Comments (13)
makerbase-mks
commented on July 19, 2024
https://github.com/makerbase-mks/MKS-Robin-Nano-V2/wiki
Can this document help you?
from mks-robin-nano-marlin2.0-firmware.
HulusiAKAR
commented on July 19, 2024
NO !
from mks-robin-nano-marlin2.0-firmware.
Noferix
commented on July 19, 2024
Me ocurre lo mismo, al tratar de compilar el marlin y actualizar el firmware se queda colgado en tft updating 100% y ya no inicia, tambien he tratado de configurar los ajustes con mkstool version web pero no controlo nada de la impresora, los endstop no funcionan, el motor de z gira al revés, y tampoco consigo configurar doble motor en z, es todo un desastre, he tenido que comprar la versión 1.2 con el archivo nano35.txt que es muchísimo mas simple y rápido. Se esta trabajando en una solución para todo esto? o tengo que deshacerme de esta placa?
from mks-robin-nano-marlin2.0-firmware.
makerbase-mks
commented on July 19, 2024
@HulusiAKAR @Noferix The last version firmware has more partment can be change and setting, you can update it.
from mks-robin-nano-marlin2.0-firmware.
anlkaplan
commented on July 19, 2024
@HulusiAKAR Merhaba motorların jumperlarını takamadımda şuana kadar sizin kartın fotoğrafını atabilir misiniz
from mks-robin-nano-marlin2.0-firmware.
Noferix
commented on July 19, 2024
@HulusiAKAR Los drivers encajan perfectamente, mi placa es una robin nano 2 y los drivers tmc2225, aunque la placa cuenta con pines adicionales que en los drivers no estan soldados y no se para que son.
from mks-robin-nano-marlin2.0-firmware.
themacboy
commented on July 19, 2024
Prueba a borrar todo lo que hay dentgro de la carpeta .pio para que fuerce
a bajar todas las librerias desde zero y compila de nuevo.
Tambien puedes probar a primero restaurar con una versión pre compilada (la
de la carpeta firmware) si se recupera entonces poner la tuya. A mi esto
tabmien me ha solucionado algun problema.
Missatge de Noferix <[email protected]> del dia dg., 13 de set. 2020
a les 12:06:
… Me ocurre lo mismo, al tratar de compilar el marlin y actualizar el
firmware se queda colgado en tft updating 100% y ya no inicia, tambien he
tratado de configurar los ajustes con mkstool version web pero no controlo
nada de la impresora, los endstop no funcionan, el motor de z gira al
revés, y tampoco consigo configurar doble motor en z, es todo un desastre,
he tenido que comprar la versión 1.2 con el archivo nano35.txt que es
muchísimo mas simple y rápido. Se esta trabajando en una solución para todo
esto? o tengo que deshacerme de esta placa?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#59 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AB5QVXYSZVNYQCPW53HNQTTSFSKRBANCNFSM4PIXJEMA>
.
from mks-robin-nano-marlin2.0-firmware.
themacboy
commented on July 19, 2024
this documnet and the wiki are very useful !
But more video example can help a lot.
Missatge de makerbase <[email protected]> del dia dt., 28 de jul.
2020 a les 13:55:
…
https://github.com/makerbase-mks/MKS-Robin-Nano/wiki/MKS-Robin-Nano-V2.0-User-Manual
Can this document help you?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#59 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AB5QVX4MITYFDQJIZFG5GF3R524CFANCNFSM4PIXJEMA>
.
from mks-robin-nano-marlin2.0-firmware.
Noferix
commented on July 19, 2024
@themacboy Fue lo primero que pense, "restablecer de fabrica el firmware" y volver a compilar marlin de 0 pero aun asi me ha dado problemas y no se ni por que, de hecho intente modificar solo el tipo de drivers y en cuando compilo ya me ocurre este problema y no entiendo nada. He revisado la wiki y buscado en youtube y en internet pero la placa es tan nueva que no se tiene casi ninguna informacion :(
from mks-robin-nano-marlin2.0-firmware.
themacboy
commented on July 19, 2024
la version pre-compilada tampoco te carga, la de la carpeta firmware que
compila mks?
Missatge de Noferix <[email protected]> del dia dt., 15 de set. 2020
a les 18:23:
… @themacboy <https://github.com/themacboy> Fue lo primero que pense,
"restablecer de fabrica el firmware" y volver a compilar marlin de 0 pero
aun asi me ha dado problemas y no se ni por que, de hecho intente modificar
solo el tipo de drivers y en cuando compilo ya me ocurre este problema y no
entiendo nada. He revisado la wiki y buscado en youtube y en internet pero
la placa es tan nueva que no se tiene casi ninguna informacion :(
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#59 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AB5QVX6IIJZ7PLMLCWYQVK3SF6IIBANCNFSM4PIXJEMA>
.
from mks-robin-nano-marlin2.0-firmware.
Noferix
commented on July 19, 2024
La original si, es la que utilizo para "restaurar" pero cuando compilo una nueva versión solo modificando los drivers se queda clavado al 100% y al reiniciar la placa aparece boting... hasta que vuelto a "restaurarla"
from mks-robin-nano-marlin2.0-firmware.
meteozond
commented on July 19, 2024
@Noferix I've ran into this problem too. Looks like you are trying to flash wrong file: .pio/build/mks_robin_nano35/firmware.bin instead of .pio/build/mks_robin_nano35/Robin_nano35.bin
from mks-robin-nano-marlin2.0-firmware.
mks-viva
commented on July 19, 2024
The latest version firmware has support it. So, i will close it
from mks-robin-nano-marlin2.0-firmware.
Related Issues (20)
- No USB flash menu item when compiled with TFT_COLOR_UI HOT 1
- [BUG] HAL_SD_IRQHandler HOT 1
- White screen - FW: MKS update on 11. April HOT 8
- Enabling Thermal Runaway Protection causes complier error HOT 2
- Extruder stops after a few minutes but x,y,z continue normally HOT 5
- [BUG] LCD has no display but touch sensor is still usable
- Marlin 2.1.1 error: #error "SERIAL_PORT must be from 1 to 6."
- Zoffset not work!!![BUG] (bug summary)
- not compiling with MKS_Robin_nano35 for MKS Robin Nano v1.2 HOT 2
- [BUG] Can't compile v3.1
- Cant Compile for Nano v1 HOT 1
- Latest version does not work. In the previous version, there is no double z motor and driver.
- icons are missing on robin nano v2 HOT 1
- DO NOT FLASH IT IN TT SP-5
- [BUG] Robin Nano v3.1 datatransfer by wifi => No temp-crontrol during transfer
- Marlin 2.0.9 impossible to compile for MKS Robin Nano V3.1 [SOLVED] HOT 1
- Please someone help with my MKS Robin Nano v3.1
- [BUG] Icons/Font will not update Robin Nano v1.2 HOT 1
- [BUG] When using TFT_LVGL_UI E0 won't move
- MKS WiFi module does not work with MKS Eagle and H43 display
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from mks-robin-nano-marlin2.0-firmware.