Last update: 2024/05/12
The project is working again, thanks to @pdf83 support.
Sungrow has changed some behavior in the firmare and the main script needed to be updated.
2023/12/10
After updating my SG5.0RS to the firmware version SUNSTONE-S_B000.V001.P029-20231019.zip the inverter is lo longer requesting the address 356+8 registers (164H, Active power of phase A,B,C and Total active power). In addition, the meter is not detected on the web yet.
But we have a new player: fe03500000018105. Register 5000H? What is that?
The script cheater.sh has been updated to answer 0, but no request for active power is received yet.
Do you know the solution? Please let me know on "issues". Thanks in advance.
Sungrow DTSU666 power meter emulation using a Raspberry Pi
This is a research project that aims to emulate a Sungrow Meter DTSU666
cheater.sh
meltaxa/solariot#27
https://stackoverflow.com/questions/2746553/read-values-into-a-shell-variable-from-a-pipe
https://www.exploringbinary.com/twos-complement-converter/
calc_crc16.sh
https://ctlsys.com/support/how_to_compute_the_modbus_rtu_message_crc/
https://github.com/onslauth/bash_crc16
https://stackoverflow.com/questions/8564267/crc16-algorithm-from-c-to-bash
https://crccalc.com/
- A Sungrow inverter, I'm using a SG5.0RS
- A Raspberry Pi, I'm using a Raspberry Pi 2 and a 2 GB SD card
- Raspberry Pi OS Lite, I'm using 32-bit: https://www.raspberrypi.com/software/operating-systems/#raspberry-pi-os-32-bit
- A 485 dongle, I'm using a ARCELI USB to 485 adapter: https://amzn.eu/d/59K0N9B
- Install the required software: sudo apt install screen stty curl jq
Connect two wires from COM2 terminals (A2,B2) to 485 adapter terminals (D+,D-). Read the documentation of you inverter, I have used the page 20 of this manual: https://aus.sungrowpower.com/upload/file/20210707/SG2.0-6.0RS-UEN-Ver11-202106.pdf
- Copy these files to /home/pi/cheater
cheater.sh
Shelly_get_em0_power.sh
Shelly_get_em0_voltage.sh
calc_crc16.sh
- Run "crontab -e" and add:
@reboot (cd /home/pi/cheater; screen -d -m ./cheater.sh)
- Not mandatory but recommended: run "sudo crontab -e" and add:
0 4 * * * /sbin/reboot
- Reboot and run "screen -r" to check if the communication is working:
request: fe03003f0001a009: slave 254 ($FE), register 63 ($3F), 1 register | answer: address=254 ($FE), baud rate=1 (9600 bps) FE0302FE012DF0
request: fe03500000018105: slave 254 ($FE), register 20480 ($5000), 1 register | answer: device type coding=0x20D5 FE030220D5740F
request: fe03016400081020: slave 254 ($FE),register 356 ($0164), 8 registers, Active power of phases A,B,C and Total active power | answer: (A,Total=-615 W, B,C=0 W) FE0310FFFFFD990000000000000000FFFFFD99DED2
request: fe0300770001201f: slave 254 ($FE), register 119 ($77), 1 register, Frequency | answer: 50 Hz, FE030200322D85
request: fe03000a000c71c2, register 10 ($0A), 12 registers, Current forward active total/spike/peak/flat/valley/... electric energy | answer: (0,0,0,0,0,0) FE03180000000000000000000000000000000000000000000000006F1F
request: fe03003f0001a009: slave 254 ($FE), register 63 ($3F), 1 register | answer: address=254 ($FE), baud rate=1 (9600 bps) FE0302FE012DF0
request: 207300000001c370: slave $20, register 0 ($00), 1 register | answer: 207300000001c370
request: 20030000000d82be: slave 32 ($20), register 0 ($00), 13 registers | answer: 20031A0000000100000001000000010000000100000001000000010006767
request: 20030000000d82be: slave 32 ($20), register 0 ($00), 13 registers | answer: 20031A0000000100000001000000010000000100000001000000010006767
request: 20030000000d82be: slave 32 ($20), register 0 ($00), 13 registers | answer: 20031A0000000100000001000000010000000100000001000000010006767
...
- Exit from screen command using the sequence (Control+a)+d
Injection:
Consumption:
Trend:
485 Connection:
RBPi2:
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent