meraki / dashboard-api-python Goto Github PK
View Code? Open in Web Editor NEWOfficial Dashboard API library (SDK) for Python
License: MIT License
Official Dashboard API library (SDK) for Python
License: MIT License
Hey @shiyuechengineer it appears that the documentation located at
https://developer.cisco.com/meraki/
was updated with the new SDK information but the documentation located at:
https://developer.cisco.com/meraki/api/#/python/getting-started
is still referencing the old SDK.
Just wanted to bring to your attention.
I am able to pull MX devices for each given network but none of the network API calls return the MX appliance HA status ('Current Master', 'Passive;ready', etc.)
Are there any plans of adding this or any other ways to pull this information via the API? It would be very useful information.
Networks where the MX does not have a warm spare, the status could simply be Null or "Standalone"
meraki.getgrouppolicies() "groupPolicyId" is a string. In meraki.getclientpolicy() its an int. I believe these should be, and were at some point previously, the same. Workaround is to cast one to the type of the other.
I use getgrouppolicies() to collect the name and ID of the policies and allow the user to select the interesting one, and then later getclientpolicy() to grab the clients with a certain policy, and move them to a different policy.
an example:
meraki_group_policies=meraki.getgrouppolicies(meraki_keys['apikey'],meraki_keys['networkid'], suppressprint=True)
policy_IDs={}
for policy in meraki_group_policies:
#notice the cast to int here as the workaround
policy_IDs[int(policy['groupPolicyId'])]=policy['name']
meraki_clients=meraki.getclients(meraki_keys['apikey'],meraki_keys['device_serial'], suppressprint=True)
for client in meraki_clients:
client_policy=meraki.getclientpolicy(meraki_keys['apikey'], clientmac=client['mac'], networkid=meraki_keys['networkid'], suppressprint=True)
if client_policy:
if 'groupPolicyId' in client_policy.keys():
# the below test fails as they are different types
if client_policy['groupPolicyId'] in policy_IDs and client_policy['groupPolicyId'] in policy_ID_selected :
print("found the selected policy")
I don't see any methods returning device firmware version. This would be very useful to me. Can someone point me in the right direction to get at that data?
@shiyuechengineer, running into a minor issue that I think we fixed in the legacy meraki.py library. Or maybe I re-wrote it for a project, I can't remember.
Basically if someone mistypes an API key you get a series of errors but the most relevant is from the requests library. Because the dashboard still returns a web page you get a 200 HTTP response but invalid JSON from requests response.json() (basically the dashboard response is HTML but the requests library expects json)
File "/site-packages/meraki/rest_session.py", line 126, in request response.json()
raise JSONDecodeError("Expecting value", s, err.value) from None
json.decoder.JSONDecodeError: Expecting value: line 2 column 1 (char 1)
Can we trap for this error? I trap for it often to give a custom user message. I see it when people are using my tools based on your library but either use the wrong API key or mistype it.
If you can think of a work around without monkey patching (which I don't want to do), please let me know. It's easy to re-create, just use any invalid API key.
Pasting the main program file into http://pep8online.com, we get 447 PEP8 errors and 1 PEP8 warning.
Count | PEP8 Code | Error Text |
---|---|---|
1 | E127 | continuation line over-indented for visual indent |
1 | E225 | missing whitespace around operator |
1 | E265 | block comment should start with '# ' |
21 | E266 | too many leading '#' for block comment |
1 | E302 | expected 2 blank lines, found 3 |
3 | E303 | too many blank lines (3) |
377 | E501 | line too long ( > 79 characters) |
41 | E711 | comparison to None should be 'if cond is None:' |
1 | E713 | test for membership should be 'not in' |
1 | W292 | no newline at end of file |
I am working on a pull request to resolve this issue. I am using PyCharm's built-in PEP8 inspections.
Hello,
I think there is a problem with the exception AsyncAPIError(Exception):
When an exception occur, the exception try to call self.response.json()
Or it should be awaited.
The exception :
PS C:\Users\ttr\Documents\dev\meraki-winmonitor> python.exe .\win-meraki-provide.py -c .\config.ini -m Y C:\Users\ttr\AppData\Local\Programs\Python\Python38-32\lib\site-packages\meraki\exceptions.py:37: RuntimeWarning: coroutine 'ClientResponse.json' was never awaited self.message = self.response.json() if self.response.json() else None RuntimeWarning: Enable tracemalloc to get the object allocation traceback Test 1 : ****** .\win-meraki-provide.py:311: RuntimeWarning: coroutine 'ClientResponse.json' was never awaited print('Test 1 : {}'.format(org['name'])) RuntimeWarning: Enable tracemalloc to get the object allocation traceback
The code used :
` try:
results = await aiomeraki.organizations.getOrganizationInventory(org["id"],includeLicenseInfo ='True')
except:
print('Test 1 : {}'.format(org['name']))`
It happen if the organisation is not licensed by device.
Thanks
Hello,
Is there an access point status query in the module anywhere? i.e a query that shows, up, repeater, down? I can't seem to find if it does exist? or could this be a feature request?
Thanks
Alex.
Upfront Context Disclosure: I lack context on how to determine if the API changed or if this "wrapper" has it wrong, so full disclosure there. As far as I understood, all API endpoints were to be backwards compatible, but maybe the API we have access to isn't the same as the version this library targets.
It seems there's a bit of a mismatch around the API for wiping devices and the function enclosed in this wrapper to invoke that endpoint. The specific endpoint is documented here: https://api.meraki.com/api_docs#wipe-a-device
Looking at the url, it targets a specific device. Comparing to the python variant, it tries to invoke a plural variant (devices instead of device - so https://api.meraki.com/api/v0/networks/[network_id]/sm/devices/wipe rather than the documented endpoint of https://api.meraki.com/api/v0/networks/[network_id]/sm/device/wipe) which takes lists of params rather than a single param (eg. 'ids' rather than 'id'). This is a fairly easy change, but again, I cannot tell if it supposed to be plural or not.
---------------------------------------------------------------------------
APIError Traceback (most recent call last)
<ipython-input-2-f903ab53508d> in <module>
----> 1 meraki.dashboard.http_servers.getNetworkHttpServers('<network-id>')
/usr/local/lib/python3.6/dist-packages/meraki/api/http_servers.py in getNetworkHttpServers(self, networkId)
18 resource = f'/networks/{networkId}/httpServers'
19
---> 20 return self._session.get(metadata, resource)
21
22 def createNetworkHttpServer(self, networkId: str, name: str, url: str, **kwargs):
/usr/local/lib/python3.6/dist-packages/meraki/rest_session.py in get(self, metadata, url, params)
190 metadata['url'] = url
191 metadata['params'] = params
--> 192 response = self.request(metadata, 'GET', url, params=params)
193 return response.json() if response and response.text.strip() else None
194
/usr/local/lib/python3.6/dist-packages/meraki/rest_session.py in request(self, metadata, method, url, **kwargs)
184 else:
185 self._logger.error(f'{tag}, {operation} - {status} {reason}, {message}')
--> 186 raise APIError(metadata, response)
187
188 def get(self, metadata, url, params=None):
APIError: HTTP servers, getNetworkHttpServers - 404 Not Found,
When trying to update device's details shown on dashboard, the update fails. After debugging, it seems that the Query builder is sending an API call to Meraki's dashboard with a "move_map_marker" value of None, while the only acceptable values are either True, or False.
Example code
from meraki_sdk.meraki_sdk_client import MerakiSdkClient
from meraki_sdk.models.update_network_device_model import UpdateNetworkDeviceModel
from meraki_sdk.exceptions.api_exception import APIException
x_cisco_meraki_api_key = my_api_key
client = MerakiSdkClient(x_cisco_meraki_api_key)
devices_controller = client.devices
collect = {}
network_id = my_network_id
collect['network_id'] = network_id
serial = myDeviceSerial
collect['serial'] = serial
update_network_device = UpdateNetworkDeviceModel()
update_network_device.name = 'Testing'
update_network_device.tags = ' recently-added '
update_network_device.lat = 37.4180951010362
update_network_device.lng = -122.098531723022
collect['update_network_device'] = update_network_device
try:
print (collect)
devices_controller.update_network_device(collect)
except APIException as e:
print(e)
Traceback (most recent call last):
File "myNetworks.py", line 1, in
from meraki import meraki
File "/root/dashboard-api-python/meraki.py", line 3267
def updatessidobject(apikey, networkid, newssid: SSID, suppressprint=False):
^
SyntaxError: invalid syntax
Are there any Dashboard APIs that give you the subnet mask of the uplink interfaces?
Hello,
I often encounter this bug:
File "./app/lib/meraki_api.py", line 95, in _get_organization
dev_1 | organizations = self.organizations.getOrganizations()
dev_1 | File "/usr/local/lib/python3.7/site-packages/meraki/api/organizations.py", line 19, in getOrganizations
dev_1 | return self._session.get(metadata, resource)
dev_1 | File "/usr/local/lib/python3.7/site-packages/meraki/rest_session.py", line 142, in get
dev_1 | response = self.request(metadata, 'GET', url, params=params)
dev_1 | File "/usr/local/lib/python3.7/site-packages/meraki/rest_session.py", line 81, in request
dev_1 | raise APIError(metadata)
dev_1 | TypeError: __init__() missing 1 required positional argument: 'response'
Which results from when I get this error (quite often too):
Organizations, getOrganizations - HTTPSConnectionPool(host='api.meraki.com', port=443): Max retries exceeded with url: /api/v0/organizations (Caused by NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection object at 0x7f37bd3e4390>: Failed to establish a new connection: [Errno -2] Name or service not known')), retrying in 1 second
In next release, can we have the ability to log only to console without having to write a log file also? Thanks!
When tags are entered for update device I am getting each letter as a separate tag instead of each word as a tag
I'd like to request that the catch-all else statement at the end of the returnhandler object respect the suppressprint argument.
I'm pulling the org name to test whether the org ID and API key are valid. The API key being invalid works, but if the org ID is invalid, then the results are returned to STDOUT.
Thanks for putting this library together!
Sample of current output as follows.
`meraki.getnetworklist(‘api_key’,organizationId)
Network Operation Successful - See returned data for results
[{'id': 'L_602356450160805778', 'organizationId': '596171', 'name': 'Heathcote Nth 28923', 'timeZone': 'Australia/NSW', 'tags': None, 'type': 'combined'}]`
This causes error when I try to convert the output from JSON to CSV as it couldn't recognise the word None
Can I request the output to be changed to:
[{'id': 'L_602356450160805778', 'organizationId': '596171', 'name': 'Heathcote Nth 28923', 'timeZone': 'Australia/NSW', 'tags': 'None', 'type': 'combined'}]`
Per the email exchange we had internally, the idea here is to enhance the information placed in the User-Agent HTTP Request header to be more like what pip does as can be seen here:
https://github.com/pypa/pip/blob/master/src/pip/_internal/network/session.py
In addition to the SDK version string, pip appends a URL encoded JSON string that includes things like OS version of the caller and Python version. It would be nice to also have a field in that string that partners could set that would identify API calls made by them. I just forked the repo and am working on a patch for this exact scenario.
Hi,
The function for provisioning clients is missing one of the values, using the API you are able to update the name of the client as well as policy and policyID. This is the api-call;
POST/networks/[networkId]/clients/provision
And this is the function I'm referencing;
updateclientpolicy(apikey, networkid, clientmac, policy, policyid=None, suppressprint=False)
Is is it possible to add the name as an object here so this function could be used to rename clients in the dashboard?
Hi Team,
Firstly, love the API and Python class, thank you for all your hardwork.
I wanted to use the API (link below) via the Meraki Python class however it doesn't appear to be added yet. I suspect the API documentation on Meraki's side talks about timespan arguments yet the example has none.
Any ideas when this will be added? Again really appreciate the work.
Thanks in advance,
Chris (Melbourne, Australia)
The following unhandled exception is raised when a request timeout occurs (and all retires are done):
UnboundLocalError: local variable 'response' referenced before assignment
This happens on this line on rest_session.py file
I had some issues installing via pip as it didn't pull dependencies, and could not import properly after installation.
(tmp) ➜ /tmp pip install meraki
Collecting meraki
Installing collected packages: meraki
Successfully installed meraki-0.34
(tmp) ➜ /tmp python
Python 2.7.10 (default, Feb 22 2018, 22:42:27)
[GCC 4.2.1 Compatible Apple LLVM 9.0.0 (clang-900.0.39.2)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> from meraki import meraki
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named meraki
>>>
I added a setup.py and restructured slightly for what I think would be the required updates, feel free to PR if you like
Hey guys,
This error is completely random.
I use the API to backup some parts of my organizations in meraki cloud.
Sometimes i get this error with backingup my switchports.
The problem is that it realy is not consistent when it happens.
Long story short, I build another PY file ready to restore the organization
Does anyone have an idea on this ?
Error:
***Backing up switchports
Traceback (most recent call last):
File "back-all-org.py", line 363, in
write_switchports(apikey,row['id'], suppressprint)
File "back-all-org.py", line 222, in write_switchports
if port['name'] is not "":
TypeError: string indices must be integers
Code:
def write_switchports(file, apikey, networkid, suppressprint):
switches = []
devices=meraki.getnetworkdevices(apikey, networkid, suppressprint)
file.write("\t# switchports\n")
for device in devices:
if "MS" in str(device['model']):
switches.append(device)
for switch in switches:
file.write("\t# switch " + str(switch['name']) + "\n")
file.write("\tprint(\"Restoring switchports\")")
file.write("\t# https://dashboard.meraki.com/api_docs#switch-ports\n")
portname = "None"
porttags = "None"
switchports = meraki.getswitchports(apikey, switch['serial'], suppressprint)
for port in switchports:
if port['name'] is not "":
portname = "\""+str(port['name'])+"\""
else:
portname = "None"
if port['tags'] is not None:
porttags = "\""+ port['tags']+"\""
else:
porttags= "None"
file.write("\tmeraki.updateswitchport(apikey, \""+ str(switch['serial']) +"\", "+str(port['number'])+", "+ portname +", "+porttags+", "+str(port['enabled'])+", \""+str(port['type'])+"\", "+str(port['vlan'])+", "+str(port['voiceVlan'])+", \""+str(port['allowedVlans'])+"\", "+str(port['poeEnabled'])+", "+str(port['isolationEnabled'])+", "+str(port['rstpEnabled'])+', \"'+str(port['stpGuard'])+"\", "+str(port['accessPolicyNumber'])+", "+"suppressprint)\n")
file.write("\n")
def updatevlan
does not include the change of he DHCP option like
dhcpHandling - The appliance's handling of DHCP requests on this VLAN. One of: "Run a DHCP server", "Relay DHCP to another server", or "Do not respond to DHCP requests"
dhcpRelayServerIps - The IPs of the DHCP servers that DHCP requests should be relayed to
Hi,
I started using your script and is very useful. I have a question ... just wondering ....
Is it possible to use a function call via REST API to change the below?
Device attributes:
I'm doing some work with scripting setting up alerts using webhooks. Having the alerts and HTTP server calls being exposed as part of this library would be helpful in that regard. #
If I do anything for as a none 0 value for 'perClientBandwidthLimitDown' or 'perClientBandwidthLimitUp' i get the error 'Download bandwidth is too small (minimum: 20Kbps)'.
The value that I am sending, 10240, should work, and does work if I manually set it through the dashboard.
dashboard.ssids.updateNetworkSsid(networkid, ssidnum, **ssid)
Bad Request, {'errors': ['Download bandwidth is too small (minimum: 20Kbps)']}]
[[{'adminSplashUrl': None,
'authMode': 'psk',
'bandSelection': 'Dual band operation',
'enabled': True,
'encryptionMode': 'wpa',
'ipAssignmentMode': 'NAT mode',
'minBitrate': 11,
'name': 'My Home Lab',
'number': 0,
'perClientBandwidthLimitDown': 10240,
'perClientBandwidthLimitUp': 10240,
'psk': 'SonderGuest',
'splashPage': 'Click-through splash page',
'splashTimeout': '1440 minutes',
'ssidAdminAccessible': False,
'walledGardenEnabled': False,
'wpaEncryptionMode': 'WPA2 only'},
SSIDs, updateNetworkSsid - 400 Bad Request, {'errors': ['Download bandwidth is too small (minimum: 20Kbps)']},
SSIDs, updateNetworkSsid - 400 Bad Request, {'errors': ['Download bandwidth is too small (minimum: 20Kbps)']}]]
It seems that the Query builder is sending a "switchProfileId" value of "None" when this value is omitted by the UpdateNetworkDeviceModel() object used to build the query, and regardless of the device type. This is causing the update to fail as Meraki's dashboard is expecting the API call to either have a valid switchProfileId value or no switchProfileId value
Example code
from meraki_sdk.meraki_sdk_client import MerakiSdkClient
from meraki_sdk.models.update_network_device_model import UpdateNetworkDeviceModel
from meraki_sdk.exceptions.api_exception import APIException
x_cisco_meraki_api_key = my_api_key
client = MerakiSdkClient(x_cisco_meraki_api_key)
devices_controller = client.devices
collect = {}
network_id = my_network_id
collect['network_id'] = network_id
serial = myDeviceSerial
collect['serial'] = serial
update_network_device = UpdateNetworkDeviceModel()
update_network_device.name = 'Testing'
update_network_device.tags = ' recently-added '
update_network_device.lat = 37.4180951010362
update_network_device.lng = -122.098531723022
update_network_device.move_map_marker = False
collect['update_network_device'] = update_network_device
try:
print (collect)
devices_controller.update_network_device(collect)
except APIException as e:
print(e)
myNetworks = meraki.getnetworklist(apikey, orgid)
result = ""
for networkdevicelist in myNetworks:
networkid = networkdevicelist["id"]
deviceList = meraki.getnetworkdevices(apikey, networkid)
for devices in deviceList:
serialnum = devices["serial"]
clientList = meraki.getclients(apikey,serialnum)
for clients in clientList:
d = clients.copy()
d.update(devices)
d.update(networkdevicelist)
result = result + str(d) + ","
i can get
w.writerow([row['usage'], row['id'], row['description'], row['mdnsName'], row['dhcpHostname'], row['mac'], row['ip'], row['vlan'], row['switchport'], row['lanIp'], row['serial'], row['lat'], row['lng'], row['address'], row['name'], row['model'], row['networkId'], row['organizationId'], row['timeZone'], row['tags'], row['type']])
how to get columns below?
there are first seen and last seen date time
Please add functions for content filtering and Intrusion prevention
I've run into a few methods that return HTTP Status Code: 404 - No returned data, even though I can see data in the Dashboard that I would expect to be returned.
For instance,
meraki.getnetworklist(apikey, orgid)
HTTP Status Code: 404 - No returned data
meraki.getorginventory(apikey, orgid)
HTTP Status Code: 404 - No returned data
This orgid definitely has networks with devices in it that I can view from Dashboard. Using different orgid's and the same call may give me data, or may give me the 404.
Any ideas?
I'm sorry to ask you this here, but only you can help me. What's the "destCidr" limit? How many IP addresses can there be in one rule (or string length limit) ? I'm working on automation right now and I want to have one Black list for each brunch.
Thank you for your job and for API.
Hello,
we have a problem with Cisco Meraki REST API (https://developer.cisco.com/meraki/api/#/rest/)
It seems that there doesn't exist REST endpoints for getting such basic information like ARP, MAC, routing tables etc. We can see that information in the Meraki app where those data received through the CometD web messaging service.
Is there any way how we can get those data in some kind of public API?
Many of the functions utilise the __hasorgaccess
function in order to test access prior to proceeding.
This sounds fine, however currently it appears that the /api/v0/organizations
call will fail if one of the organizations which an API key's owner has access to is employing "IP address whitelisting" (Organization -> Settings -> Security -> Login IP Ranges), and the requestor's IP address is not included in the configured ranges.
E.g.
1.2.3.4
/api/v0/organizations
from 5.6.7.8
to find out which orgs they have access to - response:403 - You are trying to access Dashboard from an unauthorized IP address (5.6.7.8). Contact your network administrator for more information.
Because of this error, __hasorgaccess
will fail, whether the org involved is using "whitelisting" or not, and then the original call will also fail.
E.g.
----> 1 meraki.getnetworklist(api,org)
~/meraki/meraki.py in getnetworklist(apikey, orgid, templateid, suppressprint)
1775 # Confirm API Key has Admin Access Otherwise Raise Error
1776 #
-> 1777 __hasorgaccess(apikey, orgid)
1778 calltype = 'Network'
1779
~/meraki/meraki.py in __hasorgaccess(apikey, targetorg)
806 if validjson is True:
807 for org in currentorgs:
--> 808 if int(org['id']) == int(targetorg):
809 orgs.append(org['id'])
810 return None
TypeError: string indices must be integers
I believe the API endpoint /api/v0/organizations
is not behaving as expected.
I would expect that it should either:
Regardless, it's current behaviour is breaking this module is operating if any org that the user is a member of is employing "whitelisting".
If this is the correct behaviour of /api/v0/organizations
, perhaps this module can be modified to use another call to test access to an org.
I'm going to "make a wish" containing the following content, in order to try and get /api/v0/organizations
fixed:
# Fix `/api/v0/organizations` API endpoint
It appears that the `/api/v0/organizations` call will fail if one of the organizations which an API key's owner has access to is employing "IP address whitelisting" (Organization -> Settings -> Security -> Login IP Ranges), and the requestor's IP address is not included in the configured ranges.
E.g.
* User has 2 organizations which they are a member of
* OrgA
* OrgB
* OrgA has "whitelisting" configured, allowing only `1.2.3.4`
* OrgB does not have "whitelisting" configured
* User attempts to call `/api/v0/organizations` from `5.6.7.8` to find out which orgs they have access to - response:
> 403 - You are trying to access Dashboard from an unauthorized IP address (5.6.7.8). Contact your network administrator for more information.
I believe the API endpoint `/api/v0/organizations` is not behaving as expected.
I would expect that it should either:
* provide a list of organizations which the API key is allowed to access from the current IP (excluding OrgA in the above case), or
* provide a list of organizations which the API key's owner is an administrator of (regardless of IP restrictions), and return an error when attempting to access an organization (using any call which would provide information about, or modify the target organization) which has excluded the requestor's IP address.
This also affects the meraki.py python module's operation, due to the way it relies on `/api/v0/organizations` - more information here: https://github.com/meraki/dashboard-api-python/issues/28
Please modify `/api/v0/organizations` so that it operates more in line with user expectation (as one of the above expectations, if possible).
Thank you!
🙂
Give us the ability to control where the meraki_api_log is saved so that it doesn't pollute the root working directory
Hi
I am try copy your code to run , I copied and pasted to Pycharm , when I run it , I have get my organization code and get error message as below:
Analyzing organization other license.com:
can you help me ? thanks !
Hi,
Im running meraki==0.100.1.
Im using it together with Celery Tasks.
I tested to see how it behaves without any connection to Meraki Cloud and it seems like the errors meraki python library is producing are not pickable.
Task handler raised error: <MaybeEncodingError: Error sending result: '"(1, <ExceptionInfo: APIError('Organizations, getOrganization - None None, None')>, None)"'. Reason: ''PicklingError("Can't pickle <class 'meraki.exceptions.APIError'>: it's not the same object as meraki.exceptions.APIError")''.>
billiard.pool.MaybeEncodingError: Error sending result: '"(1, <ExceptionInfo: APIError('Organizations, getOrganization - None None, None')>, None)"'. Reason: ''PicklingError("Can't pickle <class 'meraki.exceptions.APIError'>: it's not the same object as meraki.exceptions.APIError")''.
Those two are the error messages i see.
The bind to template function works fine, but the autobind=true doesnt seem to work. When the devices get added to the network i still have to manually go bind the switch to the profile. Just curious if anyone else has any experience with this.
updatenetwork and addnetwork operate differently. updatenetwork requires tags to be in a list, while addnetwork the tags are in a string.
This looks to be newer behavior at the moment. But logs are now being printed to the output, and also a file is being created in the project directory without having logs setup. I see creating files and printing output to the screen as something that the application developer should choose to do, not the SDK.
Creating a 'combined' network comes back with an invalid nettype.
I can't find function to change malware settings and Intrusion prevention settings
While teaching someone else to do the extended User-Agent demo, I discovered that the sample scripts that pull that data and create a CSV out of it can't handle the structure Windows client data because of a missing "distro" element. The code for apiData2CSV_v0.py and apiData2CSV_v1.py needs to be altered with conditionals for missing elements.
Hello,
Following the debugging of the SDK from issues #68 & #72, I still get my mysterious error happening at random on any type of call made to Meraki, quite frequently.
Now, with your fix I get this sort of error: Organizations, getOrganizations - None None, None
.
Do you know the origin of this error (timeout from Meraki, network problem, ...)?
Would you be able to send back a true error for it? I mean with an error message/code/etc., because None does not tell us what is the origin or why it happened in the first place.
I myself do not know where it comes from.
To resolve it without interrupting the user, I usually do a sleep(0.5)
and then retry the call.
For each of our discussions in previous issues, I usually deploy a new network with devices etc. to test the error. It does not happen every time, but I usually only need a few calls (1-5) to get it again.
Missing API Function for Management Interface Settings. Need function to return and update management interface settings.
When I call the updateNetworkDevice function from devices and an address is specified and moveMapMarker is set to True, the map marker does not move in the dashboard. I can also specify the lat and lng when calling the same function, excluding the moveMapMarker parameter, and the map marker will still not move in the dashboard. If I login to the dashboard and open the address properties of the device and click save without modifying the address, it will move it to where it's supposed to be.
C:\Users\martlee2\Documents>pip install --upgrade requests
Requirement already up-to-date: requests in c:\python27\lib\site-packages (2.18.4)
Requirement not upgraded as not directly required: chardet<3.1.0,>=3.0.2 in c:\python27\lib\site-packages (from requests) (3.0.4)
Requirement not upgraded as not directly required: certifi>=2017.4.17 in c:\python27\lib\site-packages (from requests) (2018.4.16)
Requirement not upgraded as not directly required: urllib3<1.23,>=1.21.1 in c:\python27\lib\site-packages (from requests) (1.22)
Requirement not upgraded as not directly required: idna<2.7,>=2.5 in c:\python27\lib\site-packages (from requests) (2.6)
dhclientlist 0.0.6 has requirement requests==1.2.3, but you'll have requests 2.18.4 which is incompatible.
pyem7 0.0.dev1 has requirement requests==2.7.0, but you'll have requests 2.18.4 which is incompatible.
C:\Users\martlee2\Documents>pip install meraki
Requirement already satisfied: meraki in c:\python27\lib\site-packages (0.30)
dhclientlist 0.0.6 has requirement requests==1.2.3, but you'll have requests 2.18.4 which is incompatible.
pyem7 0.0.dev1 has requirement requests==2.7.0, but you'll have requests 2.18.4 which is incompatible.
and how to download csv with the api
for
manage/usage/list
Hello,
I tried your new release which should have fixed #68, but I think the SDK is broken now... ;)
The thing is, I receive the correct logs from your application, such as :
09/03/2020 16:03:12 [ERROR] rest_session::request::160 - Networks, createOrganizationNetwork - 400 Bad Request, {'errors': ['Name has already been taken']}
The problem is the fact that the data returned by the calls is always None None, None
(printed in str format as Networks, createOrganizationNetwork - None None, None
)
For example, for the same call above I get this dict of values on the error:
09/03/2020 16:03:12 [WARNING] decorators::wrapper::74 - {'response': <Response [400]>, 'tag': 'Networks', 'operation': 'createOrganizationNetwork', 'status': None, 'reason': None, 'message': None}
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.