Wrong wiring table in readme? about csr-spi-ftdi HOT 6 CLOSED

Working!

The wiring that works for me:

IDK if it's relevant, but I'm on Win10 64-bit, PSTool v.2.6.6.1311
I downloaded csr-spi-ftdi-0.5.3-a5.zip, associated with commit 1f342f2

Using FT232RL (IDK if genuine or not) in SSOP28 package, on own board, at 3.3V VCCIO (powered from Flip4's board)

from csr-spi-ftdi.

Thanks for catching this! Somehow "HWSPI" pinout was used by default instead of that described in README. This is also most likely a cause of some other issues filed here. Fixed in 0.5.3-a9.

from csr-spi-ftdi.

Thanks for quick fix, and for the tool. I'd test it, but I somehow busted my chip in a matter of an hour =(
If curious, see https://hackaday.io/project/162337-reverse-engineering-jbl-flip-4

from csr-spi-ftdi.

The chip turned out to be fine. I tested the new release (csr-spi-ftdi-0.5.3-a9) with pinout in readme, and it works. Thanks.

from csr-spi-ftdi.

from csr-spi-ftdi.

Working!

The wiring that works for me:

Signal FTDI pin name
CS# CTS#
CLK Tx
MOSI Rx
MISO RTS#
IDK if it's relevant, but I'm on Win10 64-bit, PSTool v.2.6.6.1311
I downloaded csr-spi-ftdi-0.5.3-a5.zip, associated with commit 1f342f2

Using FT232RL (IDK if genuine or not) in SSOP28 package, on own board, at 3.3V VCCIO (powered from Flip4's board)

I used QCC3008 module and it works for me, thank you very much

from csr-spi-ftdi.