malja / garduino Goto Github PK

Before project publication, some documentation has to be written.

• Hardware wiring
• Video showing real word usage
• Flowchart showing relations between tasks
• Configuration and building

Add code for opening and closing vent into TaskRunWatering.

There should be menu action, which runs calibration for soil humidity sensor.

This requires new Task, which reads values from sensor. User should be prompted to insert sensor into dry, wet and normal soil to calculate threshold.

Current battery saving code was not tested. Please use voltmeter and check if it does any good.

Write code for counting how many liters were already used for watering. Watering should be stopped when specified number of liters is used.

For counting, use interrupts on pin 2 connected to the sensor. Value should be stored in one of available registers.

There should be a variety of multipliers when changing value of variable in menu. For example allow x10, x50 and x100 multipliers.

Sensor was not connected when writing the code. Before moving on, it should be tested with connected sensor. Value for default threshold should be set.

Design and print cover case.