MeArm Website Where these are available to purchase.

MeArm GitHub Code and resources.

Mime GitHub Code, resources, and the Mirobot.

phenoptix Thingiverse Physical designs and dxf files, alternative hosting, and other designed products.

This repository contains the cutting files for the MeArm. The MeArm is an Open Source 4DOF robot arm. It is intended to be a low cost and accessible robotics project for STEAM education.

Laser cut (3mm) dxf files and Assembly instruction pdf files are sorted into folders based on versions.

Files are collected from the various sources listed above.

Available in this repository

• V3.0 Revised with no elastic bands, still requires a PCB. Build time around 40 minutes.
• V2.0 Designed for MeArm Pi Kickstarter, incorporates a PCB in the base. Requires elastic bands or nitrile O rings. Build time 30 minutes.
• V1.0 First finished version. No PCB required. Build time around 2 hours.

All hosted on Thingiverse .

• V1.0 (First Finished Version)
• V0.4 (Considered the Beta Arm)
• V0.3 (Considered the Alpha Arm)
• V0.2 (Heavy Weight Revision)
• V0.1 (Proof of Concept)

The hardware is released under Creative Commons Share-alike 3.0.
All other code is open source so please feel free to do anything you want with it; you buy me a beer if you use this and we meet someday (Beerware license). Also this boiler plate is yoinked from Sparkfun with thanks. Images are CC-SA-NC soz, have the files and design but take your own pics ;)