mi0bot / openhpsdr-thetis Goto Github PK
View Code? Open in Web Editor NEWThis project forked from tapr/openhpsdr-thetis
Updated Thetis with support for Hermes Lite 2 functionality
This project forked from tapr/openhpsdr-thetis
Updated Thetis with support for Hermes Lite 2 functionality
Hardware: HL2 driving XPA12B 100W linear amplifier
Issue: When matching the antenna to the linear, the o/p power must be kept down to around 20-30W, else at high SWR the amplifier shuts down. When TUN is pressed, the minimum setting of control Drive is not low enough - 100W is o/p at minimum Drive setting on some bands.
Possible fix: Extend drive control range downwards by not only controlling the HL2 output attenuator, but also the amplitude of the tune-up tone. For maximum fidelity, altering the HL2 attenuator should be at the maximum drive level end.
There is no problem with normal transmission, as there are plenty of gain controls prior to the drive control.
Workaround: Use an external tone from another application + VAC
Much appreciate your work adapting Thetis to HL2 - Bob G4BBY - see my QRZ page
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
Why is there no installer, is there a specific reason for this?
I compiled the Thetis installer and everything seems to work.
Skins, meters, etc. have all been installed and seem to be working without any problems.
Reid,
Please incorporate the PTT timeout feature Richie Just implemented in v2.10.3.5.
Thank you!
Mike WA3O
Thetis 2.9.0.8 isn't saving the tranmit EQ settings. This was also true of the Beta6 version.
Best regards
Neil
Originally posted by @Nero311 in #15 (comment)
Is your feature request related to a problem? Please describe.
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
Describe the solution you'd like
A clear and concise description of what you want to happen.
Describe alternatives you've considered
A clear and concise description of any alternative solutions or features you've considered.
Additional context
Add any other context or screenshots about the feature request here.
Is your feature request related to a problem? Please describe.
No.
Describe the solution you'd like
When I use the DIG modes, would there be a way to save different VAC settings ? So when I switch on digital modes, I could route the audio to virtual cables to digital softwares like FLDigi or WSJT.
Describe alternatives you've considered
I have to create a new transmit profiles when I switch to DIG modes where I have set virtual audio cables.
Additional context
Maybe have an option to be able to save or not save VAC settings (check box) when you switch modes from analog to DIG.
get hl2, in march 2023. firmware 7.3
there is no way to get audio feedback while transmitting in cw mode.
Hello,
When I try to monitor the mic on Thetis HL2 Beta1 in USB or LSB, the audio sounds out of phase in my headphones and it sounds pretty bad. On AM, it sounds perfect.
I tried that on PowerSDR 3.4.9 and 3.5.0 and it works perfectly on USB or LSB so it seem to be a problem only to the Thetis version.
Am I the only one who has the same effect while monitoring microphone ?
Simply turn on the MON button, set to LSB or USB and monitor your mic with headphones, it will sound out of phase, then switch to AM and it sounds perfect, just like PowerSDR.
Running Thetis 2.9.0.8 HL2-Beta1 on Windows 10 computer.
Thanks !
The beta5 is expired. Are you planning a new beta?
73 Johan
PA3GSB
Hi all,
I was wondering if it is possible to get full power range of the TUNE button ?
When I hit the TUNE button, the lowest power is about 1W.
1W is regardless of the PA settings when set at -7.5.
Any possible way to mod the HL2 Beta revisions so that it would give full range of tuning power ?
I am looking for 0.1 to 0.2 to tune a predrive amp so I can tune the final amp at around 10W. At 1W of predrive, my final amp receive around 30-40W (depending on the band) which make the final amp tune at really high power like 400W.
That would be a very nice feature to give full power control at least on the TUNE button !
Thanks for all that incradible work !
Describe the bug
I use HL2 on LSB and use the VAC1. When clicking Setup/ Audio/ VAC1 you see two settings under the Gain box. It allows you to set the audio gain settings for both transmit and receive. The transmit setting is not restored.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
I would expect to see the TX gain setting at 20
Desktop (please complete the following information):
Additional context
Thanks .. got my HL2 today and having a ball! -- Larry W8ER
Describe the bug
After re-install I cant launch HL2 sitting on 192.168.1.x/24 while I am at 192.168.9.x/24 (Wireguard).
Used to work before but now static IP wont work - it seems to go back to discovery only.
Steps to reproduce the behaviour:
Move HL2 to different broadcast domain.
Expected behaviour
Be able to select an IP adddress and skip discovery over UDP.
Win11 and Win10 Tested.
Describe the bug
despite switch off the averaging on the Setup/Display/RX1 panel the Panfall spectrum is averaged
To Reproduce
averaging switched off:
but the display is still averaged:
Expected behaviour
on the un averaged display the morse code shuld be seen on the waterfall
Screenshots
see shots upper
Desktop (please complete the following information):
win10x63 2.10.3.4-64 HL2 Beta3
Additional context
looking for config for CW contesting
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
Describe the bug
When right click on the Drive, it will draw a red line in the slider to indicate the limitation of output power.
It indeed draws the limitation, but it is not limiting the output power. The output power still goes to the full maximum although draws the red line in the middle of the slider.
Expected behaviour
Limit the power
Describe the bugil mio problema è che in tx non segue il filtro grafico quando io uso DUP +PS-A +CTUN provate anche voi Grazie
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
If I press MOX or TUNE, Drive is 0/full output, I see at my external power meter that the PA of HL2 switched on with a litte delay, full power 5W come a little bit later as I press MOX.
If I try the same with my HL2 with SDR Console, there the PA comes up immediately without any delay.
Is Thetis doing something different here? Or is it correct like it is ?
Thanks for answer,
73 Heiko, DL1BZ
v2.10.3.5-beta1 questa non funziona per niente non parte il software ci sono errori.
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
Describe the bug
When running the HL2 on AM, the low pass filter has no effect on the transmit.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
Get the high pass filter to cut low extention when using AM on transmit profile
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Describe the bug
Right clicking on the A-ATT(bottom left of the screen) it switches to S-ATT but then I can't switch back to A-ATT
Expected behaviour
Switch from A-ATT to S-ATT and then back to A-ATT after right clicking.
Desktop (please complete the following information):
Windows 10.
Additional context
Add any other context about the problem here.
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
with Pa gain set to 39 as originally i get 1w out.
if i set to 100 get 3w that is the maximum power i can get now
No way to get the full power from hl2
I use as CW input the option SETUP > DSP > CW a COM with RTS/DTR as trigger input. I defined this as secondary and activate unter OPTIONS Sidetone (tick on). CW working correct, but I don't hear no sidetone. The MON ON/OFF has not any effect too. Is there any way to generate a CW sidetone, if I use this way for CW keying ?
73 Heiko, DL1BZ
Describe the bug
The power meter in upper right corner of Thetis shows "zero" power during TX. The measured power on artificial 50 Ohm load is 6W. The measured "AIN1" and "AIN2" signals from the Filter board don't fit the required level. When measured by scope the scope shows the small positive / negative peaks when TX starts / ends. I wonder about issue in the SWR bridge on the Filter board.
To Reproduce
Steps to reproduce the behavior:
Expected behavior
The value on the power meter has to show the proper value in wats (or dBm).
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
Would it be possible to add the Thai Region in a coming update to Thetis in the Setup - General - Region menu?
Thailand-BandPlan-2020.pdf
Three bands are special : 80M (from 3.5 to 3.6), 60M prohibited and 40M (from 7.0 to 7.2).
Link : https://www.qsl.net/rast/text/HF-VHFbandplan.html
73 - Pierre - FK8IH
Thailand-BandPlan-2020.pdf
Describe the bug
Uninstalled previous Ramdor v2.10.3.4 and then intalled Ramdor Thetis v2.10.3.5.
I then copied v2.10.3.5-HL2β2 on a different folder and as soon I try to open it, I get a Fatal Error
message box.
Ramdor v2.10.3.5 does start correctly and seem to be working well.
To Reproduce
I simply try to start v2.10.3.5-HL2β2 and this Fatal Error
occurs Index was outside the bounds of the array.
When I hit OK
, v2.10.3.5-HL2β2 closes.
Expected behaviour
Just start.
Screenshots
Desktop (please complete the following information):
Additional context
2.10.3.4 worked well, now this issue with HL2beta2
I uninstalled EVERYTHING with RevoUninstaller, deleted v2.10.3.5-HL2β2 folder and anythying related to Thetis in the registry, restarted the computer and redo the install and copy of v2.10.3.5-HL2β2 and still the same issue.
v2.10.3.5-HL2β1 same Fatal Error
occurs.
Thank you.
Hello,
since 2.10.3.5 beta 1 and 2 the automatic AGC reduces gain more agressive than in 2.10.3.4.
For example, two screenshots taken at same time / band:
2.10.3.4 / AGC Gain 66 / A-ATT -28
2.10.3.5 BETA 2 / AGC Gain 46 / A-ATT -28
TX Meter is missing the scales since 2.10.3.5:
vy 73 de Roland, DC1RS
Describe the bug
A clear and concise description, in English, of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
Thanks for your hard work and recent releases !
I tried with HL2 beta5 and still the same issue with MON function while on USB or LSB... AM sounds good. You need stereo headphone to computer soundcard and turn on MON, use either USB or LSB and MON sounds very bad like out of phase.
When on AM, MON sounds beautiful (beside VAC latency).
Tested again and not found on powersdr 3.4.9 or 3.5.0. Seem to be an issue with HL2 and Thetis.
Originally posted by @Aleziss in #7 (comment)
hello Reid,
if changing from ANAN typ radios to Hermes Lite, the "Network Settings" screen changes to the new IP address layout.
I liked the new IP address layout from the very beginning, It is more convenient to enter IP addresses.
Wouldnt it be possible and nice as well to use the new IP address layout also for ANAN radios?
I would like to point out the following issue which also affects HL5 Beta.
Thetis versions greater 2.9.0.3 obviously do not run on Korean or Japanese Windows 10 / 11 versions.
To verfiy this behavior I installed a Korean Windows 10 in a virtual machine. I can now confirm that versions greater than 2.9.0.3 do not work. Thetis can be installed, but the error message mentioned appears when the program starts. This also applies to Thetis HL2 Beta 5 from MI0BOT. On the other hand, the version of G7KLJ https://github.com/w-u-2-o/Thetis-2.9.0/releases/tag/2.9.0.31a seems to work on Korean Win10.
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
Reid
I will make a video of this and include link to it.
I will also reset my database to exclude and corruption there:
Problem using an HR50 to track band changes with Beta 3- 40-10 meters works correctly and right data is sent.
160,80,60 and (yes, I know not supported 6M) sends wrong band data.
If I use the standard Thetis version Ritchies the correct band changes and data are sent.
I'll try and get a couple videos of each will need to do video cell phone so I can show HR50 received data.
Wanted to post while had a chance and saw this occurring- will reset database first and send update if that resolves- but you may wish to look at the code/data sent via beta 3. I do not recall this with Beta 2, but it is possible as I was fighting with other issues as well.
Thanks,
Rick N8SDR
Reid ... I see in Beta 2 that the Drive Slider works as it should -- Nice! However when I go to SetUp/PA Settings, the PA gain setting has no effect on the HL2 amplifier gain and obviously the power output. That setting is used to set the Max HL2 Power Out (when drive slider is set to 0db) to prevent overdriving my amplifier.
It is simple to reproduce, simply go to Setup/PA Settings tab and change the gain setting on the band that you have selected. The default is 38.8. With Beta 1 my setting for 80m was 49.3 to set the PA output to 4.0 watts. In Beta 2 that setting has no effect on the PA output (gain).
Expected behaviour
As in my description that PA gain setting allows me to precisely set the Max output of the HL2 (drive control at 0db) to my amplifiers required input just prior to activating the overdrive protection.
Desktop (please complete the following information):
Win 10 / 11 -- tested on both OS's
Additional context
Nope! Thanks Reid -- Larry W8ER
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
Is your feature request related to a problem? Please describe.
No. But would there be a way to pull skins directly from GitHub from the Skin Server list ?
That way, where there are changes, updates could be pushed to GitHub and updated automatically when user redownload the skin by overring previous files.
Describe the solution you'd like
I did create a skin that I host on GitHub. I had my skin based on Thetis v2.10.0-HL2 by MI0BOT.
Now with the latest Thetis v2.10.3.4, button size have changed and placement have also changed on some graphical items.
I did upgrade my skin to match the latest version of Thetis but the person that host my file has to verify when I do some changes. If he does not follow my GitHub, the skin will never be updated from within Thetis skin server.
Describe alternatives you've considered
I don't know how this could be done otherwhise, I think GitHub is a nice platform to host files and push changes. That way we do not rely on other users servers to host our files.
It would also be mice to have a solution to reflect revisions and skins versions that are tied to various Thetis version as changes can be made at any time in graphics size and positions.
Additional context
Hopefully that would be possible to host skins from GitHub servers.
Thanks for the awesome work you guys are all doing on Thetis and the HL2 support.
Describe the bug
When you move the Mic level button slider, you can see it reflect in the Setup Audio VAC1 TX Gain.
But if you change the gain within the setup audio vac1 tx gain, the Mic level slider does not move and does not change it's value.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
When you set the Mic TX Gain in the Setup, Audio, VAC1 tab, it should reflect the level on the user interface.
Screenshots
See attachment.
Desktop (please complete the following information):
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
Is your feature request related to a problem? Please describe.
No. Would there be a way to implement an Auto-Tune button to activate auto tuners but without a final amp to be keyed ?
Describe the solution you'd like
I am running the HL2 with a predrive amp and Acom tube amp as the final.
With the new I/O board, we could activate the auto tuner by just keying the pre-drive amp to the tune preset level and NOT the final tube amp.
But when you need to tune peak the final amp, the current TUN button would key both amplifiers at the tune preset level so the tube amp can be properly set.
Describe alternatives you've considered
Maybe add two FUNCTION buttons to the Option Panel. Those buttons could be programmed to trig routines in the I/O board or even be used to control other aspect of Thetis maybe by selectable objects in setup.
Additional context
That is what it could look like:
Thanks for the AWESOME work and support of Thetis and the HL2.
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
new MULTI METER
is not working. just got a black window
Is your feature request related to a problem? Please describe.
No
Describe the solution you'd like
Is it possible to have the CL2 output level adjusted ?
Describe alternatives you've considered
None seem possible as of this moment beside installing external attenuator.
Additional context
It would be nice to have control of CL2 output level so it could feed other devices that require less signal than what the HL2 is outputing at the CL2 port.
I had to reset the database because the HL2 suddenly did not output the usual power (only 1 W)
All is working fine now
All previous setting were lost
Describe the bug
A clear and concise description, in English, of what the bug is.
To Reproduce
Steps to reproduce the behaviour:
Expected behaviour
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Additional context
Add any other context about the problem here.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.