The folowing is from n0bel/ESPrinkler2. The code here has some small changes to incorporate a Master Solenoid control. See https://youtu.be/FuQVv96XGbQ for a video of my hardware.
This is a totally rewritten second version of https://github.com/n0bel/ESPrinkler Consider that code now totally obsolete.
This project uses Arduino/ESP8266 to create a web based lawn/garden sprinkler controller.
- Web server based (ESP8266WebServer)
- Responsive UI (desktop/mobile/tablet) written around Jquery, Foundation5, and jsoneditor
- 8 Zones (relays)
- Up to 30 Schedules
- NTP Time (or set from browser)
- RTC Option pcf8563 or ds1307
- OLED Display Option
- ArduinoOTA update (code and spiffs)
- HTTP Server Update (code and spiffs)
- ESP-12x (nodemcu, hazza, D1 Mini) (probably others)
- 74HC595
- ST1306 OLED
- PCF8563 or ds1307 (optional)
- Relays
- Arduino-1.8.5
- ESP8266/Arduino :Current Additional Boards Manager URL: https://github.com/esp8266/esp8266.github.io
- Version 2.5.2 https://github.com/esp8266/esp8266.github.io/blob/c6ddb5c67bbc11052dcc4d3c872d92c874f97bed/stable/package_esp8266com_index.json
- ESP8266/Arduino 2.5.2 https://github.com/esp8266/Arduino/releases/tag/2.5.2
- Time 1.5.0 https://github.com/PaulStoffregen/Time
- SimpleTimer https://github.com/jfturcot/SimpleTimer (http://playground.arduino.cc/Code/SimpleTimer)
- NtpClientLib 2.0.5 https://github.com/gmag11/NtpClient
- ArduinoJson 5.6.7 https://github.com/bblanchon/ArduinoJson (https://bblanchon.github.io/ArduinoJson/)
- U8G2Lib 2.13.5 https://github.com/olikraus/u8g2
- orbitalair-arduino-rtc-pcf8563 https://bitbucket.org/orbitalair/arduino_rtc_pcf8563/downloads/ (https://playground.arduino.cc/Main/RTC-PCF8563)
This project requires DIY assembly and soldering skills. At this time there is no pre-made board. I've made two of these systems so far, and both of them are done with proto boards and point to point wiring and assembled in a water resistant project box.
An ESP8266 with 4MB (32Mb) of flash is required. The software makes extensive use of the flash storage for both OTA updates and spiffs. Generally this is an ESP-12x, but other models may be used. In my case I used a WeMos D1 Mini as the ESP8266 board. I had some in the junk box and it has the 3.3v regulator, and the usb to serial interface built on board. It also includes a nodemcu type reset and programming circuit.
The 8 relays are controlled through a 74HC595 8 bit shift register. This is simply wired to the SPI interface of the ESP8266 (CS (GPIO15), CLK (GPIO14), MOSI (GPIO13) connected to Latch, Clock and Data In of the 74HC595).
The shift register outputs are then connected via resistors (10k or so) to the 8 NPN transistors acting as relay drivers. In my particular case I had some quad transistors in a 14 pin dip package in my junk box.
These transistors then drive 8 mini 5v relays. The relay contacts connect 24vac to the corresponding output, and therefore energize a sprinkler solenoid.
A 24vac center tapped transformer powers it all. One leg of the transformer output is ground for the circuit, the other side is routed to the relays to control the solenoids. The center tap is rectified through a single diode to feed the input of a buck type dc-dc switch mode converter. The output of the convert is set to 5v and is routed to the relays and to the D1 Mini.
The ST1306 OLED is an I2C device and therefore connected to SCL (GPIO5) and SDA (GPIO4) of the ESP8266.
For the optional real time clock (pcf8563 or ds1307), I rigged that up on a proto board stacked on the D1 Mini using stacking pins.
The following schematic can be used as a guide. A Fritzing file is also included. It is also just a guide. Again DIY assembly and soldering skills are required to complete this project.
Don't forget to restart the Arduino IDE after installing the libraries and boards (See the list previously under Software).
Set your esp settings.. the board, programing method, flash size 4M3M.
This uses the SPIFFS file system. So we need to load that in your esp-12x first. For quicker loading of web pages, almost all the files on the spiffs flash are gzip compressed and they have the suffix ".gz". The uncompressed data version of all the files is the "Master" in the "data-uncompressed" folder. The compress-data.cmd file (windows) will compress the data in preparation for uploading. If you've not made any changes to the contents of data-uncompressed, you don't need to do this step.
Upload the contents of the data folder with MkSPIFFS Tool ("ESP8266 Sketch Data Upload" in Tools menu in Arduino IDE)
Then compile and upload the .ino.
When initially powered on, the internet access point will not be setup. The ESPrinkler will therefore switch to AP mode. It will be come an access point in itself.
So connect to ESPrinkler2_XXXXXX with a wifi enabled device (no password).
Browse to 192.168.4.1
The initial page will let you toggle the relays on/off to test.
But the first thing you'll want to do is click "Set Time from Browser". Both the time and the correct time zone are now set up.
Now go to the Configuration page
Set a host name. This will help allow you to access the device from your browser (if you can use mDNS).
Set your access point name and password. You have 2 choices here.
- If you want to connect the device to your network, fill in your access point SSID and password.
- If you want to leave it as a stand alone access point all by itself, fill in the second set of SSID and Password, to secure the access point.
Click Save Configuration, then click Restart.
What is it's IP? If your computer supports mDNS (Anything but windows, but even on windows it'll be there if you have loaded iTunes), you can access it with the following url: http://<host>.local/, where <host> is the host you specified in your configuration. If you don't have mDNS available, you must find the IP address of the ESPrinkler2 through one of the following methods (or make up your own method)
- Look at the OLED display (if you're using one)
- Log into your router and look at the dhcp leases (sometimes called dhcp client list) find the entry that shows ESP_xxxxxx
- Connect a serial ttl dongle to the ESPrinkler2, set the baud rate to 74880. During startup, you'll see the IP address shown.
- Get mDNS on your computer: here's some info for windows: http://stackoverflow.com/questions/23624525/standard-mdns-service-on-windows
- ping from a computer that does handle mDNS -- ping <hostname>.local
The Main web page of ESPrinkler2 allows you to test each of the 8 relays. Of course it also allows navigation to the other pages. The web pages use a combination of jQuery, and Foundation5 to create a simple UX that is also responsive to Desktop, Mobile and Tablet formats. In addition JsonEditor is used to simplify entering/editing the settings and schedules. The frameworks are all loaded onto the spiffs of the device, so it will work even when no internet is connected.
The OLED screen gives the current status of the device, as well as its IP address.
The top line will show the WiFi Status. - STA: IP address means connected in Station mode to an access point. - AP: IP address means it is acting as an access point. The second line
will show the access point name
- DIS: means it is disconnected.
The bottom line shows that status of each zone (relay).
The schedules page allows adding, specifying and arranging schedules of when to turn on and off each zone (relay). Start time, duration, days of week, are each set for each schedule. Up to 30 schedules may be setup.
The image page gives you a graphical representation of each sprinkler zone. This is handy when testing your sprinklers and setting them up.
There is a default image supplied, and by default 8 buttons, representing each zone appear along the top of the image. The image could be a sketch or a satellite image of the are the sprinklers are installed.
The "Move Buttons" button can be activated, and the buttons may be moved around the image (mouse or touch) to indicate which zone is where on the image. "Save Buttons" then saves the button locations.
The name of the image file is simply "image.jpg" and it can be placed into the data-uncompressed and/or data folder before loading the spiffs into the device. It can also be uploaded using the built in spiffs editor (discussed later in this document.)
The configuration page allows you to set the ESPrinkler2 as needed.
The save and load configuration buttons are self explanatory. Restart is a reset of the ESP8266. The "Clean" button clears all configuration (and schedules and button settings).
Config Item | Description |
---|---|
Host Name | The name you give to the device. No spaces allowed The default access point name, and the mDNS name will use this name. If not specified ESPrinkler2_XXXXXX (XXXXXX) is the chipid of the device. |
Your Access Point SSID | If you want to connect the device to your WiFi network enter its SSID here. |
Password of your Access Point | The password of your access point. |
SSID when acting as an access point | If you want the device to act as a stand alone access point (i.e. no internet, only direct connect) specify that SSID here. If blank, it will default as the Host Name (or host name default) |
Password when acting as an access point | The password for securing the access point. |
Timezone Offset in seconds | The timezone offset in seconds. How many seconds ahead (positive) or behind (negative) of UTC There is a button to allow this to be set from the browser. If you use -1, the last offset specified by Set Time from browser on the main page will be used. |
NTP Time Server | What time server to use for getting NTP time. Note this only works when the device is connected to an access point that has internet access. |
On the Configuration Page, there is a "Software Upload" button. This allows new firmware or a new spiffs binary to be loaded directly from your browser. Simply choose the binary image to upload, and then click "Upload!". This process can take some time. You can check progress on the OLED screen.
On the Configuration Page, there is a "SPIFFS Editor" button. This allows you to upload, delete and change the files that the web server uses.