求更新800 G1 DM的EFI，谢谢！

Hello, I want to update your EFI file. I have the same 800 G1 DM. Thank you!

史上最完美800G1-USDT oc efi

OpenCore-HP-800G1-USDT-HD4600

OpenCore for HP 800G1 USDT with HD4600 and Intel WLAN

OC information

• OC Version: 0.7.0
• Tested OS Version: 11.4 (20F71)

Working

• WIFI
• Sound
• USB Port(fixed on 0.7.0)

Not working

• 4K (No equipment for testing, if you have one, you can submit PR)

Before installation

star this project ( > ω < )

Don't try to use the VGA port to boot!

Edit config.plist

At first, please complete the 'PlatformInfo' by yourself. https://dortania.github.io/OpenCore-Install-Guide/config.plist/haswell.html#platforminfo

• PlatformInfo>Generic>MLB
• PlatformInfo>Generic>ROM
• PlatformInfo>Generic>SystemSerialNumber
• PlatformInfo>Generic>SystemUUID

BIOS Settings

Disable

• Fast Boot -> Disabled
• Secure Boot -> Disabled
• Security -> VTd -> Disabled

Set

• Storage -> Storage Options -> SATA Emulation > AHCI

Kext information

下载地址：

https://github.com/LemoFire/OpenCore-HP-800G1-USDT-HD4600/archive/refs/tags/OC0.7.0-1.zip

我也是这款机器 咱们配置差不多 升级到11.6.1之后声卡没了
我在官网看参数是ALC221 布局id为11 15 88 我都试过了alcid= 并没有反应
参考你的device properites填写也不行
我是oc6.4 请求指点迷津

我用您的EFI，发现网卡不能驱动，然后手动把Intel那个通用网卡驱动，弄到/L/E下才行，现在就差睡眠了。

我更新到12.0.1也有毛边问题 后来通过系统升级到12.2 12.3毛边就没有了

I come from China, your efi is perfect

系统版本：11.5.1
简单配置：4690+16G（1600）+256G+BCM94360CS2
状态：基本所有功能可用，我删除了博通网卡的驱动，因为用的白果卡，睡眠、隔空投送、隔空接力、USB全部可用
一些问题：不知道你在12版本里面用的咋样，我从11.5.1升级以后，升级之前EFI分区里的文件就进不了系统了，不过我有备份EFI可以使用，今天更新了7.2，偶尔还是进不了系统很随机，还有个小问题是这个EFI好像用不了双屏幕

如题 请问是仿冒什么硬件的pciid用的
我的bcm94352（dw1550）在12.0.1下完全挂了
下载最新的bcm四件套依然驱动不上 请求指点迷津

我昨天升级了一下，进系统过一阵就死机，是完全抹除硬盘以后安装的新系统

Hey, thank you for your effort making this config. Unfortunately i can't boot using both DisplayPorts at once, can't even connect after the system booted using only one port. It's getting stuck at IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0. It boots perfectly using just one monitor.

I'm using the HP EliteDesk 800 G1 SFF, i wanted to put a GT 730 low profile in it and i had this GPU working in a HP Compaq 6300 Elite, running Catalina. I tried to install Catalina/Big Sur without dGPU and using just one monitor with DisplayPort and it worked flawlessly. But every config i'm trying (your one was the best so far), i'm not getting it to work after connecting a second monitor via DisplayPort. My CPU is i5-4590. I also have a EliteDesk 800 G1 USDT, running Catalina and using a config for TW, SFF and USDT from insanelymac.com where both DisplayPorts are working, but even with that config i can't get it to work on my SFF. Is there anything i might be missing? I'm using BIOS defaults and settings from your readme, updated my BIOS and tried different SMBIOSes.

The final setup should be capable running four monitors, two of them running through DisplayPort on iGPU and two running trough HDMI and DVI on dGPU. Had this also working on a Optiplex 9010 with a 4x HDMI GT 710, but switched to EliteDesk again and now i'm stuck.

I know this isn't a tech support thread, but you've got me very far until now and any help would be greatly appreciated.