX-STBC1
list ht_capab DSSS_CCK-40
option htmode HT20
config wifi-iface
option device radio0
option network wlan
option mode sta
option ssid YourSSID
option encryption psk2
option key YourPassword
Save & commit!
uci commit wireless
wifi
nano /etc/config/network
Add
config interface 'wlan'
option ifname 'wlan0'
option ipaddr '192.168.1.2'
option netmask '255.255.255.0'
option ip6assign '60'
option proto 'dhcp'
option hostname 'Philips-hue'
nano /etc/config/firewall
Open it all up add
config zone ‘wlan’
option name ‘wlan’
list network ‘wlan’
option input ‘ACCEPT’
Or copy all entries :-)
config zone 'wlan'
option name wlan
list network 'wlan'
option input REJECT
option output ACCEPT
option forward REJECT
option masq 1
option mtu_fix 1
config rule 'clip_wifi'
option name Allow-CLIP-wifi
option src wlan
option proto tcp
option dest_port 80
option target ACCEPT
option family ipv4
config rule 'factory_wifi'
option name Allow-Factory-wifi
option src wlan
option proto tcp
option dest_port 30000
option target ACCEPT
option family ipv4
config rule 'ssdp_wifi'
option name Allow-SSDP-wifi
option src wlan
option proto udp
option dest_port 1900
option target ACCEPT
option family ipv4
config rule 'mdns_ipv4_wifi'
option name Allow-mdns-ipv4-wifi
option src wlan
option proto udp
option dest_port 5353
option target ACCEPT
option family ipv4
config rule 'mdns_ipv6_wifi'
option name Allow-mdns-ipv6-wifi
option src wlan
option proto udp
option dest_port 5353
option target ACCEPT
option family ipv6
config rule 'hap_ipv4_wifi'
option name Allow-hap-ipv4-wifi
option src wlan
option proto tcp
option dest_port 8080
option target ACCEPT
option family ipv4
config rule 'hap_ipv6_wifi'
option name Allow-hap-ipv6-wifi
option src wlan
option proto tcp
option dest_port 8080
option target ACCEPT
option family ipv6
config rule 'dhcp_renew_wifi'
option name Allow-DHCP-Renew-wifi
option src wlan
option proto udp
option dest_port 68
option target ACCEPT
option family ipv4
config rule 'ping_wifi'
option name Allow-Ping-wifi
option src wlan
option proto icmp
option icmp_type echo-request
option family ipv4
option target ACCEPT
config rule 'dhcpv6_wifi'
option name Allow-DHCPv6-wifi
option src wlan
option proto udp
option src_ip fe80::/10
option src_port 547
option dest_ip fe80::/10
option dest_port 546
option family ipv6
option target ACCEPT
config rule 'icmpv6_input_wifi'
option name Allow-ICMPv6-Input-wifi
option src wlan
option proto icmp
list icmp_type echo-request
list icmp_type echo-reply
list icmp_type destination-unreachable
list icmp_type packet-too-big
list icmp_type time-exceeded
list icmp_type bad-header
list icmp_type unknown-header-type
list icmp_type router-solicitation
list icmp_type neighbour-solicitation
list icmp_type router-advertisement
list icmp_type neighbour-advertisement
option limit 1000/sec
option family ipv6
option target ACCEPT
config rule 'icmpv6_forward_wifi'
option name Allow-ICMPv6-Forward-wifi
option src wlan
option dest *
option proto icmp
list icmp_type echo-request
list icmp_type echo-reply
list icmp_type destination-unreachable
list icmp_type packet-too-big
list icmp_type time-exceeded
list icmp_type bad-header
list icmp_type unknown-header-type
option limit 1000/sec
option family ipv6
option target ACCEPT
opkg update
opkg install lua
opkg install python
echo 1 > /sys/class/leds/bsb002\:blue\:portal/brightness
delay 1
echo 0 > /sys/class/leds/bsb002\:blue\:portal/brightness
echo 1 >/sys/class/leds/bsb002\:blue\:network/brightness
delay 1
echo 0 >/sys/class/leds/bsb002\:blue\:network/brightness
echo "[btn_link,pressed]" > /var/hue-ipbridge/button_in
Just never release it :-) Possible to add it to: /etc/rc.local
echo "[btn_link,pressed]" > /var/hue-ipbridge/button_in
echo "[btn_link,released]" > /var/hue-ipbridge/button_in
nano /etc/ButtonLink.py
Add the following code
__version__ = "0.1"
__all__ = ["ButtonLink"]
import os
import BaseHTTPServer
import urllib
import shutil
try:
from cStringIO import StringIO
except ImportError:
from StringIO import StringIO
class SimpleHTTPRequestHandler(BaseHTTPServer.BaseHTTPRequestHandler):
server_version = "ButtonLinkHTTP/" + __version__
def do_GET(self):
f = StringIO()
f.write("<html>\n<title>HUE Soft Link Button</title>\n")
f.write("<body>Toggled!</body>\n</html>\n")
os.system("echo \"[btn_link,pressed]\" > /var/hue-ipbridge/button_in")
time.sleep(1)
os.system("echo \"[btn_link,released]\" > /var/hue-ipbridge/button_in")
length = f.tell()
f.seek(0)
self.send_response(200)
self.send_header("Content-type", "text/html")
self.send_header("Content-Length", str(length))
self.end_headers()
shutil.copyfileobj(f, self.wfile)
if f:
f.close()
def test(HandlerClass = SimpleHTTPRequestHandler,
ServerClass = BaseHTTPServer.HTTPServer):
BaseHTTPServer.test(HandlerClass, ServerClass)
if __name__ == '__main__':
test()
echo -e "iptables -I INPUT -p tcp --dport 8000 --syn -j ACCEPT" >> /etc/rc.local
echo -e "python /etc/ButtonLink.py" >> /etc/rc.local
Surf to
http://IP_HUE_BRIGE:8000/
to toggle the button...
You're HUE bridges is rooted so you can probably do more fun stuff with it. Note that a factory reset will wipe any trace of any mod you made. It will survive an update (so far)
Well thats-sa-bout-it...
Signed TRiXWooD
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent