Git Product home page Git Product logo

noir's Introduction

NOIR

NOIR

Introduction

Wabbajack discord.

Changelog

NOIR is a modlist based on NOISE for playing Requiem 3.4. With enhanced graphics, mechanics, and immersion, the general idea is to maintain Requiem mechanics as much as possible staying true to the original vision of Requiem; kind of Requiem+.

Warnings/Disclaimers

Wabbajack no longer requires that you have Nexus Premium to install the modlist, however, having Nexus Premium will cut your install time to a fraction of what it would be instead of downloading each mod individually (and save you a thousand clicks or so).

As of v1.2, the modlist requires ~110GB (46GB Downloads/63GB Mods) of hard drive space on top of the ~10GB Skyrim: Special Edition base files. You can setup the Downloads folder in a another drivem, read WJ's help on Discord. Installing onto an SSD is not required, but strongly recommended.

Download and installation times vary based on your computer and internet speeds but expect the entire process to take a couple of hours.

NSFW Warning: By default this modlist contains nude models for female NPCs.

Support is not provided for adding to, changing, or removing mods from the modlist. If you’re uncertain of how to use xEdit at a minimum, making any changes at all is a great way to have a Bad Time™.

Getting Started

This process requires 113GB of hard drive space and takes a few hours depending on your internet and computer speed. Installing on an SSD is recommended.

Download Wabbajack.exe. This can be found in the #builds channel in the Wabbajack discord.

Create a folder at the root of your drive called Wabbajack. Place the Wabbajack.exe in this folder. i.e., C:\Wabbajack\

Upgrading from previous versions of NOIR:

Wabbajack now supports in-place upgrades, however, anything that doesn’t match the modlist will be deleted. If you’ve added your own mods, back them up to be safe.

Overwrite the previous NOIR.wabbajack installer with the new one and run the installer with the new one.

Overwrite the previous installation of NOIR, after you’ve ensured you’ve backed up your saves.

You do NOT have to update unless a release is found to have a critical bug.

System Specs

With or without DynDOLOD generated, I recommend 4-6GB of VRAM for optimal performance, especially with an ENB.

Old Files Cleanup/Steam Config

This is only necessary one time, and only if you’ve used NMM or Vortex previously. If you have other Wabbajack modlists installed, ignore these instructions, skip to the Installation section in this readme.

Next, delete any files you may have from old installations or previous modding adventures. Delete the following directories:

  1. C:\Program Files (x86)\Steam\steamapps\common\Skyrim Special Edition

  2. C:\Program Files (x86)\Steam\steamapps\common\Skyrim Special Edition Mods

    1. Note: This directory may not exist and will have been left over from previous usage of Wrye Bash.
  3. Open Windows Search and copy/paste %LOCALAPPDATA%

    1. Delete Skyrim Special Edition & LOOT ( If you have never run LOOT on your computer, this directory will not exist)
  4. Open Windows menu and copy/paste %APPDATA%

    1. Delete zEdit & Mod Organizer (If you have never run zEdit or MO2 on your computer, these directories will not exist.)
  5. Open Windows menu and copy/paste %HOMEPATH%\Documents\My Games\

    1. Delete Skyrim Special Edition

Setting Up Skyrim

Next, open Steam, find The Elder Scrolls V: Skyrim Special Edition, right click on Skyrim, click Manage, then click Uninstall. Download and install Skyrim again.

The Program Files folder is not recommended and could cause issues.

Steam Overlay

  1. Open Steam
  2. Click Library at the top
  3. Find The Elder Scrolls V: Skyrim Special Edition and right click it
  4. Click properties
  5. Uncheck Enable the Steam Overlay while in-game

Update Proofing

  1. Open Steam
  2. Click Library at the top
  3. Find The Elder Scrolls V: Skyrim Special Edition and right click it
  4. Click Properties
  5. Select the Updates tab
  6. Under the Automatic Updates section, select the Only update the game when I launch it option

Initial Skyrim Configuration

  1. Open Steam
  2. Launch The Elder Scrolls V: Skyrim Special Edition
  3. In the launcher window that appears, click OPTIONS
  4. In the menu that appears, click the Ultra button (this is irrelevant, we set up inis for you, but it's good to do anyway)
  5. Set the Aspect Ratio
  6. Set the Resolution
  7. Set Antialiasing to Off
  8. Make sure Windowed Mode is unchecked
  9. Make sure Borderless is unchecked
  10. OK to save the settings
  11. Close the launcher window

Installation

Create a new directory in the root directory of the hard drive where you want everything to be installed. Do not create a directory within your Skyrim folder. For this guide, we will create an example directory in C:\ called NOIR. You can create this folder on any drive.

  • Open Wabbajack.
  • Select "NOIR" from the list of available modlists on the Wabbajack UI.
  • Click "Download and Install."
  • Select the Installation Location as the folder you created in the root directory of your hard drive. If you are creating these on your C:\ drive, please type in C:\NOIR in Installation Location and C:\NOIR\Downloads in the Download Location if you are using only this modlist. If you have other WJ's modlist installed, you can use the same Download folder and the installer will download only the missing files required for NOIR.
  • After you have completed these steps, click Begin.

DO NOT SET THE PATHS TO YOUR SKYRIM GAME FOLDER.

I REPEAT, DO NOT INSTALL MODLISTS TO YOUR SKYRIM STEAM FOLDER.

A window will open in Wabbajack asking if you’d like to authorize Wabbajack to use your Nexus Mods account. Log in, and click authorize. Wabbajack will now install the mod list for you. Once Wabbajack has finished all of its processes, the right pane will say Installation complete! You may exit the program. At this point it is safe to close Wabbajack.

If you don’t see Installation complete, Wabbajack has encountered an error. Inside of the NOIr folder, delete everything except the downloads folder.

If you get an error immediately after authorizing Wabbajack on the Nexus website, download and install the .Net Framework 4.8 Runtime executable. Restart your computer and start Wabbajack again.

If Wabbajack fails to download a mod, it means that the mod may have been updated on the Nexus. Wait for a new release of my Modlist. Look around in Discord channels to see if I already mentioned that I'm going to update for this specific mod. Or check the Current Release Notes in Drive folder.

Do not ask other people to share older files as this is a violation of the Nexus Terms of Service and Wabbajack’s server rules. This constitutes mod piracy and will result in an immediate ban.

Expanding on server rules, do NOT contact outside authors such as DarkLadyLexy or Belmont Boy outside of the Wabbajack Discord for help with your Wabbajack installation.

Installation Part 2

Now we have to copy files over into their correct spots. Navigate to C:\NOIR\Game Folder Files\. Copy all of these files and paste them into C:\steamapps\common\Skyrim Special Edition\

Follow the steps for Nvidia Profile Inspector on Lexy's Guide for antialiasing and capping your FPS using your GPU driver, if not using ENB. For AMD users, use ENB or set the "Frame Rate Target Control" under "Global Settings".

Opening Mod Organizer 2

Navigate to C:\NOIR\ and open ModOrganizer.exe

If it asks you to associate Mod Organizer 2 with nxm links, click yes.

Launching The Game

In Mod Organizer 2, select SKSE from the drop down menu next to the Run button and click Run. This is how you will launch Skyrim from now on.

Setup and MCM Recommended Settings

Setup and MCM

Alternate DynDOLOD Settings

By default, NOIR comes packed with premade LOD's. However, these LOD's are 2D and thus still have some pop in. If you would like to remove as much of this pop in as possible follow these instructions. Please note that doing this will cost you a significant chunk of performance (about 10 frames). This is not recommended if you're also using an ENB unless you have 8GB of VRAM.

  1. Deactivate the mod "NOIR - Dyndolod Output" and "NOIR - TexGen Output" in the left pane of MO2
  2. Open up your install folder and navigate to tools\DynDOLOD\Edit Scripts\DynDOLOD\cache
  3. If there are files other than becauseofreasons.txt delete them. Ensure that becauseofreasons.txt remains there.
  4. Go back one folder so you're in tools\DynDOLOD\Edit Scripts\DynDOLOD
  5. Open up DynDOLOD_SSE.ini in a text editor like notepad
  6. Scroll down to the line that says TreeLOD=1 and change it to 0
  7. Open MO2 and run TexGen and create a mod called "NOIR - TexGen Output (3D)" and activate it
  8. Ensure that LOD Texture Size is 512
  9. Run it
  10. Exit the program and run DynDOLOD
  11. Click advanced on the window that pops up
  12. Set the Output Directory to an empty folder somewhere
  13. Set up DynDOLOD in accordance with the settings shown below, and then click the High preset at the top right.
    • In the top left selection box, check all of the boxes by right-clicking and then clicking "Select All".
    • Below the preset buttons, check the boxes marked "Candles" and "FXGlow".
    • In the options panel, tick the "Generate static LOD", "Generate DynDOLOD" "Windows", "High", "Fake lights in child worlds"
    • "Create texture atlas" checkboxes.
    • In the options panel change Max tile size to "512".
  14. Ensure that all worlds are ticked on the top left
  15. Click start - this process takes about 30 minutes depending on hardware
  16. Once it's done make sure the log says it's complete and then hit "Save and Exit"
  17. Navigate to where you set the output folder before and open it
  18. Copy all of its contents and put it into a new mod called "NOIR - Dyndolod Output (3D)"
  19. Overwrite when asked
  20. Activate "NOIR - Dyndolod Output (3D)" and move DynDOLOD.esm just above FISS.esp

Resources

To learn more about Mod Organizer 2, please watch this video.

Adding an ENB:

  1. If you want to add an ENB you need d3d11.dll and d3dcompiler_46e.dll files from ENBSeries and place them in your Skyrim Special Edition Game Folder along with the ENB files. Also grab any other files that the ENB you wish to add specifies.

  2. Refer to the installation instructions that are on the ENB’s page. I recommend anything made for Obsidian Weathers.

I use Re-Engaged for Obsidian on my personal installation, ENB is not included with NOIR.

Adding ReShade:

F.A.Q

Wabbajack Discord FAQ

The difficulty is too hard!

That's Requiem for you, but you will get used to, check these guides:

I also recommend to watch this playlist: Ranger Playthrough. Skyrim: Requiem 3.1 (2019)

The dungeons are too dark!

  • What dungeons, realistically, aren't dark? Hold "E" to turn on your lantern.

There are empty mods with red X's!

  • Leave them alone. Do not touch. Do not touch anything in optional folders. These mods are merged. This applies to all modlists.

Can you add/remove X mod?

  • Yeah, I am open to suggestions, but I am also slow to implementing stuff. The list is pretty rock solid right now. Check the setup guide for instructions to add it yourself.

The modlist updated, and you added/removed X mod?!?! Why??!?

  • Because I felt like it, or it didn't fit my original vision, or it's too much of a hassle to deal with. I have a limited time left on this planet and don't want to recompile/fix things every 5 minutes. If you enjoy the version you're on, there is no need to update with WJ. You can update mods yourself, and check for relevant updates by using the Updated tab on the SSE Nexus

I want to use another body instead of the UNP that comes with Diversity.

  • This is unsupported.

Credits & Thanks

  • Shelb for letting me use her modlist as a base to build upon and all her support.
  • Total for let me use his music compilation in NOIR and tips for the build
  • lilmoefow for all the patches and support for Requiem in SSE
  • JDSmith for tips about how to patch things correctly

And the same credit for NOISE apply:

Contributors of NOISE

  • Total for helping me pick out landscape textures, assisting me with xEdit
  • Helidoc for taking over and maintaining NOISE for DoubleDog
  • JustThatKing for assisting with conflicts and choosing textures
  • Lively for assistance, convincing me to do this, and also convincing me to join the Tester team, and contributing to NOISE
  • DinDisco for assisting in conflict resolution
  • Nathan for solving texture seam issues, and contributing to NOISE
  • Halgari for being patient with me and assisting in modlist creation
  • Skyrim prep and install instructions guidelines from Mdc211's Lexy LotD Wabbajack guide
  • All of the above for testing, providing feedback, and assisting with this guide.
  • Mod Authors: Do not forget to endorse!

noir's People

Contributors

giraldiego avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.