I always get this Error: failed to grab droptime: failed to grab droptime with status 400 Bad Request and body "{"error":"username not dropping"}"

Bug Report

Description

Snipe failed, presumably because the program doesn't support prename and that's not specified anywhere.

Steps to reproduce

Try to snipe using an account that hasn't claimed its first username yet

Expected result

Either snipe succeeded or someone actually claims the name before me

Actual result

[info] » Sniping g51 at 2021/10/18 08:42:31

[info] » authenticating <censored> through ms auth
[success] » successfully authenticated <censored>
[err] » failed to verify that <censored> can snipe: failed to grab name change info
[err] » <censored> not ready to snipe
[fatal err] » no accounts successfully authenticated!

Complete output

(already above)

PS, do you know how annoying this issue form is? I have to spread the information out across many sections when it would be much more natural to explain it in a single paragraph with output below.

Changes that should be made:

• Pin an issue for smaller bugs
  • See Apollo Lake Platform Validation for a good example of how this could look
• Add a stable branch Use a dev branch for development
• Only release changes as stable when main is updated and stable
• Mark unstable builds (builds from main branch) as pre-release
• Add issue template
  • Check ISSUE_TEMPLATE.md for an example template
• Add PR template
  • Check PULL_REQUEST_TEMPLATE.md for an example template
• Add a CONTRIBUTORS.md file
  • These are typically used for listing contributors and listing what all can be done as a contribution
• Move documentation to another markdown file
• Add mirrors on other sites such as Gitlab or Bitbucket
  • Although this is a good idea, do this at your own free will

I open cmd and type "MCsniperGO_2.96_windows_64-bit.exe as".
It returns with: "[fatal err] » failed to grab next 3c with status 522 and body ""
[input] press enter to exit »

"

I get a 403 error when trying to snipe a name. (Microsoft) I used a bearer token

I typed in the code to link my account and it seemed to work but then it started to crash and say it failed to authenticate my account, I don’t know why this happens but help would be nice.

ryan#0344 #support

Fortnite battel pass

^

Change issue format

Originally posted by @Kqzz in #11 (comment)

I have no idea what an offset is. Is it the time that the program waits after the username is free to try claiming it? Does it try to claim slightly early to account for network lag? What unit is it in? Seconds? Milliseconds? This offset is never explained anywhere. I just tried using 0.1 but I don't know if that's fine or not

[input] offset » 0.05
[info] » Sniping y1t at 2021/10/18 12:51:48

[info] » authenticating <censored> through ms auth
[success] » successfully authenticated <censored>
[success] » verified that <censored> can snipe
sniping in 21s
starting in 20s...
[info] » sent @ 12:51:48.0053
[info] » sent @ 12:51:48.0106
[info] » sent @ 12:51:48.0155
[info] » sent @ 12:51:48.0201
[info] » sent @ 12:51:48.0264
[info] » sent @ 12:51:48.0313
[info] » [400] received @ 12:51:48.1029 | est process @ 12:51:48.053
[info] » [400] received @ 12:51:48.1087 | est process @ 12:51:48.059
[info] » [400] received @ 12:51:48.1125 | est process @ 12:51:48.063
[info] » [400] received @ 12:51:48.1209 | est process @ 12:51:48.07
[info] » [400] received @ 12:51:48.128 | est process @ 12:51:48.077
[info] » [400] received @ 12:51:48.1392 | est process @ 12:51:48.085

In the log file, it is simply:

accounts
<censored>:<censored> | Type: microsoft prename account
logs
sent @ 12:51:48.0053
sent @ 12:51:48.0106
sent @ 12:51:48.0155
sent @ 12:51:48.0201
sent @ 12:51:48.0264
sent @ 12:51:48.0313
[400] received @ 12:51:48.1029
[400] received @ 12:51:48.1087
[400] received @ 12:51:48.1125
[400] received @ 12:51:48.1209
[400] received @ 12:51:48.128
[400] received @ 12:51:48.1392

I wish I could give you more useful info, but it seems that not even the log file actually contains response bodies, so we might never know what went wrong.

Minor problem mega-issue

What's this?

This issue is for minor problems that don't deserve a whole issue but can still be reported.

What should I use this for?

Here's a few examples:

• typos
• formatting issues
  • random newline mid-sentence
  • for example, like this
• features that shouldn't be in MCsniperGO anymore

What shouldn't I use this for?

Things like:

• droptime calculations not working
  • this refers to actual timing issues
    • api outages should go here
• optimizations
  • use if you like, but for the most part PRs do the trick

How do I use this?

Copy all the text in the codeblock below this and paste into a reply. Edit as needed, and submit!

# Issue
<!--
All text put inside < !-- and -- > (spaces on bigger side removed) are not visible when submitted.
Don't put any text for the actual bug report inside these.
Check to make sure this isn't a duplicate issue for this version, please!
-->

## Description
<!-- Put a short description of what happened below this line. -->

## Steps to reproduce (if applicable)
<!-- If applicable, put the steps to reproduce the bug here. Put `N. ` (no backticks), once per line,
for each step, replacing N with the step number. Put it below this line.  -->

## Expected result
<!-- What should have happened? Put what is supposed to happen. Don't account for the bug here. Put it below this line. -->

## Actual result
<!-- What actually happened? This should be similar to the descripition. Put it below this line. -->

## Related output
<!-- Put any output that is related to the issue (i.e. the few lines before and after a typo and the typo itself too. Stick it between the ```sh and ```, please.
```sh

```

does that mean that it failed to snipe? I tried 5 Names and i got nothing :(

Trying to use a socks5 proxy that requires auth, but it seems to fail with error:
[*] the server closed connection before returning the first response byte. Make sure the server returns 'Connection: close' response header before closing the connection #1
My proxies are in the list in the format:
user:pass@address:port
as suggested by the readme.
I made an attempt to play around with the code a little bit and noticed a function SetProxy in http.go that seems to check if it is a socks proxy and work differently, but it doesn't seem as though this function is ever called.
I tried to make it work anyways by formatting my proxies as user:pass@socks5://ip:port but I think my attempts are in vain.
Appreciate any help <3

auth doesnt work for gcs dont work, only 3 accounts are actually authed while the rest are rate limited even if you change auth delay to 21+

Would a good idea for the offset be setting it to my ping to minecraft.net?

Hey,
Is there anyway I can find out what offset is good?
Is there a command I can do to find the right offset?

microsoft account belongs to someone under 18! add to gamily for this to work

getting this error, i changed the birth date to something over 18, added to a family (where my other account is the owner)

any fix?

For some reason my sniper is off by 1 hour and I don't know why, its also only off by 1 hour on name mc but nothing else

I've tried to use the bearer token instead but I'm getting errors.

What's wrong with this format?

bearer

bearer:CENSORED
Please give me the correct format as this isn't working and I've tried multiple syntax's.

I have a fresh account with no name history, and am hoping to snipe a good name, but this happens whenever it logins in

[info] » authing xxxx-xxxx through manual bearer
[info] » bearer expires in: 16h9m8.047644042s
[success] » successfully authenticated xxxx-xxxx
[err] » failed to verify that xxxx-xxxx can snipe: prename acc: got status: 403 Forbidden body: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<HTML><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<TITLE>ERROR: The request could not be satisfied</TITLE>
</HEAD><BODY>
<H1>403 ERROR</H1>
<H2>The request could not be satisfied.</H2>
<HR noshade size="1px">
Request blocked.
We can't connect to the server for this app or website at this time. There might be too much traffic or a configuration error. Try again later, or contact the app or website owner.
<BR clear="all">
If you provide content to customers through CloudFront, you can find steps to troubleshoot and help prevent this error by reviewing the CloudFront documentation.
<BR clear="all">
<HR noshade size="1px">
<PRE>
Generated by cloudfront (CloudFront)
Request ID: yykIxmmDARMHOlF-bCicQRZNPHVhhDtOqG1L-I2DZVPuP7gjHyQy4g==
</PRE>
<ADDRESS>
</ADDRESS>
</BODY></HTML>
[err] » xxxx-xxxx cannot create profile: prename acc: got status: 403 Forbidden body: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<HTML><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<TITLE>ERROR: The request could not be satisfied</TITLE>
</HEAD><BODY>
<H1>403 ERROR</H1>
<H2>The request could not be satisfied.</H2>
<HR noshade size="1px">
Request blocked.
We can't connect to the server for this app or website at this time. There might be too much traffic or a configuration error. Try again later, or contact the app or website owner.
<BR clear="all">
If you provide content to customers through CloudFront, you can find steps to troubleshoot and help prevent this error by reviewing the CloudFront documentation.
<BR clear="all">
<HR noshade size="1px">
<PRE>
Generated by cloudfront (CloudFront)
Request ID: yykIxmmDARMHOlF-bCicQRZNPHVhhDtOqG1L-I2DZVPuP7gjHyQy4g==
</PRE>
<ADDRESS>
</ADDRESS>
</BODY></HTML>
[fatal err] » no accounts successfully authenticated
[input] press enter to exit »

accounts.txt format:

SECRET_TEXT_GOES_HERE:bearer:prename

More specifically, what protocols can I use as an input for proxies.txt?
EX: http, https, Socks4

Bug Report

Something went wrong and should be reported.

All text put inside < !-- and -- > (spaces on bigger side removed) are not visible when submitted.
Don't put any text for the actual bug report inside these.
Check to make sure this isn't a duplicate issue.

If you feel like this issue template is pointless for your issue (i.e. too small to put in it's own issue) just press CTRL-A and delete all the content.
This is only a suggestion for how it should be done, you do not need to abide by it.
-->

Description

Steps to reproduce

Expected result

Actual result

Complete output

# START OUTPUT

# END OUTPUT

Hello!

I'm new in the bot sniping community. From what i saw, claiming names by handsniping isn't worth trying nowadays, and wanted to try new method. But i have one question. I kind of know what offset is, but is there any way of checking the perfect delay in the program or on a webpage? If not, will custom offset from mcsniperpy be okay?

Thank you in advance,
Redmix

@everyone

Bug Report

I can't seem to get MCsniperGO to work on my iMac.

It wasn't making an accounts.txt file in the first place, so I made it myself, which I thought was fine. But now when I add my account details and/or bearer token into that file, the MCsniperGO will give an error "please put one account in the accounts.txt file"

I'm certain I followed the correct template on what credentials to put in.

Could anyone provide me with some help? I'm completely clueless on what to do.

Bug Report

Something went wrong and should be reported.

Description

Steps to reproduce

Expected result

Actual result

Complete output

# START OUTPUT

# END OUTPUT

Bug Report

Hi. so i have a problem because when sniper is about to snipe nickname it crashes it might be problem with windows 11 but i dont know.
I tried asking on discord for help but no one knew what was really going

(logs are normal)

i need an ubuntu tutorial please

hi discord

Bug Report

Something went wrong and should be reported.

Description

Steps to reproduce

Expected result

Actual result

Complete output

# START OUTPUT

# END OUTPUT

Hi, my prename account does not work and it says
successfully authenticated [email protected]
[err] » failed to verify that [email protected] can snipe: prename acc: account is not authenticated
[err] » [email protected] not ready to snipe

What do i have to do when i want the Sniper to snipe with 2 Accounts?
Like what format should i type in accounts.txt
I use bearer token btw

Bug Report

Something went wrong and should be reported.

Description

Whenever I try to snipe I just get a 403.

Steps to reproduce

I dont know if anyone else is having this problem so it may not be easy to preproduce

Expected result

Is what should have happened is that I should have gotten the name.

Actual result

Instead I get an Error 403 which makes no sense because the program has been updated recently

Complete output

I am so sorry but I closed my CMD window and handsniped a name on the account sense then. So I have no accounts to snipe left. 
It said something that had Error 403 in red in it.

Is it possible? Would like to snipe without disabling 2FA