At startup, 3.5.0 Beta8 zeros out the TX buffer latency and PTT hang time. Real values are only applied if the TX buffer latency and PTT hang time values are adjusted. Even after adjusting the TX buffer latency and PTT hang time, they continued to be zeroed out at the next startup. Low values or high values have the same effect. This results in transmit interruptions and relay clicking. Please see this for more details:
Hello,
I am experiencing the following issue:
I send from an Arduino an "FA;" and get the first time the right answer: "FA000xxxxxx;".
But when I send the second "FA;" I get the answer to the latest frquency but the history of requests, too: "FA000xxxxxx;FA000xxxxxx;". Next time I get 3 items as answer. This issue applies to all CAT responses, they add up. Finally the OpenHPsdr is permanently transmitting.
I wanted to use the CAT commands to request the frequency for the LPF of my PA. Polling seems to add safety getting the latest Band - if I missed something in between.
Many thanks for the brilliant programm, which runs perfectly with my HL2+ including predistortion.
The program version seems to be irrelevant - I use 3.5.0.
The internal test of CAT in the setup gives only one item back, not the history. too.