SimpleEVSE-WiFi brings WiFi functionality to your SimpleEVSE WB to control your Charging Station very easy. It uses an ESP8266 to communicate with SimpleEVSE WB via ModBus (UART) and offers a web interface to control it. Optional there is a possibility to connect an impulse meter via S0 and an RC522 RFID reader to detect valid RFID tags.

If you want to support this project, I would be very happy about a donation.

• WiFi functionality (as an access point or as a WiFi client)
• Activate and deactivate the Simple EVSE WB via a web interface, RFID tags or a button
• HTTP-API to let other devices control SimpleEVSE-WiFi
• Setting the charging current via the web interface
• Displays the current charging power in kW (by impulses of the S0 counter, optional)
• User management (RFID tags, optional)
• Log of the last charging processes with output of the charged energy quantity, charging time and costs of the charging process (optionally which RFID tag the EVSE was enabled by and the user assigned to it)
• Rudimentary settings (WiFi settings, password for web interface, maximum charging current, etc.)
• Output of all important parameters of the SimpleEVSE WB (Modbus)

Control the Current your EVSE communicates to the vehicle. This page also shows additional data like metered energy and the charging time.

The log page shows the last charging activities.

At the users page you can define valid RFID tags that can unlock the EVSE.

• A complete Wallbox based on EVSE Wallbox link (min. Software revision 8 (2017-10-31) is needed - read the manual there for updating your EVSE software) Attention: revision 9 does not work, because there is a bug in the firmware.
• An ESP8266 module or a development board like WeMos D1 mini or NodeMcu 1.0
• (optional) An electricity meter with S0 interface
• (optional) A MFRC522 RFID Module (PN532 and Wiegand based RFID reader modules are not supported at this time)
• (optional) n quantity of Mifare Classic 1KB (recommended due to available code base) PICCs (RFID Tags) equivalent to User Number

SimpleEVSE-WiFi supports not only the control of the EVSE WB but also the use of a simple button or an RC522 RFID card reader to activate the charging process. With an optional electricity meter, the power requirements of the individual charging processes can be output.

This wiring is mandatory and absolutely needed to run SimpleEVSE-WiFi

Be sure to use a suitable power supply for ESP. At least 500mA is recommended!

*When you use an electricity meter with S0 interface be sure the S0 interface switches to GND, don't use 3.3V or 5V!

**To use a Modbus electricity meter via RS485, you need a extra piece of hardware to translate UART to RS485. In this project a PCB like this is required. Set your meter to baud rate 9600 and slave ID to "002". Until now only SDM120 and SDM630 Modbus meters are supported! If you have another one you can use it with the S0 interface.

To use SimpleEVSE-WiFi, the Modbus functionallity of EVSE Wallbox is needed! By default, Modbus functionality is disabled. To activate it, pull AN input of the EVSE Wallbox board to GND while booting for at least 5 times within 3 seconds. Modbus register 2001 will be set to 1 (Modbus is active). Attention: That change will not be saved! To save the settings, you have to give a R/W operation at a register >=2000. The easiest way to do this is to activate and deactivate EVSE through the WebUI in the "EVSE Control" page.

Attention: make sure that the EVSE WB is not connected to the ESP during the flash process via USB. It could cause overheating of the ESP.

Compiled firmware binary and flasher tool for Windows PCs are available in directory /bin. On Windows you can use "flash.bat", it will ask you which COM port that ESP is connected and then flashes it. You can use any flashing tool and do the flashing manually if you don't want to use the flash.bat.

Please install Arduino IDE if you didn't already, then add ESP8266 Core on top of it. Additional Library download links are listed below:

• Arduino IDE - The development IDE
• ESP8266 Core for Arduino IDE - ESP8266 Core
• ESPAsyncWebServer - Asyncrone Web Server with WebSocket Plug-in
• ESPAsyncTCP - Mandatory for ESPAsyncWebServer
• ESPAsyncUDP - Mandatory for ESPAsyncWebServer
• ModbusMaster - ModbusMaster Library for communicating with EVSE (NOTE: Use my Fork of ModbusMaster! Otherwise the wdt reset will be triggered in case of timeout error)
• SoftwareSerial SoftwareSerial to communicate with EVSE (NOTE: Use the github version! There is a buxfix for esp8266 v2.4.0 and later)
• MFRC522 - MFRC522 RFID Hardware Library for Arduino IDE
• ArduinoJson - JSON Library for Arduino IDE
• NTPClientLib - NTP Client Library for Arduino IDE
• TimeLib - Mandatory for NTP Client Library
• ESP8266Ping - Needed for checking online Status

You also need to upload web files to your ESP with ESP8266FS Uploader.

• ESP8266FS Uploader - Arduino ESP8266 filesystem uploader

Unlisted libraries are part of ESP8266 Core for Arduino IDE, so you don't need to download them, but check that at least you have v2.4.0 or above installed.

When SimpleEVSE-WiFi starts for the first time it sets up a WiFi access point called 'evse-wifi'. You can connect without a password. To connect, open http://192.168.4.1 in your browser. The initial password is 'adminadmin'. You should first check the Settings to bring the ESP in Client mode and connect it to your local WiFi network. The ESP will be restarted afterwards. If it doesn't restart, press the 'RST' button once. Sometimes the ESP must first be manually reset (this only has to happen after flashing a new firmware).

The development of SimpleEVSE-WiFi is very time consuming. If you want to support this project, I would be very happy about a donation.

Since version 0.2.0 there is an HTTP API implemented to let other devices control your EVSE WiFi. The API gives you the following possibilities of setting and fetching information.

gives you the following information of the EVSE WB in json:

GET http://192.168.4.1/getParameters

returns JSON like this:

{
  "type": "parameters",
  "list": [{
    "vehicleState": 2,
    "evseState": false,
    "actualCurrent": 32,
    "actualPower": 5.79,
    "duration": 1821561,
    "energy": 9.52,
    "mileage": 82.3,
    "meterReading": 54.35,
    "currentP1": 8.54,
    "currentP2": 8.54,
    "currentP3": 8.54
  }]
}

returns the following information about the last log entries

GET http://192.168.4.1/getLog

returns JSON like this:

{
  "type": "latestlog",
  "list": [{
    "uid": "ABCD1234",
    "username": "GUI",
    "timestamp": 1523295915,
    "duration": 7504266,
    "energy": 10.32,
    "price": 21
  }, {
    "uid": "-",
    "username": "GUI",
    "timestamp": 1523568920,
    "duration": 1152251,
    "energy": 2.17,
    "price": 23
  }]
}

using setCurrent() will set the current to the given value (e.g. 18A)

GET http://192.168.4.1/setCurrent?current=8

Sets the charging current to 8A and returns

S0_set current to 8A

In cases of Error, the answer would be

will activate/deactivate EVSE WB

GET http://192.168.4.1/setStatus?active=true

Activates EVSE and returns

S0_EVSE successfully activated

In cases of Error, the answer would be