lspoplove / d-duino Goto Github PK

Jadid

https://github.com/koogar/Gnat-Stats
Can you make one that supports D-Duino?

Hi

I am using Mac, and can compile code ok with Arduino IDE 1.18.

I have installed USB Drivers from : http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx#mac

But when I try to upload I get :

Sketch uses 251513 bytes (24%) of program storage space. Maximum is 1044464 bytes.
Global variables use 32192 bytes (39%) of dynamic memory, leaving 49728 bytes for local variables. Maximum is 81920 bytes.
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
error: espcomm_upload_mem failed

Any advice?

I have the board and want to use it with my own software that supports I2c and the SSD1306 OLED... but my search function shows no I2c device..

is the OLED connected as I2c - or SPI ???

Wont compile, as looking for this file, where is it located?

/Volumes/Macintosh HD 2/Users/Documents/Arduino/D-duino-master/Arduino-examples/OLED/OLEDtest/OLEDtest.ino:41:20: fatal error: images.h: No such file or directory
#include "images.h"
^
compilation terminated.
exit status 1
Error compiling for board NodeMCU 1.0 (ESP-12E Module).

Hi,

I found out, that I need to hold FLASH and then press RST to flash my D-duino V2.
Is there no auto reset?

I'm using the WiFi Scanner example (Board: NodeMCU 1.0, Freq: 80mhz, Flash size: 4M(3M SPIFFS), Upload speed: 115200), the result is a mostly white screen with black dots and only a narrow black strip partially showing text.

When the device was first started, it showed the demo content with no issues, leading me to believe this is not a hardware issue.

Hi,

I've a spare PCB of D-Duino-B V2 which I got after purchasing WiFi Deauther, If you can share Bill of material and schematics I can build it for myself. Thanks! :)

Hi,

Which Pin is tied to the onboard LED? I would like to turn it off while using the board.
Thank you.

i connected a touch sensor's output to d1 and now the screen is blank.

I think my screen needs a reset, do I need to short pin 14 on the ribbon cable or is there some other way to reset the display? Any other advice for troubleshooting a once working display?