mbiang / sensu-plugins-disk-checks Goto Github PK

check-disk-usage

Check disk capacity and inodes based upon the gem sys-filesystem.

Can adjust thresholds for larger filesystems by providing a 'magic factor' (-m). The default, 1.0, will not adapt threshold percentages for volumes.

The -l option can be used in combination with the 'magic factor' to specify the minimum size volume to adjust the thresholds for.

By default all mounted filesystems are checked.

The -x option can be used to exclude one or more filesystem types. e.g.

check-disk-usage.rb -x debugfs,tracefs

The -p option can be used to exlucde specific mount points. e.g.

check-disk-usage.rb -p /run/lxcfs

It's also possible to use regular expressions with the -x or -p option

check-disk-usage.rb -p '(\/var|\/run|\/sys|\/snap)'

Refer to check_mk's documentation on adaptive thresholds.

You can also visualize the adjustment using WolframAlpha with the following:

y = 100 - (100-P)*(N^(1-m))/(x^(1-m)), y = P for x in 0 to 1024

Where P = base percentage, N = normalize factor, and m = magic factor

check-fstab-mounts

Check the mount points in /etc/fstab to ensure they are all accounted for.

metrics-disk-capacity

Acquire disk capacity metrics from df and convert them to a form usable by graphite

metrics-disk

Read /proc/iostats for disk metrics and put them in a form usable by Graphite. See iostats.txt for more details.

metrics-disk-usage

Based on disk-capacity-metrics.rb by bhenerey and nstielau. The difference here being how the key is defined in graphite and the size we emit to graphite(now using megabytes), inode info has also been dropped.

check-smart-status

Check the SMART status of hardrives and alert based upon a given set of thresholds

check-smart

Check the health of a disk using smartctl

check-smart-tests

Check the status of SMART offline tests and optionally check if tests were executed in a specified interval

• bin/check-disk-usage.rb
• bin/check-fstab-mounts.rb
• bin/check-smart-status.rb
• bin/check-smart.rb
• bin/check-smart-tests.rb
• bin/metrics-disk.rb
• bin/metrics-disk-capacity.rb
• bin/metrics-disk-usage.rb

This is a sample input file used by check-smart-status and check-smart, see the script for further details.

{
  "smart": {
    "attributes": [
      { "id": 1, "name": "Raw_read_Error_Rate", "read": "left16bit" },
      { "id": 5, "name": "Reallocated_Sector_Ct" },
      { "id": 9, "name": "Power_On_Hours", "read": "right16bit", "warn_max": 10000, "crit_max": 15000 },
      { "id": 10 , "name": "Spin_Retry_Count" },
      { "id": 184, "name": "End-to-End_Error" },
      { "id": 187, "name": "Reported_Uncorrect" },
      { "id": 188, "name": "Command_Timeout" },
      { "id": 193, "name": "Load_Cycle_Count", "warn_max": 300000, "crit_max": 600000 },
      { "id": 194, "name": "Temperature_Celsius", "read": "right16bit", "crit_min": 20, "warn_min": 10, "warn_max": 40, "crit_max": 50 },
      { "id": 196, "name": "Reallocated_Event_Count" },
      { "id": 197, "name": "Current_Pending_Sector" },
      { "id": 198, "name": "Offline_Uncorrectable" },
      { "id": 199, "name": "UDMA_CRC_Error_Count" },
      { "id": 201, "name": "Unc_Soft_read_Err_Rate", "read": "left16bit" },
      { "id": 230, "name": "Life_Curve_Status", "crit_min": 100, "warn_min": 100, "warn_max": 100, "crit_max": 100 }
    ]
  },
  "hardware": {
    "devices": [
	  { "path": "sda", "ignore" : [ 187 ] },
	  { "path": "sdb", "override": "/dev/twa0 -d 3ware,0" }
	]
  }
}

Installation and Setup

If you are verifying certificates in the gem install you will need the certificate for the sys-filesystem gem loaded in the gem certificate store. That cert can be found here.