Comments (8)
martin2250
commented on June 23, 2024
Hi,
just for completeness, do you have .NET 4.6 installed?
If the problem persists, please post screenshots and gcode files that had the problem.
from opencncpilot.
iw2fvo
commented on June 23, 2024
Hi, my PC runs windows 7 _64 bit and 8 GRAM. Net 4.5 is installed.When I try to load net 4.6 I got a message saying that this OS does not support 4.6 .Any other possibility for me please ?thanksAmbro
On Tuesday, January 10, 2017 1:57 PM, Martin Pittermann <[email protected]> wrote:
Hi,
just for completeness, do you have .NET 4.6 installed?
If the problem persists, please post screenshots and gcode files that had the problem.—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or mute the thread.
from opencncpilot.
martin2250
commented on June 23, 2024
No, OpenCNCPilot can only run on machines with .NET 4.6.
According to MS, Windows 7 supports .NET 4.6:
https://www.microsoft.com/en-us/download/details.aspx?id=53344
from opencncpilot.
iw2fvo
commented on June 23, 2024
Thanks Martin, very good indication :Win 7 needs SP1 to accept net 4.6.2. Now I can connect to the CNC, I can manually control the CNC and I can import GCODE files.Could you please spend other few words indicating to me the steps required to apply the Z probing / correction to my GCODE files ?Thanks again for the great assistance.Regards,Ambro
On Tuesday, January 10, 2017 5:21 PM, Martin Pittermann <[email protected]> wrote:
No, OpenCNCPilot can only run on machines with .NET 4.6.
According to MS, Windows 7 supports .NET 4.6:
https://www.microsoft.com/en-us/download/details.aspx?id=53344—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or mute the thread.
from opencncpilot.
vyanez
commented on June 23, 2024
Hi everyone, as soon I connect my machine on Machine settings it start the spindle and goes all the way down without any stop. Have I configured something in a wrong way?
from opencncpilot.
luizabbadia
commented on June 23, 2024
I have one proble almost like this and it was bad grounding. My 24V spindle
power supply wasn´t grounded and this was the problem.After grounding
everything was fine.
…On Thu, Jan 12, 2017 at 10:44 PM, Victor ***@***.***> wrote:
Hi everyone, as soon I connect my machine on Machine settings it start the
spindle and goes all the way down without any stop. Have I configured
something in a wrong way?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#5 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AFKGboezOjSdWluAt8KSR7hIlWylkgbnks5rRsjzgaJpZM4LeO0o>
.
--
Sds
L.Abbadia
from opencncpilot.
martin2250
commented on June 23, 2024
@iw2fvo applying the height map should be as simple as pressing "apply height map". See the video for all the steps in the process, if you have any more questions, feel free to ask.
from opencncpilot.
martin2250
commented on June 23, 2024
@vyanez please don't hijack unrelated issues.
does it happen right after clicking "connect" or is it a connection problem?
If it's not a problem with the connection please open a new issue. thanks!
from opencncpilot.
Related Issues (20)
- Opencncpilot on winxp HOT 1
- bdring port crash HOT 3
- Can support for grbl-Mega-5X be added? HOT 4
- Height map going too deep or too shallow HOT 2
- Z-Axis driven to top limit when Heightmap run HOT 3
- when click "Probe and set zero" Z-axis motor vibrates and does not move HOT 4
- Fusion "no motion mode active" G28 G91 Z0 HOT 3
- Feature request: Reverse probing - for lost machine coords HOT 1
- New man on the blok :) HOT 1
- start Probe error HOT 8
- Please bring the warning message window to be on top of all other windows HOT 1
- not really an issue... again ;) HOT 1
- Problems with etching a new pcb HOT 18
- button to place viewport centered flat HOT 2
- Probbing Feed Rate setting HOT 2
- cannot get arrow keys to work or run to darken from grey on probing HOT 1
- measure distance of two points in the viewport, snap to coordinates HOT 2
- Received Bad Status ?? HOT 3
- engine speed HOT 2
- isolation job HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from opencncpilot.